Leduc 0.22

0.22
Leduc 0.22 preserved in the Musée de l'Air et de l'Espace at Le Bourget
Role Research aircraft
National origin France
Manufacturer Breguet
Designer René Leduc
First flight 26 December 1956
Number built 1

The Leduc 0.22 was the prototype of a Mach 2 fighter built in France in 1956.

Design

It was the first attempt at a practical application of the ramjet technology that had been developed in the 0.10 and 0.21 research aircraft over the previous years. Unlike all previous Leduc aircraft, it featured swept wings and a coaxial turbojet-ramjet powerplant to enable unassisted operation.

Test flights

First flown on 26 December 1956 on turbojet power alone, the ramjet was finally fired on the 34th flight, on 18 May 1957. Another 80 flights took place before the cancellation of the project in favour of the more conventional Dassault Mirage III. A second prototype was under construction at the time.

End of operations

Although intended to be a supersonic fighter, the 0.22 proved unable to exceed the speed of sound (Mach 1) because of the prohibitive drag induced by its non-area-ruled fuselage at near-sonic speeds. The cancellation of the project marked the end of René Leduc's aircraft development activities.

Specifications

General characteristics

  • Crew: One pilot
  • Length: 18.21 m (59 ft 9 in)
  • Wingspan: 9.95 m (32 ft 8 in)
  • Wing area: 22.1 m2 (238 ft2)
  • Empty weight: 6,380 kg (14,040 lb)
  • Gross weight: 8,995 kg (19,789 lb)
  • Powerplant: 1 × Leduc ramjet, 63.7 kN (14,300 lbf) thrust
1 × SNECMA Atar 101D-3, 31.4 kN (7,040 lbf) thrust

Performance

  • Maximum speed: 1,200 km/h (750 mph)

References

  • Taylor, Michael J. H. (1989). Jane's Encyclopedia of Aviation. London: Studio Editions. p. 750.
  • World Aircraft Information Files. London: Bright Star Publishing. pp. File 900 Sheet 05.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.