List of International Organization for Standardization standards

This is a list of published^{[Note 1]} International Organization for Standardization (ISO) standards and other deliverables.^{[Note 2]} For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.^[1]

The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely and publicly available.^[2]

ISO 1 – ISO 99

ISO 1:2016 Geometrical product specifications (GPS) - Standard reference temperature for the specification of geometrical and dimensional properties
ISO 2:1973 Textiles – Designation of the direction of twist in yarns and related products
ISO 3:1973 Preferred numbers – Series of preferred numbers
ISO 4:1997 Information and documentation – Rules for the abbreviation of title words and titles of publications
ISO 5 Photography and graphic technology – Density measurements
ISO 6:1993 Photography – Black-and-white pictorial still camera negative film/process systems – Determination of ISO speed
ISO 7 Pipe threads where pressure-tight joints are made on the threads
ISO 8:1977 Documentation – Presentation of periodicals
ISO 9:1995 Information and documentation – Transliteration of Cyrillic characters into Latin characters – Slavic and non-Slavic languages
ISO 11:1987 Aircraft – Ground pressure testing connections for pressure cabins
ISO 12:1987 Aerospace – Pipelines – Identification
ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering – Dimensions, tolerances and verification
ISO 15:2017 Rolling bearings – Radial bearings – Boundary dimensions, general plan
ISO 16:1975 Acoustics – Standard tuning frequency (Standard musical pitch)
ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
ISO 18:1981 Documentation – Contents list of periodicals
ISO 21:1985 Shipbuilding – Inland navigation – Cable-lifters for stud-link anchor chains
ISO 22:1991 Belt drives – Flat transmission belts and corresponding pulleys – Dimensions and tolerances
ISO 23:1993 Cinematography—Camera usage of 35 mm motion-picture film—Specifications
ISO 25:1994 Cinematography—Camera usage of 16 mm motion-picture film—Specifications
ISO 26:1993 Cinematography—Projector usage of 16 mm motion-picture films for direct front projection—Specifications
ISO 28:1976 Cinematography—Camera usage of 8 mm Type R motion-picture film—Specifications
ISO 29:1980 Cinematography—Projector usage of 8 mm Type R silent motion-picture film for direct front projection—Specifications [Withdrawn without replacement]
ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000]
ISO 32:1977 Gas cylinders for medical use—Marking for identification of content
ISO 34 Rubber, vulcanized or thermoplastic—Determination of tear strength
- ISO 34-1:2015 Part 1: Trouser, angle and crescent test pieces
- ISO 34-2:2015 Part 2: Small (Delft) test pieces
ISO 35:2004 Natural rubber latex concentrate—Determination of mechanical stability
ISO 36:2017 Rubber, vulcanized or thermoplastic—Determination of adhesion to textile fabrics
ISO 37:2011 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
ISO 41:1980 Shipbuilding—Inland vessels—Covers for deck openings for pumps [withdrawn without replacement]
ISO 43:2016 Aircraft—Jacking pads
ISO 44:1975 Aerospace—Lever-operated, two-position, ON/OFF switches—Directions of operation
ISO 45:1990 Aircraft—Pressure refuelling connections
ISO 46:1973 Aircraft—Fuel nozzle grounding plugs and sockets
ISO 48:2010 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
ISO 50:1977 Metal pipes—Steel sockets screwed according to ISO 7 [Withdrawn without replacement]
ISO 53:1998 Cylindrical gears for general and heavy engineering—Standard basic rack tooth profile
ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering—Modules
ISO 55:1977 Seedlac—Specification [Withdrawn without replacement]
ISO 57:1975 Bleached lac—Specification [Withdrawn without replacement]
ISO 60:1977 Plastics—Determination of apparent density of material that can be poured from a specified funnel
ISO 61:1976 Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel
ISO 62:2008 Plastics—Determination of water absorption
ISO 63:1975 Flat transmission belts—Lengths [Withdrawn: Replaced with ISO 22]
ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
ISO 67:1981 Muscovite mica blocks, thins and films—Grading by size [Withdrawn without replacement]
ISO 68 ISO general-purpose screw threads – Basic profile
- ISO 68-1:1998 Part 1: Metric screw threads
- ISO 68-2:1998 Part 2: Inch screw threads
ISO 69:1998 Cinematography—16 mm motion-picture and magnetic film—Cutting and perforating dimensions
ISO 70:1981 Cinematography—35 mm negative photographic sound record on 35 mm motion-picture film—Position and maximum width dimensions
ISO 71:2014 Cinematography—16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film—Positions and dimensions
ISO 74:1976 Cinematography—Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film—Positions and dimensions
ISO 75 Plastics—Determination of temperature of deflection under load
- ISO 75-1:2013 Part 1: General test method
- ISO 75-2:2013 Part 2: Plastics and ebonite
- ISO 75-3:2004 Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 76:2006 Rolling bearings—Static load ratings
ISO 78 Chemistry — Layouts for standards^{[Note 3]}
- ISO 78-2:1999 Part 2: Methods of chemical analysis
- ISO 78-3:1983 Part 3: Standard for molecular absorption spectrometry [Withdrawn without replacement]
- ISO 78-4:1983 Part 4: Standard for atomic absorption spectrometric analysis [Withdrawn without replacement]
ISO/TR 79:2015 Reference materials - Examples of reference materials for qualitative properties
ISO 82:1974 Steel—Tensile testing [Withdrawn: replaced with ISO 6892-1]
ISO 83:1976 Steel—Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1]
ISO 86:1974 Steel—Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick [Withdrawn: replaced with ISO 6892-1]
ISO 89:1974 Steel—Tensile testing of wire [Withdrawn: replaced with ISO 6892-1]
ISO 90 Light gauge metal containers—Definitions and determination of dimensions and capacities
- ISO 90-1:1997 Part 1: Open-top cans
- ISO 90-2:1997 Part 2: General use containers
- ISO 90-3:2000 Part 3: Aerosol cans
ISO 91 Petroleum measurement tables [Withdrawn: replaced with ISO 91:2017]
- ISO 91-1:1992 Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F
- ISO 91-2:1991 Part 2: Tables based on a reference temperature of 20 degrees C
ISO 91:2017 Petroleum and related products - Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions
ISO 92:1976 Textile machinery and accessories—Spinning machinery—Definition of side (left or right)
ISO 93 Textile machinery and accessories—Cylindrical sliver cans
- ISO 93-1:2006 Part 1: Main dimensions
- ISO 93-2:2006 Part 2: Spring bottoms
ISO 94:1982 Textile machinery and accessories—Spindle gauges for ring-spinning and ring-doubling frames
ISO 96 Textile machinery and accessories—Rings and travellers for ring spinning and ring twisting frames
- ISO 96-1:2016 Part 1: Flange rings T and SF and their travellers
- ISO 96-2:2009 Part 2: HZ- and J-rings and their travellers
ISO 97:1975 Textile machinery and accessories—Rings for spinning, doubling and twisting for ear-shaped travellers [Withdrawn: replaced with ISO 96-2]
ISO 98:2001 Textile machinery and accessories—Spinning preparatory and spinning machinery—Main dimensions of coverings for top rollers

ISO 100 – ISO 199

ISO 100:1984 Pulleys for flat transmission belts—Crowns [Withdrawn: replaced with ISO 22]
ISO 102:1990 Aircraft—Gravity filling orifices
ISO 104:2015 Rolling bearings—Thrust bearings—Boundary dimensions, general plan
ISO 105 Textiles — Tests for colour fastness
- ISO 105-A01:2010 Part A01: General principles of testing
- ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour
- ISO 105-A03:1993 Part A03: Grey scale for assessing staining
- ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
- ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating
- ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour
- ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement
- ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques
- ISO 105-B01:2014 Part B01: Colour fastness to light: Daylight
- ISO 105-B02:2014 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
- ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure
- ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
- ISO 105-B05:1993 Part B05: Detection and assessment of photochromism
- ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
- ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration
- ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7
- ISO 105-B10:2011 Part B10: Artificial weathering—Exposure to filtered xenon-arc radiation
- ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering
- ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles
- ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
- ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering—Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
- ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda
- ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering
- ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent
- ISO 105-D02:2016 Part D02: Colour fastness to rubbing: Organic solvents
- ISO 105-E01:2013 Part E01: Colour fastness to water
- ISO 105-E02:2013 Part E02: Colour fastness to sea water
- ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water)
- ISO 105-E04:2013 Part E04: Colour fastness to perspiration
- ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid
- ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali
- ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water
- ISO 105-E08:1994 Part E08: Colour fastness to hot water
- ISO 105-E09:2010 Part E09: Colour fastness to potting
- ISO 105-E10:1994 Part E10: Colour fastness to decatizing
- ISO 105-E11:1994 Part E11: Colour fastness to steaming
- ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling
- ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe
- ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild
- ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics
- ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric
- ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics
- ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric
- ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric
- ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric
- ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric
- ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric
- ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth
- ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre
- ISO 105-G01:2016 Part G01: Colour fastness to nitrogen oxides
- ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes
- ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere
- ISO 105-G04:2016 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities
- ISO 105-J01:1997 Part J01: General principles for measurement of surface colour
- ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness
- ISO 105-J03:2009 Part J03: Calculation of colour differences
- ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02)
- ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite
- ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide
- ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
- ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
- ISO 105-N05:1993 Part N05: Colour fastness to stoving
- ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)
- ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating
- ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air
- ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride
- ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam
- ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride
- ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid
- ISO 105-X04:1994 Part X04: Colour fastness to mercerizing
- ISO 105-X05:1994 Part X05: Colour fastness to organic solvents
- ISO 105-X06:1994 Part X06: Colour fastness to soda boiling
- ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool
- ISO 105-X08:1994 Part X08: Colour fastness to degumming
- ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde
- ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
- ISO 105-X11:1994 Part X11: Colour fastness to hot pressing
- ISO 105-X12:2016 Part X12: Colour fastness to rubbing
- ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
- ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
- ISO 105-X16:2016 Part X16: Colour fastness to rubbing—Small areas
- ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials
- ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
- ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
- ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres
- ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes
- ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes
- ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration
- ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes
- ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
- ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes
- ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution
- ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions
ISO 108:1976 Textile machinery and accessories—Weaving looms—Definition of left and right sides
ISO 109:1982 Textile machinery—Working widths of weaving machines
ISO 110:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) – Half angle of the cone 9 degrees 15' [Withdrawn without replacement]
ISO 111:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) – Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]
ISO 112:1983 Textile machinery and accessories—Cones for yarn winding (cross wound) – Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]
ISO 113:2010 Rolling bearings—Plummer block housings—Boundary dimensions
ISO 114:1980 99.8 Unalloyed magnesium ingots—Chemical composition [Withdrawn: Replaced by ISO 8287]
ISO 115:2003 Unalloyed aluminium ingots for remelting—Classification and composition
ISO 119:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free phenols—Iodometric method
ISO 120:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method
ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings—Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced by ISO 16220]
ISO 123:2001 Rubber latex—Sampling
ISO 124:2014 Latex, rubber—Determination of total solids content
ISO 125:2011 Natural rubber latex concentrate—Determination of alkalinity
ISO 126:2005 Natural rubber latex concentrate—Determination of dry rubber content
ISO 127:2012 Rubber, natural latex concentrate—Determination of KOH number
ISO 128 Technical product documentation (TPD)—General principles of presentation^{[Note 3]}
ISO 129 Technical product documentation (TPD)—Indication of dimensions and tolerances^{[Note 3]}
- ISO 129-1:2004 Part 1: General principles
- ISO 129-4:2013 Part 4: Dimensioning of shipbuilding drawings
ISO 131:1979 Acoustics—Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement]
ISO 132:2017 Rubber, vulcanized or thermoplastic—Determination of flex cracking and crack growth (De Mattia)
ISO 133:1983 Rubber, vulcanized—Determination of crack growth (De Mattia) [Withdrawn: Replaced with ISO 132]
ISO 136:1972 Steel—Simple torsion testing of wire [Withdrawn replaced by ISO 7800]
ISO 137:2015 Wool—Determination of fibre diameter—Projection microscope method
ISO 139:2005 Textiles—Standard atmospheres for conditioning and testing
ISO 140 Acoustics—Measurement of sound insulation in buildings and of building elements
- ISO 140-2:1991 Part 2: Determination, verification and application of precision data [Withdrawn: replaced by ISO 12999-1:2014]
- ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms [Withdrawn: replaced by ISO 16283-1:2014]
- ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades [Withdrawn: replaced by ISO 16283-1:2014]
- ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors [Withdrawn: replaced by ISO 16283-1:2014]
- ISO 140-14:2004 Part 14: Guidelines for special situations in the field [Withdrawn: replaced by ISO 16283-1:2014]
  - ISO 140-14:2004/Cor 1:2007
- ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements [Withdrawn: replaced by ISO 10140-1:2016]
ISO 141:1976 Textile machinery and accessories—Pirn winders and cross winders—Definition of left and right sides
ISO 142:1976 Textile machinery and accessories—Weaving preparatory machines—Definition of left and right sides
ISO 143:1977 Textile machinery and accessories—Weft pirns for automatic looms [Withdrawn without replacement]
ISO 144:1973 Steel—Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
ISO 146:1984 Metallic materials—Hardness test—Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn replaced with ISO 6507-2]
- ISO 146-2:1993 Metallic materials—Verification of Vickers hardness testing machines—Part 2: Less than HV 0,2 [Withdrawn replaced with ISO 6507-2]
ISO 148 Metallic materials—Charpy pendulum impact test
- ISO 148-1:2016 Part 1: Test method
- ISO 148-2:2016 Part 2: Verification of testing machines
- ISO 148-3:2016 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes—Specifications and methods of test
ISO 155:1998 Belt drives—Pulleys—Limiting values for adjustment of centres
ISO 156:1982 Metallic materials—Hardness test—Verification of Brinell hardness testing machines [Withdrawn replaced by ISO 6506-2]
ISO 157:1996 Coal—Determination of forms of sulfur
ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement]
ISO 161 Thermoplastics pipes for the conveyance of fluids—Nominal outside diameters and nominal pressures
- ISO 161-1:1996 Part 1: Metric series
- ISO 161-2:1996 Part 2: Inch-based series
ISO 162:1985 Cinematography—Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture—Positions and width dimensions
ISO 171:1980 Plastics—Determination of bulk factor of moulding materials
ISO 172:1978 Plastics—Phenol-formaldehyde mouldings—Detection of free ammonia
ISO 174:1974 Plastics—Homopolymer and copolymer resins of vinyl chloride—Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-2]
ISO 175:2010 Plastics—Methods of test for the determination of the effects of immersion in liquid chemicals
ISO 176:2005 Plastics—Determination of loss of plasticizers—Activated carbon method
ISO 177:2016 Plastics—Determination of migration of plasticizers
ISO 178:2010 Plastics—Determination of flexural properties
ISO 179 Plastics—Determination of Charpy impact properties
- ISO 179-1:2010 Part 1: Non-instrumented impact test
- ISO 179-2:1997 Part 2: Instrumented impact test
ISO 180:2000 Plastics—Determination of Izod impact strength
ISO 182 Plastics—Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures
- ISO 182-1:1990 Part 1: Congo red method
- ISO 182-2:1990 Part 2: pH method
- ISO 182-3:1993 Part 3: Conductometric method
- ISO 182-4:1993 Part 4: Potentiometric method
ISO 185:2005 Grey cast irons - Classification
ISO 186:2002 Paper and board - Sampling to determine average quality
ISO 187:1990 Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
ISO 188:2011 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 196:1978 Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test
ISO 197 Copper and copper alloys - Terms and definitions
- ISO 197-1:1983 Part 1: Materials
- ISO 197-2:1983 Part 2: Unwrought products (Refinery shapes)
- ISO 197-3:1983 Part 3: Wrought products
- ISO 197-4:1983 Part 4: Castings
- ISO 197-5:1980 Part 5: Methods of processing and treatment
ISO 199:2014 Rolling bearings - Thrust bearings - Geometrical product specification (GPS) and tolerance values

ISO 200 – ISO 999

ISO 204:2009 Metallic materials - Uniaxial creep testing in tension - Method of test
ISO 209:2007 Aluminium and aluminium alloys - Chemical composition
ISO/TS 211:2014 Essential oils - General rules for labelling and marking of containers
ISO 212:2007 Essential oils - Sampling
ISO 214:1976 Documentation - Abstracts for publications and documentation
ISO 215:1986 Documentation - Presentation of contributions to periodicals and other serials
ISO 216:2007 Writing paper and certain classes of printed matter – Trimmed sizes – A and B series, and indication of machine direction
ISO 217:2013 Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction
ISO 225:2010 Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions
ISO 226:2003 Acoustics – Normal equal-loudness-level contours
ISO 228 Pipe threads where pressure-tight joints are not made on the threads
ISO 229:1973 Machine tools - Speeds and feeds
ISO 230 Test code for machine tools
- ISO 230-1:2012 Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
- ISO 230-2:2014 Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
- ISO 230-3:2007 Part 3: Determination of thermal effects
- ISO 230-4:2005 Part 4: Circular tests for numerically controlled machine tools
- ISO 230-5:2000 Part 5: Determination of the noise emission
- ISO 230-6:2002 Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
- ISO 230-7:2015 Part 7: Geometric accuracy of axes of rotation
- ISO/TR 230-8:2010 Part 8: Vibrations
- ISO/TR 230-9:2005 Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
- ISO 230-10:2016 Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
ISO 233 Information and documentation – Transliteration of Arabic characters into Latin characters^{[Note 3]}
ISO 234 Files and rasps
- ISO 234-1:1983 Part 1: Dimensions
- ISO 234-2:1982 Part 2: Characteristics of cut
ISO 235:2016 Parallel shank jobber and stub series drills and Morse taper shank drills
ISO 236 Reamers^{[Note 3]}
- ISO 236-1:1976 Hand reamers
- ISO 236-2:2013 Part 2: Long fluted machine reamers with Morse taper shanks
ISO 237:1975 Rotating tools with parallel shanks - Diameters of shanks and sizes of driving squares
ISO 238:2016 Reduction sleeves and extension sockets for tools with Morse taper shanks
ISO 239:1999 Drill chuck tapers
ISO 240:2016 Milling cutters - Interchangeability dimensions for cutter arbors or cutter mandrels
ISO 241:1994 Shanks for turning and planing tools - Shapes and dimensions of the section
ISO 242:2014 Carbide tips for brazing on turning tools
ISO 243:2014 Turning tools with carbide tips - External tools
ISO 244:1979 Aircraft - Sealing wire
ISO 245:1998 Aerospace - Lockwire - Diameters
ISO 246:2007 Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions
ISO 247:2006 Rubber - Determination of ash
ISO 248 Rubber, raw - Determination of volatile-matter content
- ISO 248-1:2011 Part 1: Hot-mill method and oven method
- ISO 248-2:2012 Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
ISO 249:2016 Rubber, raw natural - Determination of dirt content
ISO 251:2012 Conveyor belts with textile carcass - Widths and lengths
ISO 252:2007 Conveyor belts - Adhesion between constitutive elements - Test methods
ISO 254:2011 Belt drives - Pulleys - Quality, finish and balance
ISO 255:1990 Belt drives - Pulleys for V-belts (system based on datum width) - Geometrical inspection of grooves
ISO 257:2004 Pesticides and other agrochemicals - Principles for the selection of common names
ISO 259 Information and documentation – Transliteration of Hebrew characters into Latin characters^{[Note 3]}
ISO 261:1998 ISO general purpose metric screw threads – General plan
ISO 262:1998 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts
ISO 263:1973 ISO inch screw threads - General plan and selection for screws, bolts and nuts - Diameter range 0,06 to 6 in
ISO 265 Pipes and fittings of plastics materials - Fittings for domestic and industrial waste pipes - Basic dimensions: Metric series
- ISO 265-1:1988 Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
ISO 266:1997 Acoustics - Preferred frequencies
ISO 268:1980 Aircraft - Mechanical and electromechanical indicators - General requirements
ISO 269:1985 Correspondence envelopes - Designation and sizes [Withdrawn without replacement]
ISO 272:1982 Fasteners - Hexagon products - Widths across flats
ISO 273:1979 Fasteners - Clearance holes for bolts and screws
ISO 276:2002 Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test
ISO 277:2002 Binders for paints and varnishes - Raw tung oil - Requirements and methods of test
ISO 279:1998 Essential oils - Determination of relative density at 20 degrees C - Reference method
ISO 280:1998 Essential oils - Determination of refractive index
ISO 281:2007 Rolling bearings - Dynamic load ratings and rating life
ISO 282:1992 Conveyor belts - Sampling
ISO 283:2015 Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
ISO 284:2012 Conveyor belts - Electrical conductivity - Specification and test method
ISO 286 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes
- ISO 286-1:2010 Part 1: Basis of tolerances, deviations and fits
- ISO 286-2:2010 Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
ISO 287:2009 Paper and board - Determination of moisture content of a lot - Oven-drying method
ISO 289 Rubber, unvulcanized - Determinations using a shearing-disc viscometer
- ISO 289-1:2015 Part 1: Determination of Mooney viscosity
- ISO 289-2:2016 Part 2: Determination of pre-vulcanization characteristics
- ISO 289-3:2015 Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
- ISO 289-4:2003 Part 4: Determination of the Mooney stress-relaxation rate
ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing
ISO 293:2004 Plastics - Compression moulding of test specimens of thermoplastic materials
ISO 294 Plastics - Injection moulding of test specimens of thermoplastic materials
- ISO 294-1:2017 Part 1: General principles, and moulding of multipurpose and bar test specimens
- ISO 294-2:1996 Part 2: Small tensile bars
- ISO 294-3:2002 Part 3: Small plates
- ISO 294-4:2001 Part 4: Determination of moulding shrinkage
- ISO 294-5:2011 Part 5: Preparation of standard specimens for investigating anisotropy
ISO 295:2004 Plastics - Compression moulding of test specimens of thermosetting materials
ISO 296:1991 Machine tools - Self-holding tapers for tool shanks
ISO 297:1988 7/24 tapers for tool shanks for manual changing
ISO 298:1973 Machine tools - Lathe centres - Sizes for interchangeability
ISO 299:1987 Machine tool tables - T-slots and corresponding bolts
ISO 302:2015 Pulps - Determination of Kappa number
ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
ISO 361:1975 Basic ionizing radiation symbol
ISO 362 Measurement of noise emitted by accelerating road vehicles – Engineering method
- ISO 362-1:2015 Part 1: M and N categories
- ISO 362-2:2009 Part 2: L category
- ISO 362-3:2016 Part 3: Indoor testing M and N categories
ISO 369:2009 Machine tools - Symbols for indications appearing on machine tools
ISO 374 Protective gloves against dangerous chemicals and micro-organisms
- ISO 374-1:2016 Part 1: Terminology and performance requirements for chemical risks
- ISO 374-5:2016 Part 5: Terminology and performance requirements for micro-organisms risks
ISO 384:2015 Laboratory glass and plastics ware – Principles of design and construction of volumetric instruments
ISO 385:2005 Laboratory glassware – Burettes
ISO 386:1977 Liquid-in-glass laboratory thermometers – Principles of design, construction and use
ISO 387:1977 Hydrometers – Principles of construction and adjustment
ISO 407:2004 Small medical gas cylinders – Pin-index yoke-type valve connections
ISO 428:1983 Wrought copper-aluminium alloys - Chemical composition and forms of wrought products [Withdrawn without replacement]
ISO 445:2013 Pallets for materials handling – Vocabulary
ISO 463:2006 Geometrical Product Specifications (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges
ISO 472:2013 Plastics – Vocabulary
ISO 476:1982 Textile machinery and accessories – Pirn winding machines – Vocabulary
ISO 477:1982 Textile machinery and accessories – Cone and cheese winding machines – Vocabulary
ISO 497:1973 Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers
ISO 500 Agricultural tractors – Rear-mounted power take-off types 1, 2 and 3
ISO 518:2006 Photography – Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units – Specification
ISO 519:1992 Photography – Hand-held cameras – Flash-connector dimensions
ISO 532 Acoustics – Methods for calculating loudness
- ISO 532-1:2017 Part 1: Zwicker method
- ISO 532-2:2017 Part 2: Moore-Glasberg method
ISO 536:2012 Paper and board – Determination of grammage
ISO 561:1989 Coal preparation plant - Graphical symbols
ISO/TR 581:2005 Weldability - Metallic materials - General principles
ISO 611:2003 Road vehicles – Braking of automotive vehicles and their trailers – Vocabulary
ISO 612:1978 Road vehicles – Dimensions of motor vehicles and towed vehicles – Terms and definitions
ISO 633:2007 Cork – Vocabulary
ISO 639 Codes for the representation of names of languages
- ISO 639-1:2002 Part 1: Alpha-2 code
- ISO 639-2:1998 Part 2: Alpha-3 code
- ISO 639-3:2007 Part 3: Alpha-3 code for comprehensive coverage of languages
- ISO 639-4:2010 Part 4: General principles of coding of the representation of names of languages and related entities, and application guidelines
- ISO 639-5:2008 Part 5: Alpha-3 code for language families and groups
- ISO 639-6:2009 Part 6: Alpha-4 code for comprehensive coverage of language variants [Withdrawn, no replacement]
ISO/IEC 646:1991 Information technology – ISO 7-bit coded character set for information interchange
ISO 648:2008 Laboratory glassware – Single-volume pipettes
ISO 649 Laboratory glassware – Density hydrometers for general purposes
- ISO 649-1:1981 Part 1: Specification
- ISO 649-2:1981 Part 2: Test methods and use
ISO 650:1977 Relative density 60/60 degrees F hydrometers for general purposes
ISO 651:1975 Solid-stem calorimeter thermometers
ISO 652:1975 Enclosed-scale calorimeter thermometers
ISO 653:1980 Long solid-stem thermometers for precision use
ISO 654:1980 Short solid-stem thermometers for precision use
ISO 655:1980 Long enclosed-scale thermometers for precision use
ISO 656:1980 Short enclosed-scale thermometers for precision use
ISO 657 Hot-rolled steel sections
ISO 663:2017 Animal and vegetable fats and oils - Determination of insoluble impurities content
ISO 668 Series 1 freight containers – Classification, dimensions and ratings
ISO 676:1995 Spices and condiments – Botanical nomenclature
ISO 690:2010 Information and documentation – Guidelines for bibliographic references and citations to information resources
ISO 701:1998 International gear notation - Symbols for geometrical data
ISO 704:2009 Terminology work – Principles and methods
ISO 710 Graphical symbols for use on detailed maps, plans and geological cross-sections
- ISO 710-1:1974 Part 1: General rules of representation
- ISO 710-2:1974 Part 2: Representation of sedimentary rocks
- ISO 710-3:1974 Part 3: Representation of magmatic rocks
- ISO 710-4:1982 Part 4: Representation of metamorphic rocks
- ISO 710-5:1989 Part 5: Representation of minerals
- ISO 710-6:1984 Part 6: Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering
- ISO 710-7:1984 Part 7: Tectonic symbols
ISO 732 Photography – 120-size and 220-size films – Dimensions
ISO 748:2007 Hydrometry – Measurement of liquid flow in open channels using current-meters or floats
ISO 760:1978 Determination of water - Karl Fischer method (General method)
ISO 764 Horology – Magnetic resistant watches
ISO 772:2011 Hydrometry - Vocabulary and symbols
ISO 780:2015 Packaging - Distribution packaging - Graphical symbols for handling and storage of packages
ISO 787 General methods of test for pigments and extenders
- ISO 787-9:1981 Determination of pH value of an aqueous suspension
ISO 830:1999 Freight containers – Vocabulary
ISO 832:1994 Information and documentation - Bibliographic description and references - Rules for the abbreviation of bibliographic terms
ISO 835:2007 Laboratory glassware – Graduated pipettes
ISO 836:2001 Terminology for refractories
ISO 838:1974 Paper – Holes for general filing purposes – Specifications
ISO 843:1997 Information and documentation – Conversion of Greek characters into Latin characters
ISO 846:1997 Plastics – Evaluation of the action of microorganisms
ISO 857 Welding and allied processes - Vocabulary
- ISO 857-2:2005 Part 2: Soldering and brazing processes and related terms
ISO 860:2007 Terminology work – Harmonization of concepts and terms
ISO 862:1984 Surface active agents – Vocabulary
ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel^{[Note 3]}
ISO 928 Spices and condiments - Determination of total ash
ISO 936 Meat and meat products - Determination of total ash
ISO 962:1974 Information processing - Implementation of the 7- bit coded character set and its 7- bit and 8-bit extensions on 9- track 12,7 mm (0.5 in) magnetic tape
ISO 965 ISO general purpose metric screw threads – Tolerances
ISO 999:1996 Information and documentation – Guidelines for the content, organization, and presentation of indexes

