In situ thermal desorption

In situ thermal desorption (ISTD) is an intensive thermally enhanced environmental remediation technology that uses thermal conductive heating (TCH) elements to directly transfer heat to environmental media. The ISTD/TCH process can be applied at low (<100 °C), moderate (~100 °C) and higher (>100 °C) temperature levels to accomplish the remediation of a wide variety of contaminants, both above and below the water table. ISTD/TCH is the only major in situ thermal remediation (ISTR) technology capable of achieving subsurface target treatment temperatures above the boiling point of water and is effective at virtually any depth in almost any media. TCH works in tight soils, clay layers, and soils with wide heterogeneity in permeability or moisture content that are impacted by a broad range of volatile and semi-volatile organic contaminants.

History

ISTD using TCH was developed by Shell Oil Co. in the late 1980s and grew out of research and development for enhanced oil recovery. During the mid-1990s Shell Oil Company commercialized ISTD with an investment of over $30 million. In 2000 TerraTherm, Inc.[1] secured exclusive licenses for the use of electric heater wells for ISTD. In 2012 Good Earthkeeping Organization (GEO), Inc. (GEO Inc.) entered into a license agreement with TPS TECH SA to manufacture and operate gas powered heater wells for ISTD. GEO Inc. has since submitted multiple patents for the manufacturing and use of Gas Thermal Remediation (GTR) heater units for the use in ISTD/(TCH) applications world wide.[2] Since 2004, HAEMERS© Technologies SA [3] using Smart Burners™ Technology was specifically developed to solve soil pollution problems. ISTD can solve remediation problems which could not be solved with other technologies. Each light weight heater is designed for in-situ works in open, as well as in confined environments (such as basements or under existing buildings). Smart Burners™ are designed also to recycle the energy contained in pollutants during the heating of soils.

Method of operation

Thermal conductive heating is the application of heat to subsurface soils through conductive heat transfer. The source of the heat is applied via electric or gas powered thermal wells. Thermal wells are inserted vertically, or horizontally, in an array within the soil. Heat flows from the heating elements by conduction. The heating process causes contaminants to be vaporized or destroyed by means of:

  1. evaporation
  2. steam stripping
  3. hydrolysis
  4. oxidation
  5. pyrolysis

Vaporized contaminants are collected from vapor extraction wells and containerized for removal or recycling.

See also

References

  1. ↑ "TerraTherm History".
  2. ↑ "GEO Inc".
  3. ↑ "HAEMERS© Technologies SA".
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.