Miner's inch

The miner's inch is a unit of flow in terms of volume per unit time, usually in relation to the flow of water. The definition of a miner's inch varies by location.

In hydraulic mining and some forms of placer mining, as well as ore dressing, a large and regular supply of water is needed. The miner's inch is a method of measuring the amount of flow a particular water supply system (such as a flume or sluice) is capable of supplying.

The miner’s inch was derived from the amount of water that would flow through the hole of a given area at a given pressure (for example, 4-6 inches of water, or 1-1.5 kPa). The word 'inch' actually refers to the area of the hole in 'square inches'.

Definition

Historically, the unit lacked a firm definition or equivalent measurement, and varied by location, leading to confusion within the mining industry.[1][2] In 1905, its usage in California was standardized.[2] Today, the standards are:

State regulations sometimes forbid the use of the unit without its being associated with a definition in the same document.

References

  1. Placer Mining. Scranton, PA: Colliery Engineering Co. 1897. pp. 76–80.
  2. 1 2 Wilson, E. B. (1907). Hydraulic and Placer Mining. New York: John Wiley & Sons. pp. 91–92.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.