ISO 1000 – ISO 4999

ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [withdrawn 2009-11-17]
ISO/IEC 1001:2012 Information technology – File structure and labelling of magnetic tapes for information interchange
ISO 1004 Information processing – Magnetic ink character recognition – Print specifications
- ISO 1004-1:2013 Part 1: Print specifications for E13B
- ISO 1004-2:2013 Part 2: Print specifications for CMC7
ISO 1007 Photography – 135-size film and magazine – Specifications
ISO 1031:1974 Coniferous sawn timber – Defects – Terms and definitions
ISO 1032:1974 Coniferous sawn timber – Sizes – Terms and definitions
ISO 1034:1973 Aircraft - Ground air-conditioning connections
ISO 1042:1998 Laboratory glassware – One-mark volumetric flasks
ISO 1069:1973 Magnetic compasses and binnacles for sea navigation – Vocabulary
ISO 1070:1992 Liquid flow measurement in open channels – Slope-area method
ISO 1073 Alphanumeric character sets for optical recognition
- ISO 1073-1:1976 Part 1: Character set OCR-A - Shapes and dimensions of the printed image
- ISO 1073-2:1976 Part 2: Character set OCR-B - Shapes and dimensions of the printed image
ISO 1081:2013 Belt drives - V-belts and V-ribbed belts, and corresponding grooved pulleys - Vocabulary
ISO 1086:1991 Information and documentation – Title leaves of books
ISO 1087 Terminology work - Vocabulary
- ISO 1087-1:2000 Part 1: Theory and application
ISO 1088:2007 Hydrometry – Velocity-area methods using current-meters – Collection and processing of data for determination of uncertainties in flow measurement
ISO 1101:2017 Geometrical product specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out
ISO 1100 Hydrometry – Measurement of liquid flow in open channels
- ISO 1100-2:2010 Part 2: Determination of the stage-discharge relationship
ISO 1107:2017 Fishing nets – Netting – Basic terms and definitions
ISO 1112:2009 Horology – Functional and non-functional jewels
ISO 1113:1979 Information processing - Representation of the 7- bit coded character set on punched tape
ISO 1119:2011 Geometrical product specifications (GPS) - Series of conical tapers and taper angles
ISO 1122 Vocabulary of gear terms
- ISO 1122-1:1998 Part 1: Definitions related to geometry
- ISO 1122-2:1999 Part 2: Definitions related to worm gear geometry
ISO 1132 Rolling bearings - Tolerances
- ISO 1132-1:2000 Part 1: Terms and definitions
ISO 1135 Transfusion equipment for medical use
- ISO 1135-3:2016 Part 3: Blood-taking sets for single use
- ISO 1135-4:2015 Part 4: Transfusion sets for single use, gravity feed
- ISO 1135-5:2015 Part 5: Transfusion sets for single use with pressure infusion apparatus
ISO 1146:1988 Pyrometric reference cones for laboratory use – Specification
ISO 1151 Flight dynamics - Concepts, quantities and symbols
- ISO 1151-1:1988 Part 1: Aircraft motion relative to the air
- ISO 1151-2:1985 Part 2: Motions of the aircraft and the atmosphere relative to the Earth
- ISO 1151-3:1989 Part 3: Derivatives of forces, moments and their coefficients
- ISO 1151-4:1994 Part 4: Concepts and quantities used in the study of aircraft stability and control
- ISO 1151-5:1987 Part 5: Quantities used in measurements
- ISO 1151-6:1982 Part 6: Aircraft geometry
- ISO 1151-7:1985 Part 7: Flight points and flight envelopes
- ISO 1151-8:1992 Part 8: Concepts and quantities used in the study of the dynamic behaviour of the aircraft
- ISO 1151-9:1993 Part 9: Models of atmospheric motions along the trajectory of the aircraft
ISO 1154:1975 Information processing – Punched paper tape – Dimensions and location of feed holes and code holes
ISO 1155:1978 Information processing – Use of longitudinal parity to detect errors in information messages
ISO 1176:1990 Road vehicles – Masses – Vocabulary and codes
ISO 1177:1985 Information processing – Character structure for start/stop and synchronous character oriented transmission
ISO 1182 Reaction to fire tests for products—Non-combustibility test
ISO 1213 Solid mineral fuels – Vocabulary
- ISO 1213-1:1993 Part 1: Terms relating to coal preparation
- ISO 1213-2:2016 Part 2: Terms relating to sampling, testing and analysis
ISO 1217 Displacement compressors—Acceptance tests
ISO 1219 Fluid power systems and components - Graphical symbols and circuit diagrams
- ISO 1219-1:2012 Part 1: Graphical symbols for conventional use and data-processing applications
- ISO 1219-2:2012 Part 2: Circuit diagrams
- ISO 1219-3:2016 Part 3: Symbol modules and connected symbols in circuit diagrams
ISO 1222 Photography – Tripod connections
ISO 1268 Fibre-reinforced plastics – Methods of producing test plates
ISO 1302:2002 Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation
ISO 1382:2012 Rubber – Vocabulary
ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
ISO 1413:2016 Horology - Shock-resistant wrist watches
ISO 1438:2017 Hydrometry – Open channel flow measurement using thin-plate weirs
ISO 1502:1996 ISO general-purpose metric screw threads – Gauges and gauging
ISO 1506:1982 Textile machinery – Dyeing, finishing and allied machinery – Classification and nomenclature
ISO 1531:1973 Fishing nets – Hanging of netting – Basic terms and definitions
ISO 1538:1984 Programming languages - ALGOL 60
ISO/IEC 1539 Information technology – Programming languages – Fortran
- ISO/IEC 1539-1:2010 Part 1: Base language
- ISO/IEC 1539-2:2000 Part 2: Varying length character strings
ISO 1586:1977 Textile machinery and accessories – Shuttles – Terms and designation in relation to the position of the shuttle eye
ISO 1629:2013 Rubber and latices – Nomenclature
ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
ISO 1663 Rigid cellular plastics – Determination of water vapour transmission properties
ISO 1680:2013 Acoustics – Test code for the measurement of airborne noise emitted by rotating electrical machines
ISO 1681:1973 Information processing – Unpunched paper cards – Specification
ISO 1683:2015 Acoustics - Preferred reference values for acoustical and vibratory levels
ISO 1703:2005 Assembly tools for screws and nuts - Designation and nomenclature
ISO 1730:1980 Dictation equipment – Basic operating requirements
ISO 1745:1975 Information processing – Basic mode control procedures for data communication systems
ISO 1750 Pesticides and other agrochemicals – Common names
ISO 1768:1975 Glass hydrometers – Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids)
ISO 1769:1975 Laboratory glassware – Pipettes – Colour coding
ISO 1770:1981 Solid-stem general purpose thermometers
ISO 1771:1981 Enclosed-scale general purpose thermometers
ISO 1791:1983 Building construction – Modular co-ordination – Vocabulary
ISO 1803:1997 Building construction – Tolerances – Expression of dimensional accuracy – Principles and terminology
ISO 1804:1972 Doors – Terminology
ISO 1809:1977 Textile machinery and accessories – Types of formers for yarn packages – Nomenclature
ISO 1828:2012 Health informatics – Categorial structure for terminological systems of surgical procedures
ISO 1837:2003 Lifting hooks – Nomenclature
ISO 1858:1977 Information processing – General purpose hubs and reels, with 76 mm (3 in) centrehole, for magnetic tape used in interchange instrumentation applications
ISO 1859:1973 Information processing – Unrecorded magnetic tapes for interchange instrumentation applications – General dimensional requirements
ISO 1860:1986 Information processing – Precision reels for magnetic tape used in interchange instrumentation applications
ISO 1861:1975 Information processing – 7- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 8 rpmm (200 rpi)
ISO 1862:1975 Information processing – 9- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 8 rpmm (200 rpi)
ISO/IEC 1863:1990 Information processing – 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using NRZ1 at 32 ftpmm (800 ftpi) – 32 cpmm (800 cpi)
ISO/IEC 1864:1992 Information technology – Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange – 32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi), NRZ1
ISO 1891:2009 Fasteners - Terminology
- ISO 1891-2:2014 Part 2: Vocabulary and definitions for coatings
ISO 1928 Solid mineral fuels – Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
ISO 1938 Geometrical product specifications (GPS) – Dimensional measuring equipment
- ISO 1938-1:2015 Part 1: Plain limit gauges of linear size
- ISO 1938-2:2017 Part 2: Reference disk gauges
ISO 1942:2009 Dentistry - Vocabulary
ISO 1951:2007 Presentation/representation of entries in dictionaries - Requirements, recommendations and information
ISO 1956 Fruits and vegetables – Morphological and structural terminology
- ISO 1956-1:1982 (No part title)
- ISO 1956-2:1989 (No part title)
ISO 1964:1987 Shipbuilding - Indication of details on the general arrangement plans of ships
ISO 1968:2004 Fibre ropes and cordage – Vocabulary
ISO/IEC 1989:2014 Information technology - Programming languages, their environments and system software interfaces - Programming language COBOL
ISO 1990 Fruits – Nomenclature
- ISO 1990-1:1982 First list
- ISO 1990-2:1985 Second list
ISO 1991 Vegetables – Nomenclature
- ISO 1991-1:1982 First list
- ISO 1991-2:1995 Part 2: Second list
ISO 1996 Acoustics – Description, measurement and assessment of environmental noise
- ISO 1996-2:2017 Part 2: Determination of sound pressure levels
ISO 1998 Petroleum industry – Terminology
- ISO 1998-1:1998 Part 1: Raw materials and products
- ISO 1998-2:1998 Part 2: Properties and tests
- ISO 1998-3:1998 Part 3: Exploration and production
- ISO 1998-4:1998 Part 4: Refining
- ISO 1998-5:1998 Part 5: Transport, storage, distribution
- ISO 1998-6:2000 Part 6: Measurement
- ISO 1998-7:1998 Part 7: Miscellaneous terms
- ISO 1998-99:2000 Part 99: General and index
ISO 2014:1976 Writing of calendar dates in all-numeric form [Withdrawn: replaced by ISO 8601:1988]
ISO 2015:1976 Numbering of weeks [Withdrawn: replaced by ISO 8601:1988]
ISO 2017 Mechanical vibration and shock – Resilient mounting systems
- ISO 2017-1:2005 Part 1: Technical information to be exchanged for the application of isolation systems
- ISO 2017-2:2007 Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
- ISO 2017-3:2015 Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
ISO/IEC 2022:1994 Information technology – Character code structure and extension techniques
ISO 2033:1983 Information processing - Coding of machine readable characters (MICR and OCR)
ISO 2041:2009 Mechanical vibration, shock and condition monitoring - Vocabulary
ISO 2047:1975 Information processing - Graphical representations for the control characters of the 7- bit coded character set
ISO 2074:2007 Plywood – Vocabulary
ISO 2076:2013 Textiles – Man-made fibres – Generic names
ISO 2080:2008 Metallic and other inorganic coatings - Surface treatment, metallic and other inorganic coatings - Vocabulary
ISO 2108:2005 Information and documentation – International standard book number (ISBN)
ISO 2110:1989 Information technology – Data communication – 25-pole DTE/DCE interface connector and contact number assignments
ISO 2145:1978 Documentation – Numbering of divisions and subdivisions in written documents
ISO 2146:2010 Information and documentation - Registry services for libraries and related organizations
ISO 2148:1974 Continuous handling equipment – Nomenclature
ISO 2151:2004 Acoustics – Noise test code for compressors and vacuum pumps – Engineering method (Grade 2)
ISO 2162 Technical product documentation – Springs
- ISO 2162-1:1993 Part 1: Simplified representation
- ISO 2162-2:1993 Part 2: Presentation of data for cylindrical helical compression springs
ISO 2171 Cereals, pulses and by-products – Determination of ash yield by incineration
ISO 2186:2007 Fluid flow in closed conduits – Connections for pressure signal transmissions between primary and secondary elements
ISO 2187:1990 Spinning preparatory machinery, spinning and doubling (twisting) machinery – List of equivalent terms
ISO 2203:1973 Technical drawings – Conventional representation of gears
ISO 2205:1975 Textile machinery and accessories – Drafting arrangements for spinning machines – Terminology
ISO 2240:2003 Photography – Colour reversal camera films – Determination of ISO speed
ISO 2257:1980 Office machines and printing machines used for information processing – Widths of fabric printing ribbons on spools
ISO 2258:1976 Printing ribbons – Minimum markings to appear on containers
ISO 2281:1990 Horology - Water-resistant watches [Withdrawn: replaced by ISO 22810:2010]
ISO 2300:1973 Sawn timber of broadleaved species – Defects – Terms and definitions
ISO 2331:1974 Fork lift trucks – Hook-on type fork arms – Vocabulary
ISO/IEC 2375:2003 Information technology - Procedure for registration of escape sequences and coded character sets
ISO/IEC 2382:2015 Information technology - Vocabulary
- ISO/IEC 2382-36:2013 Part 36: Learning, education and training
- ISO/IEC 2382-37:2017 Part 37: Biometrics
ISO 2384:1977 Documentation – Presentation of translations
ISO 2395:1990 Test sieves and test sieving - Vocabulary
ISO 2425:2010 Hydrometry – Measurement of liquid flow in open channels under tidal conditions
ISO 2444:1988 Joints in building – Vocabulary
ISO 2532:1974 Steel wire ropes - Vocabulary
ISO 2533:1975 Standard Atmosphere
ISO 2537:2007 Hydrometry – Rotating-element current-meters
ISO 2538 Geometrical product specifications (GPS) - Wedges
- ISO 2538-1:2014 Part 1: Series of angles and slopes
- ISO 2538-2:2014 Part 2: Dimensioning and tolerancing
ISO 2553:2013 Welding and allied processes – Symbolic representation on drawings – Welded joints
ISO 2574:1994 Aircraft – Electrical cables – Identification marking
ISO 2575:2010 Road vehicles - Symbols for controls, indicators and tell-tales
ISO/IEC 2593:2000 Information technology – Telecommunications and information exchange between systems – 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments
ISO 2602:1980 Statistical interpretation of test results - Estimation of the mean - Confidence interval
ISO 2628:1973 Basic mode control procedures – Complements
ISO 2629:1973 Basic mode control procedures – Conversational information message transfer
ISO 2669:1995 Environmental tests for aircraft equipment - Steady-state acceleration
ISO 2671:1982 Environmental tests for aircraft equipment - Part 3.4 : Acoustic vibration
ISO 2685:1998 Aircraft - Environmental test procedure for airborne equipment - Resistance to fire in designated fire zones
ISO 2692:2014 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
ISO 2709:2008 Information and documentation – Format for information exchange
ISO 2710 Reciprocating internal combustion engines - Vocabulary
- ISO 2710-1:2000 Part 1: Terms for engine design and operation
- ISO 2710-2:1999 Part 2: Terms for engine maintenance
ISO 2711:1973 Information processing interchange - Representation of ordinal dates [Withdrawn: replaced by ISO 8601:1988]
ISO 2768 General tolerances
- ISO 2768-1:1989 Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
- ISO 2768-2:1989 Part 2: Geometrical tolerances for features without individual tolerance indications
ISO 2775:1977 Office machines and printing machines used for information processing – Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons
ISO 2784:1974 Continuous forms used for information processing - Sizes and sprocket feed holes
ISO 2788:1986 Documentation - Guidelines for the establishment and development of monolingual thesauri [Withdrawn: replaced by ISO 25964-1:2011]
ISO 2789:2013 Information and documentation - International library statistics
ISO 2806:1994 Industrial automation systems - Numerical control of machines - Vocabulary
ISO 2822 Raw cattle hides and calf skins
- ISO 2822-1:1998 Part 1: Descriptions of defects
ISO 2848:1984 Building construction - Modular coordination - Principles and rules
ISO 2852 Stainless steel clamp pipe couplings for the food industry
ISO 2854:1976 Statistical interpretation of data - Techniques of estimation and tests relating to means and variances
ISO 2859 Sampling procedures for inspection by attributes
- ISO 2859-1:1999 Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- ISO 2859-2:1985 Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
- ISO 2859-3:2005 Part 3: Skip-lot sampling procedures
- ISO 2859-4:2002 Part 4: Procedures for assessment of declared quality levels
- ISO 2859-5:2005 Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- ISO 2859-10:2006 Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
ISO 2922:2000 Acoustics – Measurement of airborne sound emitted by vessels on inland waterways and harbours
ISO 2923:1996 Acoustics - Measurement of noise on board vessels
ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity
ISO 2972:1979 Numerical control of machines - Symbols
ISO 2975 Measurement of water flow in closed conduits – Tracer methods
- ISO 2975-1:1974 Part 1: General
- ISO 2975-2:1975 Part 2: Constant rate injection method using non-radioactive tracers
- ISO 2975-3:1976 Part 3: Constant rate injection method using radioactive tracers
- ISO 2975-6:1977 Part 6: Transit time method using non-radioactive tracers
- ISO 2975-7:1977 Part 7: Transit time method using radioactive tracers
ISO 3002 Basic quantities in cutting and grinding
- ISO 3002-1:1982 Part 1: Geometry of the active part of cutting tools – General terms, reference systems, tool and working angles, chip breakers
- ISO 3002-2:1982 Part 2: Geometry of the active part of cutting tools – General conversion formulae to relate tool and working angles
- ISO 3002-3:1984 Part 3: Geometric and kinematic quantities in cutting
- ISO 3002-4:1984 Part 4: Forces, energy, power
- ISO 3002-5:1989 Part 5: Basic terminology for grinding processes using grinding wheels
ISO 3029:1995 Photography - 126-size cartridges - Dimensions of cartridge, film and backing paper [Withdrawn without replacement]
ISO 3040:2016 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Cones
ISO 3046 Reciprocating internal combustion engines – Performance
- ISO 3046-5:2001 Part 5: Torsional vibrations
ISO 3082 Iron ores – Sampling and sample preparation procedures
ISO 3095:2013 Acoustics – Railway applications – Measurement of noise emitted by railbound vehicles
ISO 3098 Technical product documentation – Lettering
- ISO 3098-1:2015 Part 1: General requirements
- ISO 3098-2:2000 Part 2: Latin alphabet, numerals and marks
- ISO 3098-3:2000 Part 3: Greek alphabet
- ISO 3098-4:2000 Part 4: Diacritical and particular marks for the Latin alphabet
- ISO 3098-5:1997 Part 5: CAD lettering of the Latin alphabet, numerals and marks
- ISO 3098-6:2000 Part 6: Cyrillic alphabet
ISO 3103 Tea – Preparation of liquor for use in sensory tests
ISO 3105:1994 Glass capillary kinematic viscometers – Specifications and operating instructions
ISO 3166 Codes for the representation of names of countries and their subdivisions
- ISO 3166-1:2013 Part 1: Country codes
- ISO 3166-2:2013 Part 2: Country subdivision code
- ISO 3166-3:2013 Part 3: Code for formerly used names of countries
ISO 3252:1999 Powder metallurgy – Vocabulary
ISO 3272 Microfilming of technical drawings and other drawing office documents
- ISO 3272-1:2003 Part 1: Operating procedures
- ISO 3272-2:1994 Part 2: Quality criteria and control of 35 mm silver gelatin microfilms
- ISO 3272-3:2001 Part 3: Aperture card for 35 mm microfilm
- ISO 3272-4:1994 Part 4: Microfilming of drawings of special and exceptional elongated sizes
- ISO 3272-6:2000 Part 6: Quality criteria and control of systems for enlargements from 35 mm microfilm
ISO 3274:1996 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Nominal characteristics of contact (stylus) instruments
ISO 3275:1974 Information processing - Implementation of the 7- bit coded character set and its 7- bit and 8- bit extensions on 3,81 mm magnetic cassette for data interchange
ISO 3287:1999 Powered industrial trucks - Symbols for operator controls and other displays
ISO 3297:2007 Information and documentation – International standard serial number (ISSN)
ISO 3301:1975 Statistical interpretation of data - Comparison of two means in the case of paired observations
