Lopper II Rail Tunnel

Lopper II Rail Tunnel
Overview
Line Luzern–Stans–Engelberg
Location Nidwalden, Switzerland
Coordinates 46°58′39″N 8°19′10″E / 46.977403°N 8.319437°E / 46.977403; 8.319437Coordinates: 46°58′39″N 8°19′10″E / 46.977403°N 8.319437°E / 46.977403; 8.319437
Status Active
Operation
Owner Zentralbahn
Operator Zentralbahn
Traffic Rail
Character Passenger and freight
Technical
Length 1,743 metres (5,719 ft)
No. of tracks 1
Track gauge 1,000 mm (3 ft 3 3⁄8 in)
Electrified Overhead catenary
11 kV AC 16 2/3 Hz

The Lopper II Rail Tunnel is a railway tunnel in the canton of Nidwalden in central Switzerland. It forms part of the Zentralbahn Luzern–Stans–Engelberg line, which links Lucerne with Engelberg, between Hergiswil station and Stansstad station. It is 1,743 metres (5,719 ft) in length, and carries metre gauge (1,000 mm or 3 ft 3 3⁄8 in) track electrified at 11 kV AC 16 2/3 Hz using overhead catenary. The tunnel runs under the Lopper, a shoulder of Mount Pilatus which extends into Lake Lucerne, and immediately on leaving the tunnel the line crosses a bridge over the Alpnachersee arm of Lake Lucerne before entering Stansstad station.[1][2]

The Lopper II Tunnel is paralleled by the Kirchenwald Tunnel carrying the A2 motorway. The nearby Lopper Tunnel I is a rail tunnel on the Zentralbahn Brünig line, the two rail lines joining at Hergiswil station.[1][2]

References

  1. 1 2 map.geo.admin.ch (Map). Swiss Confederation. Retrieved 2014-07-25.
  2. 1 2 Eisenbahnatlas Schweiz. Verlag Schweers + Wall GmbH. 2012. p. 22. ISBN 978-3-89494-130-7.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.