Luminance

Luminance is a photometric measure of the luminous intensity per unit area of light travelling in a given direction. It describes the amount of light that passes through, is emitted or reflected from a particular area, and falls within a given solid angle. The SI unit for luminance is candela per square metre (cd/m2). A non-SI term for the same unit is the nit. The CGS unit of luminance is the stilb, which is equal to one candela per square centimetre or 10 kcd/m2.

Explanation

Luminance is often used to characterize emission or reflection from flat, diffuse surfaces. The luminance indicates how much luminous power will be detected by an eye looking at the surface from a particular angle of view. Luminance is thus an indicator of how bright the surface will appear. In this case, the solid angle of interest is the solid angle subtended by the eye's pupil. Luminance is used in the video industry to characterize the brightness of displays. A typical computer display emits between 50 and 300 cd/m2. The sun has luminance of about 1.6×109 cd/m2 at noon.[1]

Luminance is invariant in geometric optics.[2] This means that for an ideal optical system, the luminance at the output is the same as the input luminance. For real, passive, optical systems, the output luminance is at most equal to the input. As an example, if one uses a lens to form an image that is smaller than the source object, the luminous power is concentrated into a smaller area, meaning that the illuminance is higher at the image. The light at the image plane, however, fills a larger solid angle so the luminance comes out to be the same assuming there is no loss at the lens. The image can never be "brighter" than the source.

Definition

Parameters for defining the luminance

The luminance of a specified point of a light source, in a specified direction, is defined by the derivative

where

  • Lv is the luminance (cd/m2),
  • d2Φv is the luminous flux (lm) leaving the area dΣ in any direction contained inside the solid angle dΩΣ,
  • dΣ is an infinitesimal area (m2) of the source containing the specified point,
  • dΩΣ is an infinitesimal solid angle (sr) containing the specified direction,
  • θΣ is the angle between the normal nΣ to the surface dΣ and the specified direction.[3]

If light travels through a lossless medium, the luminance does not change along a given light ray. As the ray crosses an arbitrary surface S, the luminance is given by

where

  • dS is the infinitesimal area of S seen from the source inside the solid angle dΩΣ,
  • dΩS is the infinitesimal solid angle subtended by dΣ as seen from dS,
  • θS is the angle between the normal nS to dS and the direction of the light.

More generally, the luminance along a light ray can be defined as

where

  • dG is the etendue of an infinitesimally narrow beam containing the specified ray,
  • dΦv is the luminous flux carried by this beam,
  • n is the index of refraction of the medium.

Relation to Illuminance

The luminance of a reflecting surface is related to the illuminance it receives:

where the integral covers all the directions of emission ΩΣ, and

In the case of a perfectly diffuse reflector (also called a Lambertian reflector), the luminance is isotropic, per Lambert's cosine law. Then the relationship is simply

Units

A variety of units have been used for luminance, besides the candela per square metre.

One candela per square metre is equal to:

Health effects

Retinal damage can occur when the eye is exposed to high luminance. Damage can occur due to local heating of the retina. Photochemical effects can also cause damage, especially at short wavelengths.

Luminance meter

A luminance meter is a device used in photometry that can measure the luminance in a particular direction and with a particular solid angle. The simplest devices measure the luminance in a single direction while imaging luminance meters measure luminance in a way similar to the way a digital camera records color images.[4]

See also

SI photometry quantities
Quantity Unit Dimension Notes
Name Symbol[nb 1] Name Symbol Symbol[nb 2]
Luminous energy Qv [nb 3] lumen second lm⋅s TJ The lumen second is sometimes called the talbot.
Luminous flux / luminous power Φv [nb 3] lumen (= cd⋅sr) lm J Luminous energy per unit time
Luminous intensity Iv candela (= lm/sr) cd J Luminous flux per unit solid angle
Luminance Lv candela per square metre cd/m2 L−2J Luminous flux per unit solid angle per unit projected source area. The candela per square metre is sometimes called the nit.
Illuminance Ev lux (= lm/m2) lx L−2J Luminous flux incident on a surface
Luminous exitance / luminous emittance Mv lux lx L−2J Luminous flux emitted from a surface
Luminous exposure Hv lux second lx⋅s L−2TJ Time-integrated illuminance
Luminous energy density ωv lumen second per cubic metre lm⋅s⋅m−3 L−3TJ
Luminous efficacy η [nb 3] lumen per watt lm/W M−1L−2T3J Ratio of luminous flux to radiant flux or power consumption, depending on context
Luminous efficiency / luminous coefficient V 1 Luminous efficacy normalized by the maximum possible efficacy
See also: SI · Photometry · Radiometry
  1. Standards organizations recommend that photometric quantities be denoted with a suffix "v" (for "visual") to avoid confusion with radiometric or photon quantities. For example: USA Standard Letter Symbols for Illuminating Engineering USAS Z7.1-1967, Y10.18-1967
  2. The symbols in this column denote dimensions; "L", "T" and "J" are for length, time and luminous intensity respectively, not the symbols for the units litre, tesla and joule.
  3. 1 2 3 Alternative symbols sometimes seen: W for luminous energy, P or F for luminous flux, and ρ or K for luminous efficacy.

References

  1. "Luminance". Lighting Design Glossary. Retrieved Apr 13, 2009.
  2. Dörband, Bernd; Gross, Herbert; Müller, Henriette (2012). Gross, Herbert, ed. Handbook of Optical Systems. 5, Metrology of Optical Components and Systems. Wiley. p. 326. ISBN 978-3-527-40381-3.
  3. Chaves, Julio (2015). Introduction to Nonimaging Optics, Second Edition. CRC Press. p. 679. ISBN 978-1482206739. Archived from the original on 2016-02-18.
  4. "e-ILV : Luminance meter". CIE. Retrieved 20 February 2013.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.