ISO 3307:1975 Information interchange - Representations of time of the day [Withdrawn: replaced by ISO 8601:1988]
ISO 3354:2008 Measurement of clean water flow in closed conduits – Velocity-area method using current-meters in full conduits and under regular flow conditions
ISO 3381:2005 Railway applications – Acoustics – Measurement of noise inside railbound vehicles
ISO 3394:2012 Packaging - Complete, filled transport packages and unit loads - Dimensions of rigid rectangular packages
ISO 3407:1983 Information processing – Information interchange on 3,81 mm (0.150 in) magnetic tape cassette at 4 cpmm (100 cpi), phase encoded at 63 ftpmm (1 600 ftpi)
ISO 3408 Ball screws
- ISO 3408-1:2006 Part 1: Vocabulary and designation
ISO 3454:2008 Hydrometry – Direct depth sounding and suspension equipment
ISO 3455:2007 Hydrometry – Calibration of current-meters in straight open tanks
ISO 3493:2014 Vanilla – Vocabulary
ISO 3494:1976 Statistical interpretation of data - Power of tests relating to means and variances
ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
ISO 3507:1999 Laboratory glassware – Pyknometers
ISO 3509:2005 Coffee and coffee products – Vocabulary
ISO 3511 Industrial process measurement control functions and instrumentation - Symbolic representation^{[Note 3]}
- ISO 3511-1:1977 Part 1: Basic requirements
- ISO 3511-2:1984 Part 2: Extension of basic requirements
- ISO 3511-3:1984 Part 3: Detailed symbols for instrument interconnection diagrams
- ISO 3511-4:1985 Part 4: Basic symbols for process computer, interface, and shared display/control functions
ISO 3529 Vacuum technology - Vocabulary
- ISO 3529-1:1981 Part 1: General terms
- ISO 3529-2:1981 Part 2: Vacuum pumps and related terms
- ISO 3529-3:2014 Part 3: Total and partial pressure vacuum gauges
ISO 3534 Statistics – Vocabulary and symbols
- ISO 3534-1:2006 Part 1: General statistical terms and terms used in probability
- ISO 3534-2:2006 Part 2: Applied statistics
- ISO 3534-3:2013 Part 3: Design of experiments
- ISO 3534-4:2014 Part 4: Survey sampling
ISO 3535:1977 Forms design sheet and layout chart
ISO 3536:2016 Road vehicles – Safety glazing materials – Vocabulary
ISO 3537 Road vehicles – Safety glazing materials – Mechanical tests
ISO 3538 Road vehicles – Safety glazing materials – Test methods for optical properties
ISO 3540:1976 Paper or plastic printing ribbons – Characteristics of cores
ISO 3561:1976 Information processing – Interchangeable magnetic six-disk pack – Track format
ISO 3562:1976 Information processing – Interchangeable magnetic single-disk cartridge (top loaded) – Physical and magnetic characteristics
ISO 3563:1976 Information processing – Interchangeable magnetic single-disk cartridge (top loaded) – Track format
ISO 3564:1976 Information processing – Interchangeable magnetic eleven-disk pack – Physical and magnetic characteristics
ISO 3572:1976 Textiles – Weaves – Definitions of general terms and basic weaves
ISO 3591 Sensory analysis – Apparatus – Wine-tasting glass
ISO 3593 Starch — Determination of ash
ISO 3601 Fluid power systems – O-rings
- ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes
- ISO 3601-2 Housing dimensions for general applications
- ISO 3601-3 Quality acceptance criteria
- ISO 3601-4 Anti-extrusion rings (back-up rings)
- ISO 3601-5 Suitability of elastomeric materials for industrial applications
ISO 3602:1989 Documentation – Romanization of Japanese (kana script)
ISO 3611:2010 Geometrical product specifications (GPS) – Dimensional measuring equipment: Micrometers for external measurements – Design and metrological characteristics
ISO 3632 Spices – Saffron (Crocus sativus L.)^{[Note 3]}
ISO 3635:1981 Size designation of clothes – Definitions and body measurement procedure
ISO 3650:1998 Geometrical Product Specifications (GPS) – Length standards – Gauge blocks
ISO 3660:1976 Fishing nets – Mounting and joining of netting – Terms and illustrations
ISO/TR 3666:1998 Viscosity of water
ISO 3676:2012 Packaging - Complete, filled transport packages and unit loads - Unit load dimensions
ISO 3690 Welding and allied processes — Determination of hydrogen content in arc weld metal
ISO 3692:1976 Information processing – Reels and cores for 25,4 mm (1 in) perforated paper tape for information interchange – Dimensions
ISO 3713:1987 Ferroalloys - Sampling and preparation of samples - General rules
ISO 3715 Ships and marine technology – Propulsion plants for ships
- ISO 3715-1:2002 Part 1: Vocabulary for geometry of propellers
- ISO 3715-2:2001 Part 2: Vocabulary for controllable-pitch propeller plants
ISO/TS 3716:2006 Hydrometry – Functional requirements and characteristics of suspended-sediment samplers
ISO 3740:2000 Acoustics – Determination of sound power levels of noise sources – Guidelines for the use of basic standards
ISO 3741:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for reverberation test rooms
ISO 3743 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for small movable sources in reverberant fields^{[Note 3]}
- ISO 3743-1:2010 Part 1: Comparison method for a hard-walled test room
- ISO 3743-2:1994 Part 2: Methods for special reverberation test rooms
ISO 3744:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for an essentially free field over a reflecting plane
ISO 3745:2012 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for anechoic rooms and hemi-anechoic rooms
ISO 3746:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Survey method using an enveloping measurement surface over a reflecting plane
ISO 3747:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering/survey methods for use in situ in a reverberant environment
ISO 3766:2003 Construction drawings – Simplified representation of concrete reinforcement
ISO 3767 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays
- ISO 3767-1:2016 Part 1: Common symbols
- ISO 3767-2:2016 Part 2: Symbols for agricultural tractors and machinery
- ISO 3767-3:2016 Part 3: Symbols for powered lawn and garden equipment
- ISO 3767-4:2016 Part 4: Symbols for forestry machinery
- ISO 3767-5:2016 Part 5: Symbols for manual portable forestry machines
ISO/IEC 3788:1990 Information processing – 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using phase encoding at 126 ftpmm (3 200 ftpi), 63 cpmm (1 600 cpi)
ISO 3791:1976 Office machines and data processing equipment - Keyboard layouts for numeric applications
ISO 3792:1976 Adding machines - Layout of function keyboard
ISO 3802:1976 Information processing – General purpose reels with 8 mm (5/16 in) centre hole for magnetic tape for interchange instrumentation applications
ISO 3819:2015 Laboratory glassware – Beakers
ISO 3822 Acoustics – Laboratory tests on noise emission from appliances and equipment used in water supply installations
- ISO 3822-1:1999 Part 1: Method of measurement
- ISO 3822-2:1995 Part 2: Mounting and operating conditions for draw-off taps and mixing valves
- ISO 3822-3:1997 Part 3: Mounting and operating conditions for in-line valves and appliances
- ISO 3822-4:1997 Part 4: Mounting and operating conditions for special appliances
ISO 3826 Plastics collapsible containers for human blood and blood components
- ISO 3826-1:2013 Part 1: Conventional containers
- ISO 3826-2:2008 Part 2: Graphical symbols for use on labels and instruction leaflets
- ISO 3826-3:2006 Part 3: Blood bag systems with integrated features
- ISO 3826-4:2015 Part 4: Aphaeresis blood bag systems with integrated features
ISO 3828:2008 Shipbuilding and marine structures – Deck machinery – Vocabulary and symbols
ISO 3833:1977 Road vehicles – Types – Terms and definitions
ISO 3835 Equipment for vine cultivation and wine making – Vocabulary
- ISO 3835-1:1976 (No part title)
- ISO 3835-3:1980 (No part title)
- ISO 3835-4:1981 (No part title)
ISO 3846:2008 Hydrometry – Open channel flow measurement using rectangular broad-crested weirs
ISO 3847:1977 Liquid flow measurement in open channels by weirs and flumes – End-depth method for estimation of flow in rectangular channels with a free overfall
ISO 3855:1977 Milling cutters - Nomenclature
ISO 3857 Compressors, pneumatic tools and machines - Vocabulary
- ISO 3857-1:1977 Part 1: General
- ISO 3857-2:1977 Part 2: Compressors
- ISO 3857-3:1989 Part 3: Pneumatic tools and machines
- ISO 3857-4:2012 Part 4: Air treatment
ISO 3861:2005 Rubber hoses for sand and grit blasting - Specification
ISO 3864 Graphical symbols – Safety colours and safety signs
ISO 3866:1977 Office machines and printing machines used for information processing – Widths of fabric printing ribbons on spools exceeding 19 mm
ISO 3877 Tyres, valves and tubes – List of equivalent terms
- ISO 3877-1:1997 Part 1: Tyres
- ISO 3877-2:1997 Part 2: Tyre valves
- ISO 3877-3:1978 Part 3: Tubes
- ISO 3877-4:1984 Part 4: Solid tyres
ISO 3880 Building construction – Stairs – Vocabulary
- ISO 3880-1:1977
ISO 3883:1977 Office machines – Line and character capacity of address masters
ISO 3901:2001 Information and documentation – International Standard Recording Code (ISRC)
ISO 3911:2004 Wheels and rims for pneumatic tyres – Vocabulary, designation and marking
ISO 3918:2007 Milking machine installations – Vocabulary
ISO 3950:2016 Dentistry - Designation system for teeth and areas of the oral cavity
ISO 3951 Sampling procedures for inspection by variables
- ISO 3951-1:2013 Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
- ISO 3951-2:2013 Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
- ISO 3951-3:2007 Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- ISO 3951-4:2011 Part 4: Procedures for assessment of declared quality levels
- ISO 3951-5:2006 Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
ISO 3952 Kinematic diagrams - Graphical symbols
- ISO 3952-1:1981 (Motion of links of mechanisms; Kinematic pairs; Links and connections of their components; Linkage of bars and their links)
- ISO 3952-2:1981 (Friction and gear mechanisms; Cam mechanisms)
- ISO 3952-3:1979 (Maltese and ratchet mechanisms; Couplings and brakes)
- ISO 3952-4:1984 (Miscellaneous mechanisms and their components)
ISO 3966:2008 Measurement of fluid flow in closed conduits – Velocity area method using Pitot static tubes
ISO 3977 Gas turbines – Procurement
ISO 4006:1991 Measurement of fluid flow in closed conduits - Vocabulary and symbols
ISO 4007:2012 Personal protective equipment - Eye and face protection - Vocabulary
ISO 4031:1978 Information interchange - Representation of local time differentials [Withdrawn: replaced by ISO 8601:1988]
ISO 4037 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy
- ISO 4037-1:1996 Part 1: Radiation characteristics and production
- ISO 4037-2:1997 Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV
- ISO 4037-3:1999 Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence
- ISO 4037-4:2004 Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields
ISO 4046 Paper, board, pulps and related terms – Vocabulary
- ISO 4046-1:2016 Part 1: Alphabetical index
- ISO 4046-2:2016 Part 2: Pulping terminology
- ISO 4046-3:2016 Part 3: Paper-making terminology
- ISO 4046-4:2016 Part 4: Paper and board grades and converted products
- ISO 4046-5:2016 Part 5: Properties of pulp, paper and board
ISO 4057:1986 Information processing – Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1 600 bpi) phase-encoded
ISO 4063:2009 Welding and allied processes - Nomenclature of processes and reference numbers
ISO 4074 Natural latex rubber condoms – Requirements and test methods
ISO 4087:2005 Micrographics - Microfilming of newspapers for archival purposes on 35 mm microfilm
ISO 4125:1991 Dry fruits and dried fruits – Definitions and nomenclature
ISO 4129:2012 Road vehicles - Mopeds - Symbols for controls, indicators and tell-tales
ISO 4130:1978 Road vehicles – Three-dimensional reference system and fiducial marks – Definitions
ISO 4135:2001 Anaesthetic and respiratory equipment - Vocabulary
ISO 4139:1979 Ferrosilicon - Determination of aluminium content - Flame atomic absorption spectrometric method
ISO 4140:1979 Ferrochromium and ferrosilicochromium - Determination of chromium content - Potentiometric method
ISO 4157 Construction drawings – Designation systems
ISO 4158:1978 Ferrosilicon, ferrosilicomanganese and ferrosilicochromium - Determination of silicon content - Gravimetric method
ISO 4159:1978 Ferromanganese and ferrosilicomanganese - Determination of manganese content - Potentiometric method
ISO 4165 Road vehicles — Electrical connections — Double-pole connection
ISO 4172:1991 Technical drawings – Construction drawings – Drawings for the assembly of prefabricated structures
ISO 4173:1980 Ferromolybdenum - Determination of molybdenum content - Gravimetric method
ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining
ISO 4185:1980 Measurement of liquid flow in closed conduits – Weighing method
ISO 4217:2015 Codes for the representation of currencies
ISO 4223 Definitions of some terms used in the tyre industry
- ISO 4223-1:2017 Part 1: Pneumatic tyres
- ISO 4223-2:1991 Part 2: Solid tyres
ISO 4225:1994 Air quality - General aspects - Vocabulary
ISO 4226:2007 Air quality – General aspects – Units of measurement
ISO 4232 Office machines – Minimum information to be included in specification sheets
- ISO 4232-3:1984 Part 3: Postal franking machines
ISO 4246:1994 Cinematography - Vocabulary
ISO 4248:1978 Jig bushes - Definitions and nomenclature
ISO 4287:1997 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters
ISO 4288:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture
ISO 4291:1985 Methods for the assessement of departure from roundness - Measurement of variations in radius
ISO 4306 Cranes – Vocabulary
- ISO 4306-1:2007 Part 1: General
- ISO 4306-2:2012 Part 2: Mobile cranes
- ISO 4306-3:2016 Part 3: Tower cranes
- ISO 4306-5:2005 Part 5: Bridge and gantry cranes
ISO 4314 Surface active agents — Determination of free alkalinity or free acidity — Titrimetric method
ISO 4337:1977 Information processing – Interchangeable magnetic twelve-disk pack (100 Mbytes)
ISO 4341:1978 Information processing – Magnetic tape cassette and cartridge labelling and file structure for information interchange
ISO 4346:1977 Steel wire ropes for general purposes - Lubricants - Basic requirements
ISO 4359:2013 Flow measurement structures – Rectangular, trapezoidal and U-shaped flumes
ISO 4360:2008 Hydrometry – Open channel flow measurement using triangular profile weirs
ISO 4362:1999 Hydrometric determinations – Flow measurement in open channels using structures – Trapezoidal broad-crested weirs
ISO 4363:2002 Measurement of liquid flow in open channels – Methods for measurement of characteristics of suspended sediment
ISO 4364:1997 Measurement of liquid flow in open channels – Bed material sampling
ISO 4365:2005 Liquid flow in open channels – Sediment in streams and canals – Determination of concentration, particle size distribution and relative density
ISO 4366:2007 Hydrometry – Echo sounders for water depth measurements
ISO 4369:1979 Measurement of liquid flow in open channels – Moving-boat method
ISO 4371:1984 Measurement of liquid flow in open channels by weirs and flumes – End depth method for estimation of flow in non-rectangular channels with a free overfall (approximate method)
ISO 4373:2008 Hydrometry – Water level measuring devices
ISO 4374:1990 Liquid flow measurement in open channels – Round-nose horizontal broad-crested weirs
ISO 4375:2014 Hydrometry – Cableway systems for stream gauging
ISO 4377:2012 Hydrometric determinations – Flow measurement in open channels using structures – Flat-V weirs
ISO 4378 Plain bearings - Terms, definitions, classification and symbols
- ISO 4378-1:2017 Part 1: Design, bearing materials and their properties
- ISO 4378-2:2017 Part 2: Friction and wear
- ISO 4378-3:2017 Part 3: Lubrication
- ISO 4378-4:2009 Part 4: Basic symbols
- ISO 4378-5:2009 Part 5: Application of symbols
- ISO/TR 4378-6:2012 Part 6: Abbreviated terms
ISO 4412 Hydraulic fluid power – Test code for determination of airborne noise levels
- ISO 4412-1:1991 Part 1: Pumps
- ISO 4412-2:1991 Part 2: Motors
- ISO 4412-3:1991 Part 3: Pumps – Method using a parallelepiped microphone array
ISO 4413:2010 Hydraulic fluid power – General rules and safety requirements for systems and their components
ISO 4481:1977 Cutlery and flatware – Nomenclature
ISO 4548 Methods of test for full-flow lubricating oil filters for internal combustion engines
- ISO 4548-7:2012 Part 7: Vibration fatigue test
ISO 4551:1987 Ferroalloys - Sampling and sieve analysis
ISO 4552 Ferroalloys - Sampling and sample preparation for chemical analysis
- ISO 4552-1:1987 Part 1: Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese
- ISO 4552-2:1987 Part 2: Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium, ferrovanadium
ISO 4578 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
ISO 4582 Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
ISO 4587 Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
ISO 4618:2014 Paints and varnishes – Terms and definitions
ISO 4628 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- ISO 4628-1 General introduction and designation system
- ISO 4628-2 Assessment of degree of blistering
- ISO 4628-3 Assessment of degree of rusting
- ISO 4628-4 Assessment of degree of cracking
- ISO 4628-5 Assessment of degree of flaking
- ISO 4628-6 Assessment of degree of chalking by tape method
- ISO 4628-7 Assessment of degree of chalking by velvet method
- ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe
- ISO 4628-10 Assessment of degree of filiform corrosion
ISO 4683 Raw sheep skins
- ISO 4683-1:1998 Part 1: Descriptions of defects
ISO 4720:2009 Essential oils – Nomenclature
ISO 4730:2017 Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil)
ISO 4786:1977 Enclosed-scale adjustable-range thermometers
ISO 4787:2010 Laboratory glassware – Volumetric instruments – Methods for testing of capacity and for use
ISO 4788:2005 Laboratory glassware – Graduated measuring cylinders
ISO 4791 Laboratory apparatus – Vocabulary relating to apparatus made essentially from glass, porcelain or vitreous silica
- ISO 4791-1:1985 Part 1: Names for items of apparatus
ISO 4795:1996 Glass for thermometer bulbs
ISO 4801:1979 Glass alcoholometers and alcohol hydrometers not incorporating a thermometer
ISO 4805:1982 Laboratory glassware – Thermo-alcoholometers and alcohol-thermohydrometers
ISO 4831:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the detection and enumeration of coliforms – Most probable number technique
ISO 4832:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of coliforms – Colony-count technique
ISO 4833 Microbiology of the food chain – Horizontal method for the enumeration of microorganisms
- ISO 4833-1:2013 Part 1: Colony count at 30 degrees C by the pour plate technique
- ISO 4833-2:2013 Part 2: Colony count at 30 degrees C by the surface plating technique
ISO 4866:2010 Mechanical vibration and shock – Vibration of fixed structures – Guidelines for the measurement of vibrations and evaluation of their effects on structures
ISO 4871:1996 Acoustics – Declaration and verification of noise emission values of machinery and equipment
ISO/IEC 4873:1991 Information technology – ISO 8-bit code for information interchange – Structure and rules for implementation
ISO 4875 Metal-cutting band saw blades
- ISO 4875-1:2006 Part 1: Vocabulary
ISO 4880:1997 Burning behaviour of textiles and textile products - Vocabulary
ISO 4882:1979 Office machines and data processing equipment - Line spacings and character spacings
ISO 4885:2017 Ferrous materials - Heat treatments - Vocabulary
ISO 4892 Plastics – Methods of exposure to laboratory light sources
ISO 4902:1989 Information technology – Data communication – 37-pole DTE/DCE interface connector and contact number assignments
ISO 4903:1989 Information technology – Data communication – 15-pole DTE/DCE interface connector and contact number assignments
ISO/IEC 4909:2006 Identification cards - Financial transaction cards - Magnetic stripe data content for track 3
ISO 4921:2000 Knitting – Basic concepts – Vocabulary

ISO 5000 – ISO 8999

ISO 5006:2017 Earth-moving machinery - Operator's field of view - Test method and performance criteria
ISO 5010:2007 Earth-moving machinery - Rubber-tyred machines - Steering requirements
ISO 5011:2014 Inlet air cleaning equipment for internal combustion engines and compressors - Performance testing
ISO 5053 Industrial trucks – Terminology and classification
- ISO 5053-1:2015 Part 1: Types of industrial trucks
ISO 5122:1979 Documentation - Abstract sheets in serial publications
ISO 5123:1984 Documentation - Headers for microfiche of monographs and serials
ISO 5127:2017 Information and documentation - Foundation and vocabulary
ISO 5128:1980 Acoustics – Measurement of noise inside motor vehicles
ISO 5129:2001 Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight
ISO 5130:2007 Acoustics – Measurements of sound pressure level emitted by stationary road vehicles
ISO 5131:2015 Tractors for agriculture and forestry – Measurement of noise at the operator's position – Survey method
ISO 5135:1997 Acoustics – Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
ISO 5136:2003 Acoustics – Determination of sound power radiated into a duct by fans and other air-moving devices – In-duct method
ISO 5138 Office machines - Vocabulary
- ISO 5138-1:1978 Part 1: Dictation equipment
- ISO 5138-2:1980 Part 2: Duplicators
- ISO 5138-3:1981 Part 3: Addressing machines
- ISO 5138-4:1981 Part 4: Letter opening machines
- ISO 5138-5:1981 Part 5: Letter folding machines
- ISO 5138-7:1986 Part 7: Postal franking machines
- ISO 5138-9:1984 Part 9: Typewriters
ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
- ISO 5167-1:2003 Part 1: General principles and requirements
- ISO 5167-2:2003 Part 2: Orifice plates
- ISO 5167-3:2003 Part 3: Nozzles and Venturi nozzles
- ISO 5167-4:2003 Part 4: Venturi tubes
- ISO 5167-5:2016 Part 5: Cone meters
ISO 5168:2005 Measurement of fluid flow – Procedures for the evaluation of uncertainties
ISO 5211:2017 Industrial valves - Part-turn actuator attachments
ISO/IEC 5218 Information technology – Codes for the representation of human sexes
ISO 5232:1998 Graphical symbols for textile machinery
ISO 5234:2005 Textile machinery and accessories – Metallic card clothing – Definitions of dimensions, types and mounting
ISO 5238 Textile machinery and accessories – Packages of yarns and intermediate products
- ISO 5238-1:1982 Part 1: Terminology
ISO 5239:1980 Textile machinery and accessories – Winding – Basic terms
ISO 5247 Textile machinery and accessories – Weaving machines
- ISO 5247-1:2004 Part 1: Vocabulary and classification
- ISO 5247-3:1993 Part 3: Parts of the machine – Vocabulary
ISO 5248:2003 Textile machinery and accessories – Dyeing and finishing machinery – Vocabulary for ancillary devices
ISO 5250:2003 Textile machinery and accessories – Dyeing and finishing machinery – Terms for tentering and heat-treatment machinery
ISO 5261:1995 Technical drawings – Simplified representation of bars and profile sections
ISO 5284:1986 Conveyor belts – List of equivalent terms
ISO 5288:2001 Synchronous belt drives - Vocabulary
ISO 5323:1984 Solid wood parquet and raw parquet blocks – Vocabulary
ISO 5329:1978 Solid wood paving blocks – Vocabulary
ISO 5344:2004 Electrodynamic vibration generating systems – Performance characteristics
ISO 5347 Methods for the calibration of vibration and shock pick-ups
- ISO 5347-8:1993 Part 8: Primary calibration by dual centrifuge
- ISO 5347-12:1993 Part 12: Testing of transverse shock sensitivity
- ISO 5347-13:1993 Part 13: Testing of base strain sensitivity
- ISO 5347-15:1993 Part 15: Testing of acoustic sensitivity
- ISO 5347-16:1993 Part 16: Testing of mounting torque sensitivity
- ISO 5347-17:1993 Part 17: Testing of fixed temperature sensitivity
- ISO 5347-18:1993 Part 18: Testing of transient temperature sensitivity
- ISO 5347-22:1997 Part 22: Accelerometer resonance testing – General methods
ISO 5348:1998 Mechanical vibration and shock – Mechanical mounting of accelerometers
ISO 5356 Anaesthetic and respiratory equipment – Conical connectors
- ISO 5356-1:2015 Part 1: Cones and sockets
- ISO 5356-2:2012 Part 2: Screw-threaded weight-bearing connectors
ISO 5358:1992 Anaesthetic machines for use with humans
ISO 5359:2014 Anaesthetic and respiratory equipment – Low-pressure hose assemblies for use with medical gases
ISO 5360:2016 Anaesthetic vaporizers – Agent-specific filling systems
ISO 5361:2016 Anaesthetic and respiratory equipment – Tracheal tubes and connectors
ISO 5362:2006 Anaesthetic reservoir bags
ISO 5364:2016 Anaesthetic and respiratory equipment – Oropharyngeal airways
ISO 5366:2016 Anaesthetic and respiratory equipment – Tracheostomy tubes and connectors
ISO 5367:2014 Anaesthetic and respiratory equipment – Breathing sets and connectors
ISO 5391:2003 Pneumatic tools and machines - Vocabulary
ISO 5396:1977 Hardmetal heading dies - Terminology
ISO 5408:2009 Screw threads - Vocabulary
ISO 5419:1982 Twist drills - Terms, definitions and types
ISO 5420:1983 Reamers - Terms, definitions and types
ISO 5426:1983 Information and documentation - Extension of the Latin alphabet coded character set for bibliographic information interchange^{[Note 3]}
- ISO 5426-2:1996 Part 2: Latin characters used in minor European languages and obsolete typography
ISO 5427:1984 Extension of the Cyrillic alphabet coded character set for bibliographic information interchange
ISO 5428:1984 Greek alphabet coded character set for bibliographic information interchange
ISO 5436 Geometrical Product Specifications (GPS) – Surface texture: Profile method; Measurement standards
- ISO 5436-1:2000 Part 1: Material measures
- ISO 5436-2:2012 Part 2: Software measurement standards
ISO 5445:1980 Ferrosilicon - Specification and conditions of delivery
ISO 5446:2017 Ferromanganese - Specification and conditions of delivery
ISO 5447:1980 Ferrosilicomanganese - Specification and conditions of delivery
ISO 5448:1981 Ferrochromium - Specification and conditions of delivery
ISO 5449:1980 Ferrosilicochromium - Specification and conditions of delivery
ISO 5450:1980 Ferrotungsten - Specification and conditions of delivery
ISO 5451:1980 Ferrovanadium - Specification and conditions of delivery
ISO 5452:1980 Ferromolybdenum - Specification and conditions of delivery
ISO 5453:1980 Ferroniobium - Specification and conditions of delivery
ISO 5454:1980 Ferrotitanium - Specification and conditions of delivery
ISO 5455:1979 Technical drawings – Scales
ISO 5456 Technical drawings – Projection methods
- ISO 5456-1:1996 Part 1: Synopsis
- ISO 5456-2:1996 Part 2: Orthographic representations
- ISO 5456-3:1996 Part 3: Axonometric representations
- ISO 5456-4:1996 Part 4: Central projection
ISO 5457:1999 Technical product documentation – Sizes and layout of drawing sheets
ISO 5458:1998 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Positional tolerancing
ISO 5459:2011 Geometrical product specifications (GPS) – Geometrical tolerancing – Datums and datum systems
ISO 5479:1997 Statistical interpretation of data - Tests for departure from the normal distribution
ISO 5492:2008 Sensory analysis – Vocabulary
ISO 5496:2006 Sensory analysis – Methodology – Initiation and training of assessors in the detection and recognition of odours
ISO 5507:2002 Oilseeds, vegetable oils and fats – Nomenclature
ISO 5526:2013 Cereals, pulses and other food grains – Nomenclature
ISO 5527:2015 Cereals – Vocabulary
ISO 5572:1987 Shipbuilding and marine structures - Numbering of equipment and structural elements in ships
ISO 5576:1997 Non-destructive testing - Industrial X-ray and gamma-ray radiology - Vocabulary
ISO 5577:2017 Non-destructive testing - Ultrasonic testing - Vocabulary
ISO 5593:1997 Rolling bearings - Vocabulary
ISO 5598:2008 Fluid power systems and components - Vocabulary
ISO 5652:1984 Information processing – 9-Track, 12,7 mm (0.5 in) wide magnetic tape for information interchange – Format and recording, using group coding at 246 cpmm (6 250 cpi)
ISO 5653:1980 Information processing – Interchangeable magnetic twelve-disk pack (200 Mbytes)
ISO 5654 Information processing – Data interchange on 200 mm (8 in) flexible disk cartridges using two-frequency recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on one side
- ISO 5654-1:1984 Part 1: Dimensional, physical and magnetic characteristics
- ISO 5654-2:1985 Part 2: Track format
ISO 5659 Plastics - Smoke generation
- ISO 5659-1:1996 Part 1: Guidance on optical-density testing [Withdrawn: replaced by ISO 5659-2:2012]
- ISO 5659-2:2017 Part 2: Determination of optical density by a single-chamber test
- ISO/TR 5659-3:1999 Part 3: Determination of optical density by a dynamic-flow method [Withdrawn, no replacement]
ISO 5660 Reaction-to-fire tests – Heat release, smoke production and mass loss rate
- ISO 5660-1 Heat release rate (cone calorimeter method)
- ISO 5660-2 Smoke production rate (dynamic measurement)
- ISO/TS 5660-3 Guidance on measurement
ISO 5681:1992 Equipment for crop protection – Vocabulary
ISO 5702:1983 Equipment for harvesting – Combine harvester component parts – Equivalent terms
ISO 5725 Accuracy (trueness and precision) of measurement methods and results
- ISO 5725-1:1994 Part 1: General principles and definitions
- ISO 5725-2:1994 Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
- ISO 5725-3:1994 Part 3: Intermediate measures of the precision of a standard measurement method
- ISO 5725-4:1994 Part 4: Basic methods for the determination of the trueness of a standard measurement method
- ISO 5725-5:1998 Part 5: Alternative methods for the determination of the precision of a standard measurement method
- ISO 5725-6:1994 Part 6: Use in practice of accuracy values
ISO 5742:2004 Pliers and nippers - Nomenclature
ISO 5775 Bicycle tires and rims
ISO 5776 Graphic technology - Symbols for text correction
ISO 5800:2001 Photography – Colour negative films for still photography – Determination of ISO speed
ISO 5806:1984 Information processing - Specification of single-hit decision tables
ISO 5807:1985 Information processing - Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts
ISO 5826:2014 Resistance welding equipment – Transformers – General specifications applicable to all transformers
ISO 5832 Implants for surgery – Metallic materials
- ISO 5832-1:2016 Part 1: Wrought stainless steel
- ISO 5832-2:1999 Part 2: Unalloyed titanium
- ISO 5832-3:2016 Part 3: Wrought titanium 6-aluminium 4-vanadium alloy
- ISO 5832-4:2014 Part 4: Cobalt-chromium-molybdenum casting alloy
- ISO 5832-5:2005 Part 5: Wrought cobalt-chromium-tungsten-nickel alloy
- ISO 5832-6:1997 Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy
- ISO 5832-7:2016 Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy
- ISO 5832-8:1997 Part 8: Wrought cobalt-nickel-chromium-molybdenum- tungsten-iron alloy
- ISO 5832-9:2007 Part 9: Wrought high nitrogen stainless steel
- ISO 5832-11:2014 Part 11: Wrought titanium 6-aluminium 7-niobium alloy
- ISO 5832-12:2007 Part 12: Wrought cobalt-chromium-molybdenum alloy
- ISO 5832-14:2007 Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy
ISO 5833:2002 Implants for surgery – Acrylic resin cements
ISO 5834 Implants for surgery – Ultra-high-molecular-weight polyethylene
- ISO 5834-1:2005 Part 1: Powder form
- ISO 5834-2:2011 Part 2: Moulded forms
- ISO 5834-3:2005 Part 3: Accelerated ageing methods
- ISO 5834-4:2005 Part 4: Oxidation index measurement method
- ISO 5834-5:2005 Part 5: Morphology assessment method
ISO 5835:1991 Implants for surgery – Metal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread – Dimensions
ISO 5836:1988 Implants for surgery – Metal bone plates – Holes corresponding to screws with asymmetrical thread and spherical under-surface
ISO 5837 Implants for surgery – Intramedullary nailing systems
- ISO 5837-1:1985 Part 1: Intramedullary nails with cloverleaf or V-shaped cross-section
ISO 5838 Implants for surgery – Metallic skeletal pins and wires^{[Note 3]}
- ISO 5838-1:2013 Part 1: General requirements
- ISO 5838-2:1991 Part 2: Steinmann skeletal pins – Dimensions
- ISO 5838-3:1993 Part 3: Kirschner skeletal wires
ISO 5840 Cardiovascular implants – Cardiac valve prostheses
- ISO 5840-1:2015 Part 1: General requirements
- ISO 5840-2:2015 Part 2: Surgically implanted heart valve substitutes
- ISO 5840-3:2013 Part 3: Heart valve substitutes implanted by transcatheter techniques
ISO 5841 Implants for surgery – Cardiac pacemakers
- ISO 5841-2:2014 Part 2: Reporting of clinical performance of populations of pulse generators or leads
- ISO 5841-3:2013 Part 3: Low-profile connectors (IS-1) for implantable pacemakers
ISO 5843 Aerospace - List of equivalent terms^{[Note 3]}
- ISO 5843-1:1985 Part 1: Aerospace electrical equipment
- ISO 5843-2:1990 Part 2: Aerospace rivets
- ISO 5843-3:1997 Part 3: Aerospace bolts and nuts
- ISO 5843-4:1990 Part 4: Flight dynamics
- ISO 5843-5:1990 Part 5: Environmental and operating conditions for aircraft equipment
- ISO 5843-6:1985 Part 6: Standard atmosphere
- ISO 5843-8:1988 Part 8: Aircraft reliability
- ISO 5843-9:1988 Part 9: Aircraft
- ISO 5843-10:1988 Part 10: Aircraft structure
ISO 5845 Technical drawings – Simplified representation of the assembly of parts with fasteners
- ISO 5845-1:1995 Part 1: General principles
- ISO 5845-2:1995 Part 2: Rivets for aerospace equipment
ISO 5859:2014 Aerospace series - Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components
ISO 5878:1982 Reference atmospheres for aerospace use
ISO 5893 Rubber and plastics test equipment – Tensile, flexural and compression types (constant rate of traverse) – Specification
ISO 5963:1985 Documentation - Methods for examining documents, determining their subjects, and selecting indexing terms
ISO 5964 Documentation – Guidelines for the establishment and development of multilingual thesauri
ISO 5967:1981 Taps and thread cutting - Nomenclature of the main types and terminology
ISO 5968:1981 Circular screwing dies - Terminology
ISO 5971:1981 Size designation of clothes – Pantyhose
ISO 5989:1995 Photography - Pre-packaged chemicals for the processing of silver halide based photographic materials - Vocabulary
ISO 5993 Sodium hydroxide for industrial use—Determination of mercury content—Flameless atomic absorption spectrometric method
ISO 6009:2016 Hypodermic needles for single use – Colour coding for identification
ISO 6011:2003 Earth-moving machinery – Visual display of machine operation
ISO 6050:1987 Shipbuilding - Bulbous bow and side thruster symbols
ISO 6068:1985 Information processing – Recording characteristics of instrumentation magnetic tape (including telemetry systems) – Interchange requirements
ISO 6070:1981 Auxiliary tables for vibration generators – Methods of describing equipment characteristics
ISO 6078:1982 Black tea – Vocabulary
ISO 6093:1985 Information processing - Representation of numerical values in character strings for information interchange
ISO 6098:1984 Information processing – Self-loading cartridges for 12,7 mm (0.5 in) wide magnetic tape
ISO 6107 Water quality—Vocabulary
- ISO 6107-1:2004 (No part title)
- ISO 6107-2:2006 (No part title)
- ISO 6107-3:1993 (No part title)
- ISO 6107-4:1993 (No part title)
- ISO 6107-5:2004 (No part title)
- ISO 6107-6:2004 (No part title)
- ISO 6107-7:2006 (No part title)
- ISO 6107-8:1993 (No part title)
- ISO 6107-9:1997 Part 9: Alphabetical list and subject index
ISO 6152:1982 Thermometers for use with alcoholometers and alcohol hydrometers
ISO 6160:1979 Programming languages - PL/1
ISO 6165:2012 Earth-moving machinery – Basic types – Identification and terms and definitions
ISO 6166:2013 Securities and related financial instruments – International securities identification numbering system (ISIN)
ISO 6173:1982 Open-end spinning machines – Vocabulary
ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
- ISO 6194-2:2009 Part 2: Vocabulary
- ISO 6194-5 Identification of visual imperfections
ISO 6196 Micrographics - Vocabulary
- ISO 6196-1:1993 Part 1: General terms
- ISO 6196-2:1993 Part 2: Image positions and methods of recording
- ISO 6196-3:1997 Part 3: Film processing
- ISO 6196-4:1998 Part 4: Materials and packaging
- ISO 6196-5:1987 Part 5: Quality of images, legibility, inspection
- ISO 6196-6:1992 Part 6: Equipment
- ISO 6196-7:1992 Part 7: Computer micrographics
- ISO 6196-8:1998 Part 8: Use
- ISO 6196-10:1999 Part 10: Index
ISO 6206:1979 Chemical products for industrial use – Sampling – Vocabulary
ISO 6217:1982 Shipbuilding – Inland navigation – Pilot craft – Identification painting and inscriptions
ISO 6222:1999 Water quality – Enumeration of culturable micro-organisms – Colony count by inoculation in a nutrient agar culture medium
ISO 6284:1996 Construction drawings – Indication of limit deviations
ISO 6289:2003 Skis – Vocabulary
ISO 6336 Calculation of load capacity of spur and helical gears
ISO 6344 Coated abrasives – Grain size analysis
ISO 6345:1990 Shipbuilding and marine structures – Windows and side scuttles – Vocabulary
ISO 6346 Freight containers – Coding, identification and marking
ISO 6348:1980 Textiles – Determination of mass – Vocabulary
ISO 6352:1985 Ferronickel - Determination of nickel content - Dimethylglyoxime gravimetric method
ISO 6357:1985 Documentation – Spine titles on books and other publications
ISO 6372:2017 Nickel and nickel alloys – Terms and definitions
ISO 6385:2016 Ergonomics principles in the design of work systems
ISO 6393:2008 Earth-moving machinery – Determination of sound power level – Stationary test conditions
ISO 6394:2008 Earth-moving machinery – Determination of emission sound pressure level at operator's position – Stationary test conditions
ISO 6395:2008 Earth-moving machinery – Determination of sound power level – Dynamic test conditions
ISO 6396:2008 Earth-moving machinery – Determination of emission sound pressure level at operator's position – Dynamic test conditions
ISO 6405 Earth-moving machinery - Symbols for operator controls and other displays
- ISO 6405-1:2017 Part 1: Common symbols
- ISO 6405-2:2017 Part 2: Symbols for specific machines, equipment and accessories
ISO 6410 Technical drawings – Screw threads and threaded parts
- ISO 6410-1:1993 Part 1: General conventions
- ISO 6410-2:1993 Part 2: Screw thread inserts
- ISO 6410-3:1993 Part 3: Simplified representation
ISO 6411:1982 Technical drawings – Simplified representation of centre holes
ISO 6412 Technical drawings – Simplified representation of pipelines
- ISO 6412-1:2017 Part 1: General rules and orthogonal representation
- ISO 6412-2:2017 Part 2: Isometric projection
- ISO 6412-3:2017 Part 3: Terminal features of ventilation and drainage systems
ISO 6413:1988 Technical drawings – Representation of splines and serrations
ISO 6414:1982 Technical drawings for glassware
ISO 6416:2017 Hydrometry – Measurement of discharge by the ultrasonic transit time (time of flight) method
ISO 6420:2016 Hydrometry – Position fixing equipment for hydrometric boats
ISO 6421:2012 Hydrometry – Methods for assessment of reservoir sedimentation
ISO 6422 Layout key for trade documents
- ISO 6422-1:2010 Part 1: Paper-based documents
ISO 6425:1996 Divers' watches
ISO 6426 Horological vocabulary
- ISO 6426-1:1982 Part 1: Technical and scientific definitions
- ISO 6426-2:2002 Part 2: Technical and commercial definitions
ISO 6428:1982 Technical drawings – Requirements for microcopying
ISO/IEC 6429:1992 Information technology – Control functions for coded character sets
ISO 6433:2012 Technical product documentation – Part references
ISO 6438:1983 Documentation – African coded character set for bibliographic information interchange
ISO 6461 Water quality – Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia)
- ISO 6461-1:1986 Part 1: Method by enrichment in a liquid medium
- ISO 6461-2:1986 Part 2: Method by membrane filtration
ISO 6467:1980 Ferrovanadium - Determination of vanadium content - Potentiometric method
ISO 6472:2017 Rubber compounding ingredients – Abbreviated terms
ISO 6474 Implants for surgery – Ceramic materials
- ISO 6474-1:2010 Part 1: Ceramic materials based on high purity alumina
- ISO 6474-2:2012 Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement
ISO 6475:1989 Implants for surgery – Metal bone screws with asymmetrical thread and spherical under-surface – Mechanical requirements and test methods
ISO 6501:1988 Ferronickel - Specification and delivery requirements
ISO 6518 Road vehicles – Ignition systems
- ISO 6518-1:2002 Part 1: Vocabulary
ISO/IEC 6522:1992 Information technology - Programming languages - PL/1 general purpose subset
ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts
ISO 6531:2017 Machinery for forestry – Portable chain-saws – Vocabulary
ISO 6552:1980 Automatic steam traps - Definition of technical terms
ISO 6579 Microbiology of the food chain – Horizontal method for the detection, enumeration and serotyping of Salmonella^{[Note 3]}
- ISO 6579-1:2017 Part 1: Detection of Salmonella spp.
- ISO/TS 6579-2:2012 Part 2: Enumeration by a miniaturized most probable number technique
- ISO/TR 6579-3:2014 Part 3: Guidelines for serotyping of Salmonella spp.
ISO 6586:1980 Data processing - Implementation of the ISO 7- bit and 8- bit coded character sets on punched cards
ISO 6590 Packaging – Sacks – Vocabulary and types
- ISO 6590-1:1983 Part 1: Paper sacks
- ISO 6590-2:1986 Part 2: Sacks made from thermoplastic flexible film
ISO 6594 Cast iron drainage pipes and fittings – Spigot series
ISO 6596 Information processing – Data interchange on 130 mm (5.25 in) flexible disk cartridges using two-frequency recording at 7 958 ftprad, 1.9 tpmm (48 tpi), on one side
- ISO 6596-1:1985 Part 1: Dimensional, physical and magnetic characteristics
- ISO 6596-2:1985 Part 2: Track format
ISO 6611:2004 Milk and milk products – Enumeration of colony-forming units of yeasts and/or moulds – Colony-count technique at 25 degrees C
ISO 6621 Internal combustion engines – Piston rings
- ISO 6621-1:2007 Part 1: Vocabulary
ISO 6630:1986 Documentation - Bibliographic control characters
ISO 6689 Equipment for harvesting – Combines and functional components
- ISO 6689-1:1997 Part 1: Vocabulary
ISO 6706:1981 Plastics laboratory ware – Graduated measuring cylinders
ISO 6707 Buildings and civil engineering works – Vocabulary
- ISO 6707-1:2014 Part 1: General terms
- ISO 6707-2:2014 Part 2: Contract terms
- ISO 6707-3:2017 Part 3: Sustainability terms
ISO 6709:2008 Standard representation of geographic point location by coordinates
ISO 6710:2017 Single-use containers for human venous blood specimen collection
ISO 6725:1981 Road vehicles – Dimensions of two-wheeled mopeds and motorcycles – Terms and definitions
ISO 6726:1988 Mopeds and motorcycles with two wheels – Masses – Vocabulary
ISO 6727:2012 Road vehicles - Motorcycles - Symbols for controls, indicators and tell-tales
ISO 6730:2005 Milk – Enumeration of colony-forming units of psychrotrophic microorganisms – Colony-count technique at 6,5 degrees C
ISO 6747:2013 Earth-moving machinery – Dozers – Terminology and commercial specifications
ISO 6780 Flat pallets for intercontinental materials handling — Principal dimensions and tolerances
ISO 6798:1995 Reciprocating internal combustion engines – Measurement of emitted airborne noise – Engineering method and survey method
ISO 6811:1998 Spherical plain bearings - Vocabulary
ISO 6813:1998 Road vehicles – Collision classification – Terminology
ISO 6814:2009 Machinery for forestry – Mobile and self-propelled machinery – Terms, definitions and classification
ISO 6861:1996 Information and documentation - Glagolitic alphabet coded character set for bibliographic information interchange
ISO 6862:1996 Information and documentation - Mathematical coded character set for bibliographic information interchange
ISO 6883:2017 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air)
ISO 6887 Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination^{[Note 3]}
- ISO 6887-1:2017 Part 1: General rules for the preparation of the initial suspension and decimal dilutions
- ISO 6887-2:2017 Part 2: Specific rules for the preparation of meat and meat products
- ISO 6887-3:2017 Part 3: Specific rules for the preparation of fish and fishery products
- ISO 6887-4:2017 Part 4: Specific rules for the preparation of miscellaneous products
- ISO 6887-5:2010 Part 5: Specific rules for the preparation of milk and milk products
- ISO 6887-6:2013 Part 6: Specific rules for the preparation of samples taken at the primary production stage
ISO 6888 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species)
- ISO 6888-1:1999 Part 1: Technique using Baird-Parker agar medium
- ISO 6888-2:1999 Part 2: Technique using rabbit plasma fibrinogen agar medium
- ISO 6888-3:2003 Part 3: Detection and MPN technique for low numbers
ISO 6892 Metallic materials – Tensile testing
- ISO 6892-1 Method of test at room temperature
- ISO 6892-2 Method of test at elevated temperature
- ISO 6892-3 Method of test at low temperature
- ISO 6892-4 Method of test in liquid helium
ISO 6926:2016 Acoustics – Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels
ISO 6927:2012 Buildings and civil engineering works – Sealants – Vocabulary
ISO 6929:2013 Steel products – Vocabulary
ISO 6936:1988 Information processing - Conversion between the two coded character sets of ISO 646 and ISO 6937-2 and the CCITT international telegraph alphabet No. 2 (ITA 2)
ISO/IEC 6937:2001 Information technology - Coded graphic character set for text communication - Latin alphabet
ISO 6938:2012 Textiles – Natural fibres – Generic names and definitions
ISO 6946 Building components and building elements – Thermal resistance and thermal transmittance – Calculation method
ISO 6951:1986 Information processing - Processor system bus interface (Eurobus A)
ISO 6974-1:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography Part 1: General guidelines and calculation of composition
ISO 6974-2:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography Part 2: Uncertainty calculations
ISO 6974-3:2001 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
ISO 6974-4:2001 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
ISO 6974-5:2001 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 5: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns
ISO 6974-6: 2008 Natural gas — Determination of composition with defined uncertainty by gas chromatography — Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
ISO 6980 Nuclear energy - Reference beta-particle radiation
- ISO 6980-1:2006 Part 1: Methods of production
- ISO 6980-2:2004 Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
- ISO 6980-3:2006 Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence
ISO 7000:2014 Graphical symbols for use on equipment - Registered symbols
ISO 7001:2007 Graphical symbols – Public information symbols
ISO 7002 Agricultural food products – Layout for a standard method of sampling from a lot
ISO 7010:2011 Graphical symbols - Safety colours and safety signs - Registered safety signs
ISO 7029:2017 Acoustics - Statistical distribution of hearing thresholds related to age and gender
ISO 7056:1981 Plastics laboratory ware – Beakers
ISO/IEC 7064:2003 Information technology - Security techniques - Check character systems
ISO 7065 Information processing – Data interchange on 200 mm (8 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on both sides
- ISO 7065-1:1985 Part 1: Dimensional, physical and magnetic characteristics
- ISO 7065-2:1985 Part 2: Track format
ISO 7066 Assessment of uncertainty in the calibration and use of flow measurement devices
- ISO 7066-2:1988 Part 2: Non-linear calibration relationships
ISO 7078:1985 Building construction – Procedures for setting out, measurement and surveying – Vocabulary and guidance notes
ISO 7083:1983 Technical drawings – Symbols for geometrical tolerancing – Proportions and dimensions
ISO 7087:1984 Ferroalloys - Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling
ISO 7088:1981 Fish-meal – Vocabulary
ISO 7098:2015 Information and documentation – Romanization of Chinese
ISO 7112:2017 Machinery for forestry – Portable brush-cutters and grass-trimmers – Vocabulary
ISO 7130:2013 Earth-moving machinery – Operator training – Content and methods
ISO 7131:2009 Earth-moving machinery – Loaders – Terminology and commercial specifications
ISO 7132:2003 Earth-moving machinery – Dumpers – Terminology and commercial specifications
ISO 7133:2013 Earth-moving machinery – Scrapers – Terminology and commercial specifications
ISO 7134:2013 Earth-moving machinery – Graders – Terminology and commercial specifications
ISO 7135:2009 Earth-moving machinery – Hydraulic excavators – Terminology and commercial specifications
ISO 7136:2006 Earth-moving machinery – Pipelayers – Terminology and commercial specifications
ISO 7137:1995 Aircraft - Environmental conditions and test procedures for airborne equipment
ISO 7144:1986 Documentation – Presentation of theses and similar documents
ISO 7151:1988 Surgical instruments – Non-cutting, articulated instruments – General requirements and test methods
ISO 7152:1997 Camping tents and caravan awnings – Vocabulary and list of equivalent terms
ISO 7153 Surgical instruments – Materials
- ISO 7153-1:2016 Part 1: Metals
ISO 7154:1983 Documentation - Bibliographic filing principles
ISO 7176 Wheelchairs
- ISO 7176-21:2009 Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers
- ISO 7176-26:2007 Part 26: Vocabulary
ISO 7185:1990 Information technology - Programming languages - Pascal
ISO 7194:2008 Measurement of fluid flow in closed conduits – Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
ISO 7196:1995 Acoustics – Frequency-weighting characteristic for infrasound measurements
ISO 7197:2006 Neurosurgical implants – Sterile, single-use hydrocephalus shunts and components
ISO 7198:2016 Cardiovascular implants and extracorporeal systems – Vascular prostheses – Tubular vascular grafts and vascular patches
ISO 7199:2016 Cardiovascular implants and artificial organs – Blood-gas exchangers (oxygenators)
ISO 7200:2004 Technical product documentation – Data fields in title blocks and document headers
ISO 7206 Implants for surgery – Partial and total hip joint prostheses
- ISO 7206-1:2008 Part 1: Classification and designation of dimensions
- ISO 7206-2:2011 Part 2: Articulating surfaces made of metallic, ceramic and plastics materials
- ISO 7206-4:2010 Part 4: Determination of endurance properties and performance of stemmed femoral components
- ISO 7206-6:2013 Part 6: Endurance properties testing and performance requirements of neck region of stemmed femoral components
- ISO 7206-10:2003 Part 10: Determination of resistance to static load of modular femoral heads
- ISO 7206-12:2016 Part 12: Deformation test method for acetabular shells
- ISO 7206-13:2016 Part 13: Determination of resistance to torque of head fixation of stemmed femoral components
ISO 7207 Implants for surgery – Components for partial and total knee joint prostheses
- ISO 7207-1:2007 Part 1: Classification, definitions and designation of dimensions
- ISO 7207-2:2011 Part 2: Articulating surfaces made of metal, ceramic and plastics materials
ISO 7216:2015 Agricultural and forestry tractors – Measurement of noise emitted when in motion
ISO 7218:2007 Microbiology of food and animal feeding stuffs – General requirements and guidance for microbiological examinations
ISO 7220:1996 Information and documentation - Presentation of catalogues of standards
ISO 7237:1993 Caravans – Masses and dimensions – Vocabulary
ISO 7240 Fire detection and alarm systems
ISO 7251:2005 Microbiology of food and animal feeding stuffs – Horizontal method for the detection and enumeration of presumptive Escherichia coli – Most probable number technique
ISO 7255:1985 Shipbuilding – Active control units of ships – Vocabulary
ISO 7275:1985 Documentation – Presentation of title information of series
ISO 7287:2002 Graphical symbols for thermal cutting equipment
ISO 7294:1983 Saw teeth for woodworking saws – Profile shape – Terminology and designation
ISO 7296 Cranes - Graphic symbols
- ISO 7296-1:1991 Part 1: General
- ISO 7296-2:1996 Part 2: Mobile cranes
- ISO 7296-3:2006 Part 3: Tower cranes
ISO 7297:1985 Information processing – Magnetic disk for data storage devices – 96 000 flux transitions per track, 200 mm (7.9 in) outer diameter, 63,5 mm (2.5 in) inner diameter
ISO 7298:1985 Information processing – Magnetic disk for data storage devices – 158 000 flux transitions per track, 210 mm (8.3 in) outer diameter, 100 mm (3.9 in) inner diameter
ISO 7345:1987 Thermal insulation – Physical quantities and definitions
ISO 7347:1987 Ferroalloys - Experimental methods for checking the bias of sampling and sample preparation
ISO 7348:1992 Glass containers – Manufacture – Vocabulary
ISO/IEC 7350:1991 Information technology - Registration of repertoires of graphic characters from ISO/IEC 10367
ISO 7369:2004 Pipework - Metal hoses and hose assemblies - Vocabulary
ISO 7372:2005 Trade data interchange - Trade data elements directory
ISO 7373:1987 Ferroalloys - Experimental methods for checking the precision of sample division
ISO 7376:2009 Anaesthetic and respiratory equipment – Laryngoscopes for tracheal intubation
ISO 7396 Medical gas pipeline systems
- ISO 7396-1:2016 Part 1: Pipeline systems for compressed medical gases and vacuum
- ISO 7396-2:2007 Part 2: Anaesthetic gas scavenging disposal systems
ISO 7404 Methods for the petrographic analysis of coals
- ISO 7404-1:2016 Part 1: Vocabulary
ISO 7437:1990 Technical drawings – Construction drawings – General rules for execution of production drawings for prefabricated structural components
ISO 7462:1985 Shipbuilding - Principal ship dimensions - Terminology and definitions for computer applications
ISO 7478:1987 Information processing systems – Data communication – Multilink procedures
ISO/IEC 7480:1991 Information technology – Telecommunications and information exchange between systems – Start-stop transmission signal quality at DTE/DCE interfaces
ISO 7482 Raw goat skins
- ISO 7482-1:1998 Part 1: Descriptions of defects
ISO/IEC 7487 Information technology – Data interchange on 130 mm (5,25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides – ISO type 202
- ISO/IEC 7487-1:1993 Part 1: Dimensional, physical and magnetic characteristics
- ISO 7487-2:1985 Part 2: Track format A
- ISO 7487-3:1986 Part 3: Track format B
ISO/IEC 7498 Information technology — Open Systems Interconnection — Basic Reference Model^{[Note 3]}
- ISO/IEC 7498-1:1994 The Basic Model
- ISO 7498-2:1989 Part 2: Security Architecture
- ISO/IEC 7498-3:1997 Naming and addressing
- ISO/IEC 7498-4:1989 Part 4: Management framework
ISO/IEC 7501 Identification cards – Machine readable travel documents
- ISO/IEC 7501-1:2008 Part 1: Machine readable passport
- ISO/IEC 7501-2:1997 Part 2: Machine readable visa
- ISO/IEC 7501-3:2005 Part 3: Machine readable official travel documents
ISO 7504:2015 Gas analysis – Vocabulary
ISO 7518:1983 Technical drawings – Construction drawings – Simplified representation of demolition and rebuilding
ISO 7519:1991 Technical drawings – Construction drawings – General principles of presentation for general arrangement and assembly drawings
ISO 7520:1985 Ferronickel - Determination of cobalt content - Flame atomic absorption spectrometric method
ISO 7524:1985 Nickel, ferronickel and nickel alloys - Determination of carbon content - Infra-red absorption method after induction furnace combustion
ISO 7526:1985 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Infra-red absorption method after induction furnace combustion
ISO 7527:1985 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Iodimetric titration method after induction furnace combustion
ISO 7550:1985 Laboratory glassware – Disposable micropipettes
ISO 7563:1998 Fresh fruits and vegetables – Vocabulary
ISO 7568:1986 Woodworking machines – Thickness planing machines with rotary cutterblock for one-side dressing – Nomenclature and acceptance conditions
ISO 7569:1986 Woodworking machines – Planing machines for two-, three- or four-side dressing – Nomenclature and acceptance conditions
ISO 7570:1986 Woodworking machines – Surface planing and thicknessing machines – Nomenclature and acceptance conditions
ISO 7571:1986 Woodworking machines – Surface planing machines with cutterblock for one-side dressing – Nomenclature and acceptance conditions
ISO 7573:2008 Technical product documentation – Parts lists
ISO 7574 Acoustics – Statistical methods for determining and verifying stated noise emission values of machinery and equipment
- ISO 7574-1:1985 Part 1: General considerations and definitions
- ISO 7574-2:1985 Part 2: Methods for stated values for individual machines
- ISO 7574-3:1985 Part 3: Simple (transition) method for stated values for batches of machines
- ISO 7574-4:1985 Part 4: Methods for stated values for batches of machines
ISO 7583:2013 Anodizing of aluminium and its alloys - Terms and definitions
ISO 7626 Mechanical vibration and shock – Experimental determination of mechanical mobility^{[Note 3]}
- ISO 7626-1:2011 Part 1: Basic terms and definitions, and transducer specifications
- ISO 7626-2:2015 Part 2: Measurements using single-point translation excitation with an attached vibration exciter
- ISO 7626-5:1994 Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
ISO 7637 Road vehicles – Electrical disturbances from conduction and coupling
- ISO 7637-1:2015 Part 1: Definitions and general considerations
ISO 7639:1985 Road vehicles - Diagnostic systems - Graphical symbols
ISO 7665:1983 Information processing – File structure and labelling of flexible disk cartridges for information interchange
ISO 7692:1983 Ferrotitanium - Determination of titanium content - Titrimetric method
ISO 7693:1984 Ferrotungsten - Determination of tungsten content - Cinchonine gravimetric method
ISO 7704:1985 Water quality – Evaluation of membrane filters used for microbiological analyses
ISO 7711 Dentistry – Diamond rotary instruments
- ISO 7711-3:2004 Part 3: Grit sizes, designation and colour code
ISO 7712:1983 Laboratory glassware – Disposable Pasteur pipettes
ISO 7736 Road vehicles – Car radio for front installation – Installation space including connections
ISO 7740:1985 Instruments for surgery – Scalpels with detachable blades – Fitting dimensions
ISO 7741:1986 Instruments for surgery – Scissors and shears – General requirements and test methods
ISO/IEC 7776:1995 Information technology – Telecommunications and information exchange between systems – High-level data link control procedures – Description of the X.25 LAPB-compatible DTE data link procedures
ISO 7779:2010 Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment
ISO/IEC 7810 Identification cards – Physical characteristics
ISO/IEC 7811 Identification cards – Recording technique
ISO/IEC 7812 Identification cards – Identification of issuers
ISO/IEC 7813:2006 Information technology – Identification cards – Financial transaction cards
ISO/IEC 7816 Identification cards – Integrated circuit cards^{[Note 3]}
ISO 7839:2005 Textile machinery and accessories – Knitting machines – Vocabulary and classification
ISO/TS 7849 Acoustics – Determination of airborne sound power levels emitted by machinery using vibration measurement
- ISO/TS 7849-1:2009 Part 1: Survey method using a fixed radiation factor
- ISO/TS 7849-2:2009 Part 2: Engineering method including determination of the adequate radiation factor
ISO 7863:1984 Height setting micrometers and riser blocks
ISO 7864:2016 Sterile hypodermic needles for single use – Requirements and test methods
ISO 7870 Control charts
- ISO 7870-1:2014 Part 1: General guidelines
- ISO 7870-2:2013 Part 2: Shewhart control charts
- ISO 7870-3:2012 Part 3: Acceptance control charts
- ISO 7870-4:2011 Part 4: Cumulative sum charts
- ISO 7870-5:2014 Part 5: Specialized control charts
- ISO 7870-6:2016 Part 6: EWMA control charts
- ISO 7870-8:2017 Part 8: Charting techniques for short runs and small mixed batches
ISO 7876 Fuel injection equipment – Vocabulary
- ISO 7876-1:1990 Part 1: Fuel injection pumps
- ISO 7876-2:1991 Part 2: Fuel injectors
- ISO 7876-3:1993 Part 3: Unit injectors
- ISO 7876-4:2004 Part 4: High-pressure pipes and end-connections
- ISO 7876-5:2004 Part 5: Common rail fuel injection system
ISO 7885:2010 Dentistry – Sterile injection needles for single use
ISO 7886 Sterile hypodermic syringes for single use
- ISO 7886-1:2017 Part 1: Syringes for manual use
- ISO 7886-2:1996 Part 2: Syringes for use with power-driven syringe pumps
- ISO 7886-3:2005 Part 3: Auto-disable syringes for fixed-dose immunization
- ISO 7886-4:2006 Part 4: Syringes with re-use prevention feature
ISO 7889:2003 Yogurt – Enumeration of characteristic microorganisms – Colony-count technique at 37 degrees C
ISO 7899 Water quality – Detection and enumeration of intestinal enterococci
- ISO 7899-1:1998 Part 1: Miniaturized method (Most Probable Number) for surface and waste water
- ISO 7899-2:2000 Part 2: Membrane filtration method
ISO 7919 Mechanical vibration – Evaluation of machine vibration by measurements on rotating shafts
- ISO 7919-3:2009 Part 3: Coupled industrial machines
- ISO 7919-4:2009 Part 4: Gas turbine sets with fluid-film bearings
- ISO 7919-5:2005 Part 5: Machine sets in hydraulic power generating and pumping plants
ISO 7929:1985 Information processing – Magnetic disk for data storage devices – 83 000 flux transitions per track, 130 mm (5.12 in) outer diameter, 40 mm (1.57 in) inner diameter
ISO 7932:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of presumptive Bacillus cereus – Colony-count technique at 30 degrees C
ISO 7937:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of Clostridium perfringens – Colony-count technique
ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System (GKS)
ISO 7944:1998 Optics and optical instruments - Reference wavelengths
ISO 7945:1985 Woodworking machines – Single spindle boring machines – Nomenclature and acceptance conditions
ISO 7946:1985 Woodworking machines – Slot mortising machines – Nomenclature and acceptance conditions
ISO 7947:1985 Woodworking machines – Two-, three- and four-side moulding machines – Nomenclature and acceptance conditions
ISO 7948:1987 Woodworking machines – Routing machines – Nomenclature and acceptance conditions
ISO 7949:1985 Woodworking machines – Veneer pack edge shears – Nomenclature and acceptance conditions
ISO 7950:1985 Woodworking machines – Single chain mortising machines – Nomenclature and acceptance conditions
ISO 7957:1987 Woodworking machines – Radial circular saws – Nomenclature and acceptance conditions
ISO 7958:1987 Woodworking machines – Single blade stroke circular sawing machines for lengthwise cutting of solid woods and panels – Nomenclature and acceptance conditions
ISO 7959:1987 Woodworking machines – Double edging precision circular sawing machines – Nomenclature and acceptance conditions
ISO 7960:1995 Airborne noise emitted by machine tools – Operating conditions for woodworking machines
ISO 7967 Reciprocating internal combustion engines - Vocabulary of components and systems
- ISO 7967-1:2005 Part 1: Structure and external covers
- ISO 7967-2:2010 Part 2: Main running gear
- ISO 7967-3:2010 Part 3: Valves, camshaft drives and actuating mechanisms
- ISO 7967-4:2005 Part 4: Pressure charging and air/exhaust gas ducting systems
- ISO 7967-5:2010 Part 5: Cooling systems
- ISO 7967-6:2005 Part 6: Lubricating systems
- ISO 7967-7:2005 Part 7: Governing systems
- ISO 7967-8:2005 Part 8: Starting systems
- ISO 7967-9:2010 Part 9: Control and monitoring systems
- ISO 7967-10:2014 Part 10: Ignition systems
- ISO 7967-11:2014 Part 11: Fuel systems
- ISO 7967-12:2014 Part 12: Exhaust emission control systems
ISO 7983:1988 Woodworking machines – Single blade circular sawing machines with travelling table – Nomenclature and acceptance conditions
ISO 7987:1985 Woodworking machines – Turning lathes – Nomenclature and acceptance conditions
ISO 7988:1988 Woodworking machines – Double-end tenoning machines – Nomenclature and acceptance conditions
ISO 7998:2005 Ophthalmic optics - Spectacle frames - Lists of equivalent terms and vocabulary
ISO 8000 Data quality
ISO 8002:1986 Mechanical vibrations – Land vehicles – Method for reporting measured data
ISO 8015:2011 Geometrical product specifications (GPS) – Fundamentals – Concepts, principles and rules
ISO 8041:2005 Human response to vibration - Measuring instrumentation
- ISO 8041-1:2017 Part 1: General purpose vibration meters
ISO 8042:1988 Shock and vibration measurements – Characteristics to be specified for seismic pick-ups
ISO 8044:2015 Corrosion of metals and alloys – Basic terms and definitions
ISO 8048:1984 Technical drawings – Construction drawings – Representation of views, sections and cuts
ISO 8049:2016 Ferronickel shot - Sampling for analysis
ISO 8050:1988 Ferronickel ingots or pieces - Sampling for analysis
ISO 8062 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts
- ISO 8062-1:2007 Part 1: Vocabulary
- ISO/TS 8062-2:2013 Part 2: Rules
- ISO 8062-3:2007 Part 3: General dimensional and geometrical tolerances and machining allowances for castings
- ISO 8062-4:2017 Part 4: General tolerances for castings using profile tolerancing in a general datum system
ISO 8063 Information processing – Data interchange on 6,30 mm (0.25 in) wide magnetic tape cartridge using IMFM recording at 252 ftpmm (6 400 ftpi)
- ISO 8063-1:1986 Part 1: Mechanical, physical and magnetic properties
- ISO 8063-2:1986 Part 2: Track format and method of recording for data interchange in start/stop mode
ISO 8064:1985 Information processing – Reels for 12,7 mm (0,5 in) wide magnetic tapes – Sizes 16, 18 and 22
ISO/IEC 8072:1996 Information technology – Open systems interconnection – Transport service definition
ISO/IEC 8073:1997 Information technology – Open Systems Interconnection – Protocol for providing the connection-mode transport service
ISO 8088:1994 Equipment for olive cultivation and olive oil production – Vocabulary
ISO 8090:1990 Cycles – Terminology
ISO 8107:1993 Nuclear power plants - Maintainability - Terminology
ISO 8109:1990 Banking and related financial services – Securities – Format of Eurobonds
ISO 8114:1990 Textile machinery and accessories – Spindles for ring-spinning and doubling machines – List of equivalent terms
ISO 8116 Textile machinery and accessories – Beams for winding
- ISO 8116-1:1995 Part 1: General vocabulary
ISO 8119 Textile machinery and accessories – Needles for knitting machines – Terminology
- ISO 8119-1:1989 Part 1: Latch-type needles
- ISO 8119-2:1989 Part 2: Bearded needles
- ISO 8119-3:1992 Part 3: Compound needles
ISO 8147:1995 Shipbuilding and marine structures – Derrick rigs and component parts – Vocabulary
ISO 8152:1984 Earth-moving machinery – Operation and maintenance – Training of mechanics
ISO 8153 Aerospace fluid systems and components – Vocabulary
- ISO 8153-1:2009 Part 1: Hose assemblies
ISO 8157:2015 Fertilizers and soil conditioners – Vocabulary
ISO 8159:1987 Textiles – Morphology of fibres and yarns – Vocabulary
ISO 8160:1987 Textiles – Textured filament yarns – Vocabulary
ISO 8178 Reciprocating internal combustion engines - Exhaust emission measurement
ISO 8180 Ductile iron pipelines – Polyethylene sleeving for site application
ISO 8199:2005 Water quality – General guidance on the enumeration of micro-organisms by culture
ISO/IEC 8208:2000 Information technology – Data communications – X.25 Packet Layer Protocol for Data Terminal Equipment
ISO/IEC 8211:1994 Information technology - Specification for a data descriptive file for information interchange
ISO 8217:2017 Petroleum products - Fuels (class F) - Specifications of marine fuels
ISO 8229:1991 Operations and baths relating to dry-cleaning machines – Vocabulary
ISO 8277:2013 Ships and marine technology – Pipework and machinery – Information transfer
ISO 8297:1994 Acoustics – Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment – Engineering method
ISO 8316:1987 Measurement of liquid flow in closed conduits – Method by collection of the liquid in a volumetric tank
ISO 8317:2015 Child-resistant packaging - Requirements and testing procedures for reclosable packages
ISO 8319 Orthopaedic instruments – Drive connections
- ISO 8319-1:1996 Part 1: Keys for use with screws with hexagon socket heads
- ISO 8319-2:1986 Part 2: Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screws
ISO/IEC 8326:1996 Information technology – Open Systems Interconnection – Session service definition
ISO/IEC 8327 Information technology – Open Systems Interconnection – Connection-oriented Session protocol
- ISO/IEC 8327-1:1996 Protocol specification
- ISO/IEC 8327-2:1996 Protocol Implementation Conformance Statement (PICS) proforma
ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary
ISO 8333:1985 Liquid flow measurement in open channels by weirs and flumes – V-shaped broad-crested weirs
ISO 8343:1985 Ferronickel - Determination of silicon content - Gravimetric method
ISO/IEC 8348:2002 Information technology – Open Systems Interconnection – Network service definition
ISO 8362 Injection containers and accessories
- ISO 8362-1:2009 Part 1: Injection vials made of glass tubing
- ISO 8362-2:2015 Part 2: Closures for injection vials
- ISO 8362-3:2001 Part 3: Aluminium caps for injection vials
- ISO 8362-4:2011 Part 4: Injection vials made of moulded glass
- ISO 8362-5:2016 Part 5: Freeze drying closures for injection vials
- ISO 8362-6:2010 Part 6: Caps made of aluminium-plastics combinations for injection vials
- ISO 8362-7:2006 Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
ISO 8368:1999 Hydrometric determinations – Flow measurements in open channels using structures – Guidelines for selection of structure
ISO 8373:2012 Manipulating industrial robots – Vocabulary
ISO 8378 Information processing – Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on both sides
- ISO 8378-1:1986 Part 1: Dimensional, physical and magnetic characteristics
- ISO 8378-2:1986 Part 2: Track format A
- ISO 8378-3:1986 Part 3: Track format B
ISO 8384:2000 Ships and marine technology – Dredgers – Vocabulary
ISO 8388:1998 Knitted fabrics – Types – Vocabulary
ISO 8421 Fire protection - Vocabulary
- ISO 8421-1:1987 Part 1: General terms and phenomena of fire
- ISO 8421-2:1987 Part 2: Structural fire protection
- ISO 8421-6:1987 Part 6: Evacuation and means of escape
- ISO 8421-7:1987 Part 7: Explosion detection and suppression means
ISO 8422:2006 Sequential sampling plans for inspection by attributes
ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
ISO 8429:1986 Optics and optical instruments – Ophthalmology – Graduated dial scale
ISO 8439:1990 Forms design - Basic layout
ISO 8440:1986 Location of codes in trade documents
ISO/IEC 8441 Information technology – High density digital recording (HDDR)
- ISO/IEC 8441-1:1991 Part 1: Unrecorded magnetic tape for (HDDR) applications
- ISO/IEC 8441-2:1991 Part 2: Guide for interchange practice
ISO 8459:2009 Information and documentation - Bibliographic data element directory for use in data exchange and enquiry
ISO 8462 Information processing – Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi)
- ISO 8462-1:1986 Part 1: Mechanical, physical and magnetic properties
- ISO 8462-2:1986 Part 2: Streaming mode
ISO/IEC 8473 Information technology – Protocol for providing the connectionless-mode network service
- ISO/IEC 8473-1:1998 Protocol specification
- ISO/IEC 8473-2:1996 Part 2: Provision of the underlying service by an ISO/IEC 8802 subnetwork
- ISO/IEC 8473-3:1995 Provision of the underlying service by an X.25 subnetwork
- ISO/IEC 8473-4:1995 Provision of the underlying service by a subnetwork that provides the OSI data link service
- ISO/IEC 8473-5:1997 Provision of the underlying service by ISDN circuit-switched B-channels
ISO/IEC 8480:1995 Information technology – Telecommunications and information exchange between systems – DTE/DCE interface back-up control operation using ITU-T Recommendation V.24 interchange circuits
ISO/IEC 8481:1996 Information technology – Telecommunications and information exchange between systems – DTE to DTE direct connections
ISO/IEC 8482:1993 Information technology – Telecommunications and information exchange between systems – Twisted pair multipoint interconnections
ISO/IEC 8484:2014 Information technology – Magnetic stripes on savingsbooks
ISO 8485:1989 Programming languages - APL
ISO 8498:1990 Woven fabrics – Description of defects – Vocabulary
ISO 8499:2003 Knitted fabrics – Description of defects – Vocabulary
ISO 8501 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness
- ISO 8501-1:2007 Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
- ISO 8501-2:1994 Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
- ISO 8501-3:2006 Part 3: Preparation grades of welds, edges and other areas with surface imperfections
- ISO 8501-4:2006 Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
ISO 8502 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness
- ISO 8502-2:2017 Part 2: Laboratory determination of chloride on cleaned surfaces
- ISO 8502-3:2017 Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
- ISO 8502-4:2017 Part 4: Guidance on the estimation of the probability of condensation prior to paint application
- ISO 8502-5:1998 Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method
- ISO 8502-6:2006 Part 6: Extraction of soluble contaminants for analysis - The Bresle method
- ISO 8502-9:1998 Part 9: Field method for the conductometric determination of water-soluble salts
- ISO 8502-11:2006 Part 11: Field method for the turbidimetric determination of water-soluble sulfate
ISO 8503 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates
- ISO 8503-1:2012 Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
- ISO 8503-2:2012 Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure
- ISO 8503-3:2012 Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure
- ISO 8503-4:2012 Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure
- ISO 8503-5:2017 Part 5: Replica tape method for the determination of the surface profile
ISO 8504 Preparation of steel substrates before application of paints and related products - Surface preparation methods
- ISO 8504-1:2000 Part 1: General principles
- ISO 8504-2:2000 Part 2: Abrasive blast-cleaning
- ISO 8504-3:1993 Part 3: Hand- and power-tool cleaning
ISO 8512 Surface plates
- ISO 8512-1:1990 Part 1: Cast iron
- ISO 8512-2:1990 Part 2: Granite
ISO/TR 8517:1988 Rubber- or plastics-covered rollers – Glossary
ISO 8525:2008 Airborne noise emitted by machine tools – Operating conditions for metal-cutting machines
ISO 8528 Reciprocating internal combustion engine driven alternating current generating sets
- ISO 8528-1:2005 Part 1: Application, ratings and performance
- ISO 8528-2:2005 Part 2: Engines
- ISO 8528-3:2005 Part 3: Alternating current generators for generating sets
- ISO 8528-4:2005 Part 4: Controlgear and switchgear
- ISO 8528-5:2013 Part 5: Generating sets
- ISO 8528-6:2005 Part 6: Test methods
- ISO 8528-7:2017 Part 7: Technical declarations for specification and design
- ISO 8528-8:2016 Part 8: Requirements and tests for low-power generating sets
- ISO 8528-9:2017 Part 9: Measurement and evaluation of mechanical vibrations
- ISO 8528-10:1998 Part 10: Measurement of airborne noise by the enveloping surface method
- ISO 8528-12:1997 Part 12: Emergency power supply to safety services
- ISO 8528-13:2016 Part 13: Safety
ISO 8529 Reference neutron radiations
- ISO 8529-1:2001 Part 1: Characteristics and methods of production
- ISO 8529-2:2000 Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field
- ISO 8529-3:1998 Part 3: Calibration of area and personal dosimeters and determination of response as a function of energy and angle of incidence
ISO 8532:1995 Securities – Format for transmission of certificate numbers
ISO 8536 Infusion equipment for medical use
- ISO 8536-1:2011 Part 1: Infusion glass bottles
- ISO 8536-2:2010 Part 2: Closures for infusion bottles
- ISO 8536-3:2009 Part 3: Aluminium caps for infusion bottles
- ISO 8536-4:2010 Part 4: Infusion sets for single use, gravity feed
- ISO 8536-5:2004 Part 5: Burette infusion sets for single use, gravity feed
- ISO 8536-6:2016 Part 6: Freeze drying closures for infusion bottles
- ISO 8536-7:2009 Part 7: Caps made of aluminium-plastics combinations for infusion bottles
- ISO 8536-8:2015 Part 8: Infusion sets for single use with pressure infusion apparatus
- ISO 8536-9:2015 Part 9: Fluid lines for single use with pressure infusion equipment
- ISO 8536-10:2015 Part 10: Accessories for fluid lines for single use with pressure infusion equipment
- ISO 8536-11:2015 Part 11: Infusion filters for single use with pressure infusion equipment
- ISO 8536-12:2007 Part 12: Check valves
- ISO 8536-13:2016 Part 13: Graduated flow regulators for single use with fluid contact
- ISO 8536-14:2016 Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact
ISO 8537:2016 Sterile single-use syringes, with or without needle, for insulin
ISO 8540:1993 Open front mechanical power presses - Vocabulary
ISO 8548 Prosthetics and orthotics – Limb deficiencies
- ISO 8548-1:1989 Part 1: Method of describing limb deficiencies present at birth
- ISO 8548-2:1993 Part 2: Method of describing lower limb amputation stumps
- ISO 8548-3:1993 Part 3: Method of describing upper limb amputation stumps
- ISO 8548-4:1998 Part 4: Description of causal conditions leading to amputation
- ISO 8548-5:2003 Part 5: Description of the clinical condition of the person who has had an amputation
ISO 8549 Prosthetics and orthotics - Vocabulary
- ISO 8549-1:1989 Part 1: General terms for external limb prostheses and external orthoses
- ISO 8549-2:1989 Part 2: Terms relating to external limb prostheses and wearers of these prostheses
- ISO 8549-3:1989 Part 3: Terms relating to external orthoses
- ISO 8549-4:2014 Part 4: Terms relating to limb amputation
ISO/TR 8550 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots
- ISO/TR 8550-1:2007 Part 1: Acceptance sampling
- ISO/TR 8550-2:2007 Part 2: Sampling by attributes
- ISO/TR 8550-3:2007 Part 3: Sampling by variables
ISO 8551:2003 Prosthetics and orthotics – Functional deficiencies – Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis
ISO 8552:2004 Milk – Estimation of psychrotrophic microorganisms – Colony-count technique at 21 degrees C (Rapid method)
ISO 8553:2004 Milk – Enumeration of microorganisms – Plate-loop technique at 30 degrees C
ISO 8559:1989 Garment construction and anthropometric surveys – Body dimensions [Withdrawn: replaced by ISO 8559-1:2017]
ISO 8559 Size designation of clothes
- ISO 8559-1:2017 Part 1: Anthropometric definitions for body measurement
- ISO 8559-2:2017 Part 2: Primary and secondary dimension indicators
ISO 8560:1986 Technical drawings – Construction drawings – Representation of modular sizes, lines and grids
ISO 8568:2007 Mechanical shock – Testing machines – Characteristics and performance
ISO 8571 Information processing systems - Open Systems Interconnection - File Transfer, Access and Management
- ISO 8571-1:1988 Part 1: General introduction
- ISO 8571-2:1988 Part 2: Virtual Filestore Definition
- ISO 8571-3:1988 Part 3: File Service Definition
- ISO 8571-4:1988 Part 4: File Protocol Specification
- ISO/IEC 8571-5:1990 Part 5: Protocol Implementation Conformance Statement Proforma
ISO 8573 Compressed air
- ISO 8573-1:2010 Contaminants and purity classes
- ISO 8573-2:2007 Test methods for oil aerosol content
- ISO 8573-3:1999 Test methods for measurement of humidity
- ISO 8573-4:2001 Test methods for solid particle content
- ISO 8573-5:2001 Test methods for oil vapour and organic solvent content
- ISO 8573-6:2003 Test methods for gaseous contaminant content
- ISO 8573-7:2003 Test method for viable microbiological contaminant content
- ISO 8573-8:2004 Test methods for solid particle content by mass concentration
- ISO 8573-9:2004 Test methods for liquid water content
ISO 8579 Acceptance code for gear units
- ISO 8579-1:2002 Part 1: Test code for airborne sound
ISO 8583 Financial transaction card originated messages – Interchange message specifications
ISO 8586:2012 Sensory analysis – General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors
ISO 8596:2009 Ophthalmic optics – Visual acuity testing – Standard optotype and its presentation
ISO 8598 Optics and optical instruments – Focimeters
- ISO 8598-1:2014 Part 1: General purpose instruments
ISO 8600 Endoscopes – Medical endoscopes and endotherapy devices^{[Note 3]}
- ISO 8600-1:2015 Part 1: General requirements
- ISO 8600-2:2015 Part 2: Particular requirements for rigid bronchoscopes
- ISO 8600-3:1997 Part 3: Determination of field of view and direction of view of endoscopes with optics
- ISO 8600-4:2014 Part 4: Determination of maximum width of insertion portion
- ISO 8600-5:2005 Part 5: Determination of optical resolution of rigid endoscopes with optics
- ISO 8600-6:2005 Part 6: Vocabulary
- ISO 8600-7:2012 Part 7: Basic requirements for medical endoscopes of water-resistant type
ISO 8601:2004 Data elements and interchange formats – Information interchange – Representation of dates and times
ISO/IEC 8602:1995 Information technology – Protocol for providing the OSI connectionless-mode transport service
ISO 8604:1988 Plastics – Prepregs – Definitions of terms and symbols for designations
ISO 8608:2016 Mechanical vibration – Road surface profiles – Reporting of measured data
ISO 8612:2009 Ophthalmic instruments – Tonometers
ISO/IEC 8613 Information technology – Open Document Architecture (ODA) and interchange format
ISO 8614:1997 Ski bindings – Vocabulary
ISO 8615:1991 Implants for surgery – Fixation devices for use in the ends of the femur in adults
ISO 8624:2011 Ophthalmic optics – Spectacle frames – Measuring system and terminology
ISO 8625 Aerospace – Fluid systems – Vocabulary
- ISO 8625-1:1993 Part 1: General terms and definitions related to pressure
- ISO 8625-2:1991 Part 2: General terms and definitions relating to flow
- ISO 8625-3:1991 Part 3: General terms and definitions relating to temperature
- ISO 8625-4:2011 Part 4: General terms and definitions relating to control/actuation systems
ISO 8626:1989 Servo-hydraulic test equipment for generating vibration – Method of describing characteristics
ISO 8630 Information processing – Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side
- ISO 8630-1:1987 Part 1: Dimensional, physical and magnetic characteristics
- ISO 8630-2:1987 Part 2: Track format A for 77 tracks
- ISO 8630-3:1987 Part 3: Track format B for 80 tracks
ISO/IEC 8631:1989 Information technology - Program constructs and conventions for their representation
ISO/IEC 8632 Information technology – Computer graphics – Metafile for the storage and transfer of picture description information
- ISO/IEC 8632-1:1999 Part 1: Functional specification
- ISO/IEC 8632-2:1992 Part 2: Character encoding [withdrawn 2001-06-21]
- ISO/IEC 8632-3:1999 Part 3: Binary encoding
- ISO/IEC 8632-4:1999 Part 4: Clear text encoding
ISO 8637:2010 Cardiovascular implants and extracorporeal systems – Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
ISO 8638:2010 Cardiovascular implants and extracorporeal systems – Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters
ISO 8640 Textile machinery and accessories – Flat warp knitting machines^{[Note 3]}
- ISO 8640-1:2004 Part 1: Vocabulary of basic structure and knitting elements
- ISO 8640-2:2004 Part 2: Vocabulary of warp let-off, fabric take-up and batching
- ISO 8640-3:2002 Part 3: Vocabulary of patterning devices
- ISO 8640-4:1996 Part 4: Stitch bonding machines and stitch bonding devices
ISO 8648:1988 Information processing systems – Open Systems Interconnection – Internal organization of the Network Layer
ISO/IEC 8650 Information technology – Open Systems Interconnection – Protocol specification for the Association Control Service Element
- ISO/IEC 8650-2:1997 Protocol Implementation Conformance Statement (PICS) proforma
ISO 8651 Information technology – Computer graphics – Graphical Kernel System (GKS) language bindings^{[Note 3]}
- ISO 8651-1:1988 Part 1: FORTRAN
- ISO 8651-2:1988 Part 2: Pascal
- ISO 8651-3:1988 Part 3: Ada
- ISO/IEC 8651-4:1995 Part 4: C
ISO/IEC 8652:2012 Information technology – Programming languages – Ada
ISO 8653:1986 Jewellery – Ring-sizes – Definition, measurement and designation
ISO 8655 Piston-operated volumetric apparatus
- ISO 8655-1:2002 Part 1: Terminology, general requirements and user recommendations
- ISO 8655-2:2002 Part 2: Piston pipettes
- ISO 8655-3:2002 Part 3: Piston burettes
- ISO 8655-4:2002 Part 4: Dilutors
- ISO 8655-5:2002 Part 5: Dispensers
- ISO 8655-6:2002 Part 6: Gravimetric methods for the determination of measurement error
- ISO 8655-7:2005 Part 7: Non-gravimetric methods for the assessment of equipment performance
ISO 8669 Urine collection bags
- ISO 8669-1:1988 Part 1: Vocabulary
ISO 8670 Ostomy collection bags
- ISO 8670-1:1988 Part 1: Vocabulary
ISO 8691 Petroleum products – Low levels of vanadium in liquid fuels – Determination by flameless atomic absorption spectrometry after ashing
ISO 8695:2010 Tools for pressing - Punches - Nomenclature and terminology
ISO/TR 8713:2012 Electrically propelled road vehicles – Vocabulary
ISO 8769:2016 Reference sources - Calibration of surface contamination monitors - Alpha-, beta- and photon emitters
ISO 8777:1993 Information and documentation - Commands for interactive text searching
ISO 8784 Pulp, paper and board – Microbiological examination
- ISO 8784-1:2014 Part 1: Enumeration of bacteria and bacterial spores based on disintegration
ISO 8785:1998 Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters
ISO 8790:1987 Information processing systems - Computer system configuration diagram symbols and conventions
ISO/IEC 8802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Specific requirements
- ISO/IEC/IEEE 8802-A:2015 Part A: Overview and architecture
- ISO/IEC TR 8802-1:2001 Part 1: Overview of Local Area Network Standards
- ISO/IEC/IEEE 8802-1Q:2016 Part 1Q: Bridges and bridged networks
- ISO/IEC/IEEE 8802-1X:2013 Part 1X: Port-based network access control
- ISO/IEC/IEEE 8802-1AB:2017 Part 1AB: Station and media access control connectivity discovery
- ISO/IEC/IEEE 8802-1AE:2013 Part 1AE: Media access control (MAC) security
- ISO/IEC/IEEE 8802-1AR:2014 Part 1AR: Secure device identity
- ISO/IEC/IEEE 8802-1AS:2014 Part 1AS: Timing and synchronization for time-sensitive applications in bridged local area networks
- ISO/IEC/IEEE 8802-1AX:2016 Part 1AX: Link aggregation
- ISO/IEC/IEEE 8802-1BA:2016 Part 1BA: Audio video bridging (AVB) systems
- ISO/IEC/IEEE 8802-1BR:2016 Part 1BR: Virtual bridged local area networks – Bridge port extension
- ISO/IEC 8802-2:1998 Part 2: Logical link control
- ISO/IEC/IEEE 8802-3:2017 Part 3: Standard for Ethernet
- ISO/IEC/IEEE 8802-3-1:2015 Part 3-1: Standard for management information base (MIB) – Definitions for Ethernet
- ISO/IEC 8802-5:1998 Part 5: Token ring access method and physical layer specifications
- ISO/IEC/IEEE 8802-11:2012 Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
- ISO/IEC/IEEE 8802-15-4:2010 Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs)
- ISO/IEC/IEEE 8802-22:2015 Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands
ISO 8805 Information processing systems – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) functional description
ISO/IEC 8806 Information technology – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) language bindings
- ISO/IEC 8806-4 Part 4: C
ISO 8807:1989 Information processing systems – Open Systems Interconnection – LOTOS – A formal description technique based on the temporal ordering of observational behaviour
ISO 8811:2000 Earth-moving machinery – Rollers and compactors – Terminology and commercial specifications
ISO 8812:2016 Earth-moving machinery – Backhoe loaders – Terminology and commercial specifications
ISO 8815:1994 Aircraft – Electrical cables and cable harnesses – Vocabulary
ISO/IEC 8822:1994 Information technology – Open Systems Interconnection – Presentation service definition
ISO/IEC 8823 Information technology – Open Systems Interconnection – Connection-oriented presentation protocol
- ISO/IEC 8823-1:1994 Protocol specification
- ISO/IEC 8823-2:1997 Protocol Implementation Conformance Statement (PICS) proforma
ISO/IEC 8824 Information technology – Abstract Syntax Notation One (ASN.1)
- ISO/IEC 8824-1:2015 Specification of basic notation
- ISO/IEC 8824-2:2015 Information object specification
- ISO/IEC 8824-3:2015 Constraint specification
- ISO/IEC 8824-4:2015 Parameterization of ASN.1 specifications
ISO/IEC 8825 Information technology – ASN.1 encoding rules
- ISO/IEC 8825-1:2015 Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER)
- ISO/IEC 8825-2:2015 Specification of Packed Encoding Rules (PER)
- ISO/IEC 8825-3:2015 Specification of Encoding Control Notation (ECN)
- ISO/IEC 8825-4:2015 XML Encoding Rules (XER)
- ISO/IEC 8825-5:2015 Mapping W3C XML schema definitions into ASN.1
- ISO/IEC 8825-6:2015 Registration and application of PER encoding instructions
- ISO/IEC 8825-7:2015 Part 7: Specification of Octet Encoding Rules (OER)
ISO 8826 Technical drawings – Rolling bearings
- ISO 8826-1:1989 Part 1: General simplified representation
- ISO 8826-2:1994 Part 2: Detailed simplified representation
ISO 8827:1988 Implants for surgery – Staples with parallel legs for orthopaedic use – General requirements
ISO 8828:2014 Implants for surgery – Guidance on care and handling of orthopaedic implants
ISO 8835 Inhalational anaesthesia systems
- ISO 8835-7:2011 Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases
ISO 8836:2014 Suction catheters for use in the respiratory tract
ISO 8843:2005 Aircraft – Crimp-removable contacts for electrical connectors – Identification system
ISO 8855:2011 Road vehicles – Vehicle dynamics and road-holding ability – Vocabulary
ISO/IEC 8859 Information technology – 8-bit single-byte coded graphic character sets
- ISO/IEC 8859-1:1998 Part 1: Latin alphabet No. 1
- ISO/IEC 8859-2:1999 Part 2: Latin alphabet No. 2
- ISO/IEC 8859-3:1999 Part 3: Latin alphabet No. 3
- ISO/IEC 8859-4:1998 Part 4: Latin alphabet No. 4
- ISO/IEC 8859-5:1999 Part 5: Latin/Cyrillic alphabet
- ISO/IEC 8859-6:1999 Part 6: Latin/Arabic alphabet
- ISO/IEC 8859-7:2003 Part 7: Latin/Greek alphabet
- ISO/IEC 8859-8:1999 Part 8: Latin/Hebrew alphabet
- ISO/IEC 8859-9:1999 Part 9: Latin alphabet No. 5
- ISO/IEC 8859-10:1998 Part 10: Latin alphabet No. 6
- ISO/IEC 8859-11:2001 Part 11: Latin/Thai alphabet
- ISO/IEC 8859-13:1998 Part 13: Latin alphabet No. 7
- ISO/IEC 8859-14:1998 Part 14: Latin alphabet No. 8 (Celtic)
- ISO/IEC 8859-15:1999 Part 15: Latin alphabet No. 9
- ISO/IEC 8859-16:2001 Part 16: Latin alphabet No. 10
ISO 8860 Information processing – Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on 80 tracks on each side
- ISO 8860-1:1987 Part 1: Dimensional, physical and magnetic characteristics
- ISO 8860-2:1987 Part 2: Track format
ISO 8871 Elastomeric parts for parenterals and for devices for pharmaceutical use
- ISO 8871-1:2003 Part 1: Extractables in aqueous autoclavates
- ISO 8871-2:2003 Part 2: Identification and characterization
- ISO 8871-3:2003 Part 3: Determination of released-particle count
- ISO 8871-4:2006 Part 4: Biological requirements and test methods
- ISO 8871-5:2016 Part 5: Functional requirements and testing
ISO 8872:2003 Aluminium caps for transfusion, infusion and injection bottles – General requirements and test methods
ISO/IEC 8877:1992 Information technology – Telecommunications and information exchange between systems – Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T
ISO/IEC 8878:1992 Information technology – Telecommunications and information exchange between systems – Use of X.25 to provide the OSI Connection-mode Network Service
ISO 8879:1986 Information processing – Text and office systems – Standard Generalized Markup Language (SGML)
ISO/IEC 8881:1989 Information processing systems – Data communications – Use of the X.25 packet level protocol in local area networks
ISO/IEC 8882 Information technology – Telecommunications and information exchange between systems – X.25 DTE conformance testing
- ISO/IEC 8882-1:1996 Part 1: General principles
- ISO/IEC 8882-2:2000 Part 2: Data link layer conformance test suite
- ISO/IEC 8882-3:2000 Part 3: Packet layer conformance test suite
ISO/IEC 8886:1996 Information technology – Open Systems Interconnection – Data link service definition
ISO 8887 Technical product documentation – Design for manufacturing, assembling, disassembling and end-of-life processing
- ISO 8887-1:2017 Part 1: General concepts and requirements
ISO 8909 Forage harvesters
- ISO 8909-1:1994 Part 1: Vocabulary
ISO 8910:1993 Machinery and equipment for working the soil – Mouldboard plough working elements – Vocabulary
ISO 8927:1991 Earth-moving machinery – Machine availability – Vocabulary
ISO 8930:1987 General principles on reliability for structures – List of equivalent terms
ISO 8936:2017 Awnings for leisure accommodation vehicles - Requirements and test methods
ISO 8954 Ferroalloys - Vocabulary
- ISO 8954-1:1990 Part 1: Materials
- ISO 8954-2:1990 Part 2: Sampling and sample preparation
- ISO 8954-3:1990 Part 3: Sieve analysis
ISO 8957:1996 Information and documentation - Hebrew alphabet coded character sets for bibliographic information interchange
ISO 8965:2013 Logging industry – Technology – Terms and definitions
ISO 8979:2004 Pliers and nippers for electronics - Nomenclature
ISO 8980 Ophthalmic optics – Uncut finished spectacle lenses
- ISO 8980-1:2017 Part 1: Specifications for single-vision and multifocal lenses
- ISO 8980-2:2017 Part 2: Specifications for power-variation lenses
- ISO 8980-3:2013 Part 3: Transmittance specifications and test methods
- ISO 8980-4:2006 Part 4: Specifications and test methods for anti-reflective coatings
- ISO 8980-5:2005 Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
ISO 8999:2001 Reciprocating internal combustion engines - Graphical symbols

ISO 9000 – ISO 9999

ISO 9000:2015 Quality management systems – Fundamentals and vocabulary
ISO 9001:2015 Quality management systems – Requirements
ISO/TS 9002:2016 Quality management systems – Guidelines for the application of ISO 9001:2015
ISO 9004:2009 Managing for the sustained success of an organization – A quality management approach
ISO/TR 9007:1987 Information processing systems - Concepts and terminology for the conceptual schema and the information base
ISO 9019:1995 Securities – Numbering of certificates
ISO 9022 Optics and optical instruments - Environmental test methods
- ISO 9022-1:2016 Definitions, extent of testing
- ISO 9022-2:2015 Cold, heat and humidity
- ISO 9022-3:2015 Mechanical stress
- ISO 9022-4:2014 Salt mist
- ISO 9022-5:1994 Combined cold, low air pressure [Withdrawn: replaced by ISO 9022-23:2016]
- ISO 9022-6:2015 Dust
- ISO 9022-23:2016 Low pressure combined with cold, ambient temperature and dry or damp heat
ISO 9031:1987 Air cargo equipment - Handling systems for unit load devices (ULDs) - Symbols for pictorial representation
ISO 9036:1987 Information processing - Arabic 7-bit coded character set for information interchange
ISO/IEC 9040:1997 Information technology – Open Systems Interconnection – Virtual Terminal Basic Class Service
ISO/IEC 9041 Information technology – Open Systems Interconnection – Virtual Terminal Basic Class Protocol
- ISO/IEC 9041-1:1997 Part 1: Specification
- ISO/IEC 9041-2:1997 Part 2: Protocol Implementation Conformance Statement (PICS) proforma
ISO 9045:1990 Industrial screens and screening – Vocabulary
ISO 9050 Glass in building – Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
ISO 9060: Solar energy -- Specification and classification of instruments for measuring hemispherical solar and direct solar radiation
ISO/IEC 9066 Information technology – Open Systems Interconnection – Reliable Transfer^{[Note 3]}
- ISO/IEC 9066-1:1989 Part 1: Model and service definition
- ISO/IEC 9066-2:1989 Part 2: Protocol specification
- ISO/IEC 9066-3:1996 Protocol Implementation Conformance Statement (PICS) proforma
ISO 9069:1988 Information processing – SGML support facilities – SGML Document Interchange Format (SDIF)
ISO/IEC 9070:1991 Information technology - SGML support facilities - Registration procedures for public text owner identifiers
ISO/IEC 9072 Information technology – Open Systems Interconnection – Remote Operations^{[Note 3]}
- ISO/IEC 9072-1:1989 Part 1: Model, notation and service definition
- ISO/IEC 9072-2:1989 Part 2: Protocol specification
- ISO/IEC 9072-3:1996 Protocol Implementation Conformance Statement (PICS) proforma
ISO/IEC 9075 Information technology – Database languages – SQL
ISO 9086 Wood – Methods of physical and mechanical testing – Vocabulary
- ISO 9086-1:1987 Part 1: General concepts and macrostructure
ISO 9092:2011 Textiles – Nonwovens – Definition
ISO 9095:1990 Steel tubes – Continuous character marking and colour coding for material identification
ISO 9123:2001 Measurement of liquid flow in open channels – Stage-fall-discharge relationships
ISO/IEC 9126 Software engineering – Product quality
ISO 9128:2006 Road vehicles - Graphical symbols to designate brake fluid types
ISO 9141 Road vehicles – Diagnostic systems^{[Note 3]}
- ISO 9141-2 CARB requirements for interchange of digital information
- ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool
ISO 9144:1991 Securities – Optical character recognition line – Position and structure
ISO 9160:1988 Information processing - Data encipherment - Physical layer interoperability requirements
ISO 9170 Terminal units for medical gas pipeline systems
- ISO 9170-1:2017 Part 1: Terminal units for use with compressed medical gases and vacuum
- ISO 9170-2:2008 Part 2: Terminal units for anaesthetic gas scavenging systems
ISO/IEC 9171 Information technology - 130 mm optical disk cartridge, write once, for information interchange
- ISO/IEC 9171-1:1990 Part 1: Unrecorded optical disk cartridge
- ISO/IEC 9171-2:1990 Part 2: Recording format
ISO 9175 Tubular tips for hand-held technical pens using India ink on tracing paper
- ISO 9175-1:1988 Part 1: Definitions, dimensions, designation and marking
ISO 9177 Mechanical pencils for technical drawings^{[Note 3]}
- ISO 9177-1:2016 Part 1: Classification, dimensions, performance requirements and testing
- ISO 9177-2:1989 Part 2: Black leads – Classification and dimensions
- ISO 9177-3:1994 Part 3: Black leads – Bending strengths of HB leads
ISO 9180:1988 Black leads for wood-cased pencils – Classification and diameters
ISO 9186 Graphical symbols - Test methods
- ISO 9186-1:2014 Part 1: Method for testing comprehensibility
- ISO 9186-2:2008 Part 2: Method for testing perceptual quality
- ISO 9186-3:2014 Part 3: Method for testing symbol referent association
ISO 9187 Injection equipment for medical use
- ISO 9187-1:2010 Part 1: Ampoules for injectables
- ISO 9187-2:2010 Part 2: One-point-cut (OPC) ampoules
ISO 9195:1992 Liquid flow measurement in open channels – Sampling and analysis of gravel-bed material
ISO 9196:1992 Liquid flow measurement in open channels – Flow measurements under ice conditions
ISO 9211 Optics and photonics - Optical coatings
- ISO 9211-1:2010 Part 1: Definitions
ISO/TR 9212:2015 Hydrometry – Methods of measurement of bedload discharge
ISO 9222 Technical drawings – Seals for dynamic application
- ISO 9222-1:1989 Part 1: General simplified representation
- ISO 9222-2:1989 Part 2: Detailed simplified representation
ISO 9223 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation
ISO 9224 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
ISO 9225 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres
ISO 9226 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
ISO 9227:2017 Corrosion tests in artificial atmospheres – Salt spray tests
ISO 9229:2007 Thermal insulation - Vocabulary
ISO 9230:2007 Information and documentation - Determination of price indexes for print and electronic media purchased by libraries
ISO 9232:2003 Yogurt – Identification of characteristic microorganisms (Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus)
ISO 9235:2013 Aromatic natural raw materials – Vocabulary
ISO 9241 Ergonomics of human-system interaction
ISO 9244:2008 Earth-moving machinery - Machine safety labels - General principles
ISO 9245:1991 Earth-moving machinery – Machine productivity – Vocabulary, symbols and units
ISO 9247:1990 Earth-moving machinery – Electrical wires and cables – Principles of identification and marking
ISO/TS 9250 Earth-moving machinery – Multilingual listing of equivalent terms
- ISO/TS 9250-1:2012 Part 1: General
- ISO/TS 9250-2:2012 Part 2: Performance and dimensions
ISO 9251:1987 Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary
ISO 9264:1988 Woodworking machines – Narrow belt sanding machines with sliding table or frame – Nomenclature
ISO 9265:1988 Woodworking machines – Multi-spindle boring machines – Nomenclature
ISO 9266:1988 Woodworking machines – Universal tool and cutter sharpeners – Nomenclature
ISO 9267:1988 Woodworking machines – Bandsaw blade sharpening machines – Nomenclature
ISO 9268:1988 Implants for surgery – Metal bone screws with conical under-surface of head – Dimensions
ISO 9269:1988 Implants for surgery – Metal bone plates – Holes and slots corresponding to screws with conical under-surface
ISO/IEC 9281 Information technology - Picture coding methods
- ISO/IEC 9281-1:1990 Part 1: Identification
- ISO/IEC 9281-2:1990 Part 2: Procedure for registration
ISO/IEC 9282 Information processing - Coded representation of pictures
- ISO/IEC 9282-1:1988 Part 1: Encoding principles for picture representation in a 7-bit or 8-bit environment
ISO 9288:1989 Thermal insulation – Heat transfer by radiation – Physical quantities and definitions
ISO/IEC 9293:1994 Information technology – Volume and file structure of disk cartridges for information interchange
ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment
ISO 9296:2017 Acoustics - Declared noise emission values of information technology and telecommunications equipment
ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles
ISO 9308 Water quality – Enumeration of Escherichia coli and coliform bacteria^{[Note 3]}
- ISO 9308-1:2014 Part 1: Membrane filtration method for waters with low bacterial background flora
- ISO 9308-2:2012 Part 2: Most probable number method
- ISO 9308-3:1998 Part 3: Miniaturized method (Most Probable Number) for the detection and enumeration of E. coli in surface and waste water
ISO 9314 Information processing systems Fibre Distributed Data Interface (FDDI)
- ISO 9314-1:1989 Part 1: Token Ring Physical Layer Protocol (PHY)
- ISO 9314-2:1989 Part 2: Token Ring Media Access Control (MAC)
- ISO/IEC 9314-3:1990 Part 3: Physical Layer Medium Dependent (PMD)
- ISO/IEC 9314-4:1999 Part 4: Single Mode Fibre Physical Layer Medium Dependent (SMF-PMD)
- ISO/IEC 9314-5:1995 Part 5: Hybrid Ring Control (HRC)
- ISO/IEC 9314-6:1998 Part 6: Station Management (SMT)
- ISO/IEC 9314-7:1998 Part 7: Physical layer Protocol (PHY-2)
- ISO/IEC 9314-8:1998 Part 8: Media Access Control-2 (MAC-2)
- ISO/IEC 9314-9:2000 Part 9: Low-cost fibre physical layer medium dependent (LCF-PMD)
- ISO/IEC 9314-13:1998 Part 13: Conformance Test Protocol Implementation Conformance Statement (CT-PICS) Proforma
- ISO/IEC 9314-20:2001 Part 20: Abstract test suite for FDDI physical medium dependent conformance testing (FDDI PMD ATS)
- ISO/IEC 9314-21:2000 Part 21: Abstract test suite for FDDI physical layer protocol conformance testing (FDDI PHY ATS)
- ISO/IEC 9314-25:1998 Part 25: Abstract test suite for FDDI - Station Management Conformance Testing (SMT-ATS)
- ISO/IEC 9314-26:2001 Part 26: Media Access Control Conformance Testing (MAC-ATS)
ISO 9315:1989 Information processing systems - Interface between flexible disk cartridge drives and their host controllers
ISO/IEC 9316:1995 Information technology - Small Computer System Interface-2
- ISO/IEC 9316-2:2000 Information technology - Small computer system interface-2 (SCSI-2) - Part 2: Common Access Method (CAM) Transport and SCSI interface module
ISO/IEC 9318 Information technology - Intelligent Peripheral Interface
- ISO/IEC 9318-2:1990 Part 2: Device specific command set for magnetic disk drives
- ISO/IEC 9318-3:1990 Part 3: Device generic command set for magnetic and optical disk drives
- ISO/IEC 9318-4:2002 Part 4: Device generic command set for magnetic tape drives (IPI-3 tape)
ISO 9334:2012 Optics and photonics - Optical transfer function - Definitions and mathematical relationships
ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
ISO 9342 Optics and optical instruments – Test lenses for calibration of focimeters
- ISO 9342-1:2005 Part 1: Test lenses for focimeters used for measuring spectacle lenses
- ISO 9342-2:2005 Part 2: Test lenses for focimeters used for measuring contact lenses
ISO 9346:2007 Hygrothermal performance of buildings and building materials – Physical quantities for mass transfer – Vocabulary
ISO 9360 Anaesthetic and respiratory equipment – Heat and moisture exchangers (HMEs) for humidifying respired gases in humans
- ISO 9360-1:2000 Part 1: HMEs for use with minimum tidal volumes of 250 ml
- ISO 9360-2:2001 Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
ISO 9362:2014 Banking – Banking telecommunication messages – Business identifier code (BIC)
ISO 9368 Measurement of liquid flow in closed conduits by the weighing method – Procedures for checking installations
- ISO 9368-1:1990 Part 1: Static weighing systems
ISO 9394:2012 Ophthalmic optics – Contact lenses and contact lens care products – Determination of biocompatibility by ocular study with rabbit eyes
ISO 9407 Shoe sizes – Mondopoint system of sizing and marking
ISO 9431:1990 Construction drawings – Spaces for drawing and for text, and title blocks on drawing sheets
ISO/TR 9464:2008 Guidelines for the use of ISO 5167:2003
ISO 9488:1999 Solar energy - Vocabulary
ISO 9493:2010 Geometrical product specifications (GPS) – Dimensional measuring equipment: Dial test indicators (lever type) – Design and metrological characteristics
ISO/IEC 9496:2003 CHILL - The ITU-T programming language
ISO 9506 Industrial automation systems - Manufacturing Message Specification
ISO/IEC 9529 Information processing systems - Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side
- ISO/IEC 9529-1:1989 Part 1: Dimensional, physical and magnetic characteristics
- ISO/IEC 9529-2:1989 Part 2: Track format
ISO/IEC 9541 Information technology – Font information interchange
- ISO/IEC 9541-1:2012 Part 1: Architecture
- ISO/IEC 9541-2:2012 Part 2: Interchange Format
- ISO/IEC 9541-3:2012 Part 3: Glyph shape representation
- ISO/IEC 9541-4:2009 Part 4: Harmonization to Open Font Format
ISO 9542:1988 Information processing systems – Telecommunications and information exchange between systems – End system to Intermediate system routeing exchange protocol for use in conjunction with the Protocol for providing the connectionless-mode network service (ISO 8473)
ISO 9543:1989 Information processing systems – Information exchange between systems – Synchronous transmission signal quality at DTE/DCE interfaces
ISO/IEC 9545:1994 Information technology – Open Systems Interconnection – Application Layer structure
ISO/TR 9547:1988 Programming language processors - Test methods - Guidelines for their development and acceptability
ISO/IEC 9548 Information technology – Open Systems Interconnection – Connectionless Session protocol
- ISO/IEC 9548-1:1996 Protocol specification
- ISO/IEC 9548-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
ISO/IEC 9549:1990 Information technology – Galvanic isolation of balanced interchange circuit
ISO 9555 Measurement of liquid flow in open channels – Tracer dilution methods for the measurement of steady flow
- ISO 9555-1:1994 Part 1: General
- ISO 9555-3:1992 Part 3: Chemical tracers
- ISO 9555-4:1992 Part 4: Fluorescent tracers
ISO 9564 Financial services – Personal Identification Number (PIN) management and security
ISO 9568:1993 Cinematography – Background acoustic noise levels in theatres, review rooms and dubbing rooms
ISO/IEC TR 9573:1988 Information processing - SGML support facilities - Techniques for using SGML
- ISO/IEC TR 9573-11:2004 Part 11: Structure descriptions and style specifications for standards document interchange
- ISO/IEC TR 9573-13:1991 Part 13: Public entity sets for mathematics and science
ISO/IEC 9574:1992 Information technology – Provision of the OSI connection-mode network service by packet mode terminal equipment to an integrated services digital network (ISDN)
ISO/IEC TR 9575:1995 Information technology – Telecommunications and information exchange between systems – OSI Routeing Framework
ISO/IEC 9576 Information technology – Open Systems Interconnection – Connectionless Presentation protocol
- ISO/IEC 9576-1:1995 Protocol specification
- ISO/IEC 9576-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
ISO/IEC TR 9577:1999 Information technology – Protocol identification in the network layer
ISO/IEC TR 9578:1990 Information technology – Communication interface connectors used in local area networks
ISO/IEC 9579:2000 Information technology – Remote database access for SQL with security enhancement
ISO 9583:1993 Implants for surgery – Non-destructive testing – Liquid penetrant inspection of metallic surgical implants
ISO 9584:1993 Implants for surgery – Non-destructive testing – Radiographic examination of cast metallic surgical implants
ISO 9585:1990 Implants for surgery – Determination of bending strength and stiffness of bone plates
ISO/IEC 9592 Information technology – Computer graphics and image processing – Programmer's Hierarchical Interactive Graphics System (PHIGS)
ISO/IEC 9593 Information technology – Computer graphics – Programmer's Hierarchical Interactive Graphics System (PHIGS) language bindings^{[Note 3]}
ISO/IEC 9594 Information technology – Open Systems Interconnection – The Directory
- ISO/IEC 9594-1:2017 Part 1: Overview of concepts, models and services
- ISO/IEC 9594-2:2017 Part 2: Models
- ISO/IEC 9594-3:2017 Part 3: Abstract service definition
- ISO/IEC 9594-4:2017 Part 4: Procedures for distributed operation
- ISO/IEC 9594-5:2017 Part 5: Protocol specifications
- ISO/IEC 9594-6:2017 Part 6: Selected attribute types
- ISO/IEC 9594-7:2017 Part 7: Selected object classes
- ISO/IEC 9594-8:2017 Part 8: Public-key and attribute certificate frameworks
- ISO/IEC 9594-9:2017 Part 9: Replication
ISO/IEC 9595:1998 Information technology – Open Systems Interconnection – Common management information service
ISO/IEC 9596 Information technology – Open Systems Interconnection – Common management information protocol
- ISO/IEC 9596-1:1998 Part 1: Specification
- ISO/IEC 9596-2:1993 Protocol Implementation Conformance Statement (PICS) proforma
ISO 9611:1996 Acoustics – Characterization of sources of structure-borne sound with respect to sound radiation from connected structures – Measurement of velocity at the contact points of machinery when resiliently mounted
ISO 9613 Acoustics – Attenuation of sound during propagation outdoors
- ISO 9613-1:1993 Part 1: Calculation of the absorption of sound by the atmosphere
- ISO 9613-2:1996 Part 2: General method of calculation
ISO 9614 Acoustics – Determination of sound power levels of noise sources using sound intensity
- ISO 9614-1:1993 Part 1: Measurement at discrete points
- ISO 9614-2:1996 Part 2: Measurement by scanning
- ISO 9614-3:2002 Part 3: Precision method for measurement by scanning
ISO 9626:2016 Stainless steel needle tubing for the manufacture of medical devices – Requirements and test methods
ISO/IEC 9636 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Functional specification
- ISO/IEC 9636-1:1991 Part 1: Overview, profiles, and conformance
- ISO/IEC 9636-2:1991 Part 2: Control
- ISO/IEC 9636-3:1991 Part 3: Output
- ISO/IEC 9636-4:1991 Part 4: Segments
- ISO/IEC 9636-5:1991 Part 5: Input and echoing
- ISO/IEC 9636-6:1991 Part 6: Raster
ISO/IEC 9637 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) – Data stream binding
- ISO/IEC 9637-1:1994 Part 1: Character encoding
- ISO/IEC 9637-2:1992 Part 2: Binary encoding
ISO/IEC 9638 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Language bindings
- ISO/IEC 9638-3:1994 Part 3: Ada
ISO 9645:1990 Acoustics – Measurement of noise emitted by two-wheeled mopeds in motion – Engineering method
ISO/IEC 9646 Information technology—Open Systems Interconnection—Conformance testing methodology and framework
- ISO/IEC 9646-1:1994 Part 1: General concepts
- ISO/IEC 9646-2:1994 Part 2: Abstract Test Suite specification
- ISO/IEC 9646-3:1998 Part 3: The Tree and Tabular Combined Notation (TTCN)
- ISO/IEC 9646-4:1994 Part 4: Test realization
- ISO/IEC 9646-5:1994 Part 5: Requirements on test laboratories and clients for the conformance assessment process
- ISO/IEC 9646-6:1994 Part 6: Protocol profile test specification
- ISO/IEC 9646-7:1995 Part 7: Implementation Conformance Statements
ISO 9660:1988 Information processing – Volume and file structure of CD-ROM for information interchange
ISO/IEC 9661:1994 Information technology – Data interchange on 12,7 mm wide magnetic tape cartridges – 18 tracks, 1 491 data bytes per millimetre
ISO 9662:1994 Aircraft equipment - Environmental and operating conditions for airborne equipment - Humidity, temperature and pressure tests
ISO 9687:2015 Dentistry - Graphical symbols for dental equipment
ISO 9688:1990 Mechanical vibration and shock – Analytical methods of assessing shock resistance of mechanical systems – Information exchange between suppliers and users of analyses
ISO 9696:2007 Water quality - Measurement of gross alpha activity in non-saline water - Thick source method
ISO 9706:1994 Information and documentation – Paper for documents – Requirements for permanence
ISO 9707:2008 Information and documentation - Statistics on the production and distribution of books, newspapers, periodicals and electronic publications
ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel
ISO 9713:2002 Neurosurgical implants – Self-closing intracranial aneurysm clips
ISO 9714 Orthopaedic drilling instruments
- ISO 9714-1:2012 Part 1: Drill bits, taps and countersink cutters
ISO 9735:1988 Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4, Syntax release number: 2)^{[Note 3]}
- ISO 9735-1:2002 Part 1: Syntax rules common to all parts
- ISO 9735-2:2002 Part 2: Syntax rules specific to batch EDI
- ISO 9735-3:2002 Part 3: Syntax rules specific to interactive EDI
- ISO 9735-4:2002 Part 4: Syntax and service report message for batch EDI (message type – CONTRL)
- ISO 9735-5:2002 Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)
- ISO 9735-6:2002 Part 6: Secure authentication and acknowledgement message (message type – AUTACK)
- ISO 9735-7:2002 Part 7: Security rules for batch EDI (confidentiality)
- ISO 9735-8:2002 Part 8: Associated data in EDI
- ISO 9735-9:2002 Part 9: Security key and certificate management message (message type – KEYMAN)
- ISO 9735-10:2014 Part 10: Syntax service directories
ISO/IEC 9796 Information technology – Security techniques – Digital signature schemes giving message recovery
- ISO/IEC 9796-2:2010 Part 2: Integer factorization based mechanisms
- ISO/IEC 9796-3:2006 Part 3: Discrete logarithm based mechanisms
ISO/IEC 9797 Information technology – Security techniques – Message Authentication Codes (MACs)
- ISO/IEC 9797-1:2011 Part 1: Mechanisms using a block cipher
- ISO/IEC 9797-2:2011 Part 2: Mechanisms using a dedicated hash-function
- ISO/IEC 9797-3:2011 Part 3: Mechanisms using a universal hash-function
ISO/IEC 9798 Information technology – Security techniques – Entity authentication
- ISO/IEC 9798-1:2010 Part 1: General
- ISO/IEC 9798-2:2008 Part 2: Mechanisms using symmetric encipherment algorithms
- ISO/IEC 9798-3:1998 Part 3: Mechanisms using digital signature
- ISO/IEC 9798-4:1999 Part 4: Mechanisms using a cryptographic check function
- ISO/IEC 9798-5:2009 Part 5: Mechanisms using zero-knowledge techniques
- ISO/IEC 9798-6:2010 Part 6: Mechanisms using manual data transfer
ISO 9801:2009 Ophthalmic instruments – Trial case lenses
ISO 9802:1996 Raw optical glass – Vocabulary
ISO/IEC 9804:1998 Information technology – Open Systems Interconnection – Service definition for the Commitment, Concurrency and Recovery service element
ISO/IEC 9805 Information technology – Open Systems Interconnection – Protocol for the Commitment, Concurrency and Recovery service element
- ISO/IEC 9805-1:1998 Protocol specification
- ISO/IEC 9805-2:1996 Protocol Implementation Conformance Statement (PICS) proforma
ISO/TR 9824:2007 Hydrometry – Measurement of free surface flow in closed conduits
ISO 9825:2005 Hydrometry – Field measurement of discharge in large rivers and rivers in flood
ISO 9826:1992 Measurement of liquid flow in open channels – Parshall and SANIIRI flumes
ISO 9827:1994 Measurement of liquid flow in open channels by weirs and flumes – Streamlined triangular profile weirs
ISO/IEC 9834 Information technology – Open Systems Interconnection – Procedures for the operation of OSI Registration Authorities
- ISO/IEC 9834-1:2012 General procedures and top arcs of the international object identifier tree
- ISO/IEC 9834-2:1993 Part 2: Registration procedures for OSI document types
- ISO/IEC 9834-3:2008 Registration of Object Identifier arcs beneath the top-level arc jointly administered by ISO and ITU-T
- ISO/IEC 9834-4:1991 Part 4: Register of VTE Profiles
- ISO/IEC 9834-5:1991 Part 5: Register of VT Control Object Definitions
- ISO/IEC 9834-6:2005 Registration of application processes and application entities
- ISO/IEC 9834-7:2008 Joint ISO and ITU-T Registration of International Organizations
- ISO/IEC 9834-8:2014 Part 8: Generation of universally unique identifiers (UUIDs) and their use in object identifiers
- ISO/IEC 9834-9:2008 Registration of object identifier arcs for applications and services using tag-based identification
ISO 9846 Solar energy -- Calibration of a pyranometer using a pyrheliometer
ISO 9847 Solar energy -- Calibration of field pyranometers by comparison to a reference pyranometer
ISO 9849:2017 Optics and optical instruments - Geodetic and surveying instruments - Vocabulary
ISO 9851:1990 Continuous mechanical handling equipment – Overhead electrical monorail conveyors – Definitions and safety rules
ISO 9869 Thermal insulation – Building elements – In-situ measurements of thermal resistance and thermal transmittance
ISO 9873:2017 Dentistry - Intra-oral mirrors
ISO 9878:1990 Micrographics - Graphical symbols for use in microfilming
ISO 9897:1997 Freight containers - Container equipment data exchange (CEDEX) - General communication codes
ISO/IEC 9899:2011 Programming languages – C
ISO 9902 Textile machinery – Noise test code
- ISO 9902-1:2001 Part 1: Common requirements
- ISO 9902-2:2001 Part 2: Spinning preparatory and spinning machinery
- ISO 9902-3:2001 Part 3: Nonwoven machinery
- ISO 9902-4:2001 Part 4: Yarn processing, cordage and rope manufacturing machinery
- ISO 9902-5:2001 Part 5: Weaving and knitting preparatory machinery
- ISO 9902-6:2001 Part 6: Fabric manufacturing machinery
- ISO 9902-7:2001 Part 7: Dyeing and finishing machinery
ISO 9926 Cranes – Training of operators^{[Note 3]}
- ISO 9926-1:1990 Part 1: General
- ISO 9926-3:2016 Part 3: Tower cranes
ISO/IEC/IEEE 9945:2009 Information technology – Portable Operating System Interface (POSIX®) Base Specifications, Issue 7
ISO 9947:2005 Textile machinery and accessories – Two-for-one twisters – Vocabulary
ISO 9949 Urine absorbing aids - Vocabulary
- ISO 9949-1:1993 Part 1: Conditions of urinary incontinence
- ISO 9949-2:1993 Part 2: Products
- ISO 9949-3:1993 Part 3: Identification of product types
ISO 9951:1993 Measurement of gas flow in closed conduits – Turbine meters
ISO 9957 Fluid draughting media
- ISO 9957-1:1992 Part 1: Water-based India ink – Requirements and test conditions
- ISO 9957-2:1995 Part 2: Water-based non-India ink – Requirements and test conditions
- ISO 9957-3:1997 Part 3: Water-based coloured draughting inks – Requirements and test conditions
ISO 9958 Draughting media for technical drawings – Draughting film with polyester base
- ISO 9958-1:1992 Part 1: Requirements and marking
- ISO 9958-2:1992 Part 2: Determination of properties
ISO 9959 Numerically controlled draughting machines – Drawing test for the evaluation of performance
- ISO 9959-1:1992 Part 1: Vector plotters
ISO 9960 Draughting instruments with or without graduation
- ISO 9960-1:1992 Part 1: Draughting scale rules
ISO 9961:1992 Draughting media for technical drawings – Natural tracing paper
ISO 9962 Manually operated draughting machines
- ISO 9962-1:1992 Part 1: Definitions, classification and designation
- ISO 9962-2:1992 Part 2: Characteristics, performance, inspection and marking
ISO/IEC 9973:2013 Information technology - Computer graphics, image processing and environmental data representation - Procedures for registration of items
ISO 9984:1996 Information and documentation – Transliteration of Georgian characters into Latin characters
ISO 9985:1996 Information and documentation – Transliteration of Armenian characters into Latin characters
ISO 9992 Financial transaction cards – Messages between the integrated circuit card and the card accepting device
ISO/IEC 9995 Information technology – Keyboard layouts for text and office systems
ISO 9997:1999 Dental cartridge syringes
ISO 9999 Assistive products for persons with disability – Classification and terminology

ISO 10000 – ISO 10999

ISO/IEC TR 10000 Information technology – Framework and taxonomy of International Standardized Profiles
- ISO/IEC TR 10000-1:1998 Part 1: General principles and documentation framework
- ISO/IEC TR 10000-2:1998 Part 2: Principles and Taxonomy for OSI Profiles
- ISO/IEC TR 10000-3:1998 Part 3: Principles and Taxonomy for Open System Environment Profiles
ISO 10001:2007 Quality management – Customer satisfaction – Guidelines for codes of conduct for organizations
ISO 10002:2014 Quality management – Customer satisfaction – Guidelines for complaints handling in organizations
ISO 10003:2007 Quality management – Customer satisfaction – Guidelines for dispute resolution external to organizations
ISO 10004:2008 Quality management – Customer satisfaction – Guidelines for monitoring and measuring
ISO 10005:2005 Quality management systems – Guidelines for quality plans
ISO 10006:2003 Quality management systems – Guidelines for quality management in projects
ISO 10007:2017 Quality management systems – Guidelines for configuration management
ISO 10008:2013 Quality management – Customer satisfaction – Guidelines for business-to-consumer electronic commerce transactions
ISO 10012:2003 Measurement management systems – Requirements for measurement processes and measuring equipment
ISO/TR 10013:2001 Guidelines for quality management system documentation
ISO 10014:2006 Quality management – Guidelines for realizing financial and economic benefits
ISO 10015:1999 Quality management – Guidelines for training
ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
ISO 10018:2012 Quality management – Guidelines on people involvement and competence
ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
ISO/IEC 10021 Information technology – Message Handling Systems (MHS)
ISO/IEC 10022:1996 Information technology – Open Systems Interconnection – Physical Service Definition
ISO/IEC 10026 Information technology – Open Systems Interconnection – Distributed Transaction Processing
- ISO/IEC 10026-1:1998 Part 1: OSI TP Model
- ISO/IEC 10026-2:1998 Part 2: OSI TP Service
- ISO/IEC 10026-3:1998 Part 3: Protocol specification
- ISO/IEC 10026-4:1995 Protocol Implementation Conformance Statement (PICS) proforma
- ISO/IEC 10026-5:1998 Part 5: Application context proforma and guidelines when using OSI TP
- ISO/IEC 10026-6:1995 Part 6: Unstructured Data Transfer
ISO/IEC 10027:1990 Information technology – Information Resource Dictionary System (IRDS) framework
ISO/IEC 10028:1993 Information technology – Telecommunications and information exchange between systems – Definition of the relaying functions of a Network layer intermediate system
ISO/IEC 10030:1995 Information technology – Telecommunications and information exchange between systems – End System Routeing Information Exchange Protocol for use in conjunction with ISO/IEC 8878
ISO/IEC TR 10032:2003 Information technology – Reference Model of Data Management
ISO/IEC TR 10034:1990 Guidelines for the preparation of conformity clauses in programming language standards
ISO/IEC 10035 Information technology – Open Systems Interconnection – Connectionless protocol for the Association Control Service Element
- ISO/IEC 10035-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
ISO/IEC 10036:1996 Information technology - Font information interchange - Procedures for registration of font-related identifiers
ISO/IEC 10040:1998 Information technology – Open Systems Interconnection – Systems management overview
ISO 10052:2004 Acoustics – Field measurements of airborne and impact sound insulation and of service equipment sound – Survey method
ISO 10055:1996 Mechanical vibration - Vibration testing requirements for shipboard equipment and machinery components
ISO 10075 Ergonomic principles related to mental workload
- ISO 10075-1:2017 Part 1: General issues and concepts, terms and definitions
ISO 10077 Thermal performance of windows, doors and shutters – Calculation of thermal transmittance
ISO 10079 Medical suction equipment
- ISO 10079-1:2015 Part 1: Electrically powered suction equipment
- ISO 10079-2:2014 Part 2: Manually powered suction equipment
- ISO 10079-3:2014 Part 3: Suction equipment powered from a vacuum or positive pressure gas source
ISO/IEC 10089:1991 Information technology – 130 mm rewritable optical disk cartridge for information interchange
ISO/IEC 10090:1992 Information technology – 90 mm optical disk cartridges, rewritable and read only, for data interchange
ISO/IEC TR 10091:1995 Information technology – Technical aspects of 130 mm optical disk cartridge write-once recording format
ISO 10110 Optics and photonics – Preparation of drawings for optical elements and systems^{[Note 3]}
- ISO 10110-1:2006 Part 1: General
- ISO 10110-2:1996 Part 2: Material imperfections – Stress birefringence
- ISO 10110-3:1996 Part 3: Material imperfections – Bubbles and inclusions
- ISO 10110-4:1997 Part 4: Material imperfections – Inhomogeneity and striae
- ISO 10110-5:2015 Part 5: Surface form tolerances
- ISO 10110-6:2015 Part 6: Centring tolerances
- ISO 10110-7:2017 Part 7: Surface imperfections
- ISO 10110-8:2010 Part 8: Surface texture; roughness and waviness
- ISO 10110-9:2016 Part 9: Surface treatment and coating
- ISO 10110-10:2004 Part 10: Table representing data of optical elements and cemented assemblies
- ISO 10110-11:2016 Part 11: Non-toleranced data
- ISO 10110-12:2007 Part 12: Aspheric surfaces
- ISO 10110-14:2007 Part 14: Wavefront deformation tolerance
- ISO 10110-17:2004 Part 17: Laser irradiation damage threshold
- ISO 10110-19:2015 Part 19: General description of surfaces and components
ISO 10112:1991 Damping materials – Graphical presentation of the complex modulus
ISO/IEC 10116 Information technology – Security techniques – Modes of operation for an n-bit block cipher
ISO/IEC 10118 Information technology – Security techniques – Hash-functions
- ISO/IEC 10118-1:2016 Part 1: General
- ISO/IEC 10118-2:2010 Part 2: Hash-functions using an n-bit block cipher
- ISO/IEC 10118-3:2004 Part 3: Dedicated hash-functions
- ISO/IEC 10118-4:1998 Part 4: Hash-functions using modular arithmetic
ISO 10132:1993 Textiles – Textured filament yarn – Definitions
ISO 10135:2007 Geometrical product specifications (GPS) – Drawing indications for moulded parts in technical product documentation (TPD)
ISO/IEC 10149:1995 Information technology - Data interchange on read-only 120 mm optical data disks (CD-ROM)
ISO 10159:2011 Health informatics – Messages and communication – Web access reference manifest
ISO 10160:2015 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Service Definition
ISO 10161 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Protocol Specification
- ISO 10161-1:2014 Part 1: Protocol specification
- ISO 10161-2:2014 Part 2: Protocol implementation conformance statement (PICS) proforma
ISO/IEC 10164 Information technology – Open Systems Interconnection – Systems Management
- ISO/IEC 10164-1:1993 Object Management Function
- ISO/IEC 10164-2:1993 State Management Function
- ISO/IEC 10164-3:1993 Attributes for representing relationships
- ISO/IEC 10164-4:1992 Alarm reporting function
- ISO/IEC 10164-5:1993 Event Report Management Function
- ISO/IEC 10164-6:1993 Log control function
- ISO/IEC 10164-7:1992 Security alarm reporting function
- ISO/IEC 10164-8:1993 Security audit trail function
- ISO/IEC 10164-9:1995 Objects and attributes for access control
- ISO/IEC 10164-10:1995 Usage metering function for accounting purposes
- ISO/IEC 10164-11:1994 Metric objects and attributes
- ISO/IEC 10164-12:1994 Test Management Function
- ISO/IEC 10164-13:1995 Summarization Function
- ISO/IEC 10164-14:1996 Confidence and diagnostic test categories
- ISO/IEC 10164-15:2002 Scheduling function
- ISO/IEC 10164-16:1997 Management knowledge management function
- ISO/IEC 10164-17:1996 Change over function
- ISO/IEC 10164-18:1997 Software management function
- ISO/IEC 10164-19:1998 Management domain and management policy management function
- ISO/IEC 10164-20:1999 Time management function
- ISO/IEC 10164-21:1998 Command sequencer for Systems Managenment
- ISO/IEC 10164-22:2000 Response time monitoring
ISO/IEC 10165 Information technology – Open Systems Interconnection – Structure of management information^{[Note 3]}
- ISO/IEC 10165-1:1993 Management Information Model
- ISO/IEC 10165-2:1992 Definition of management information
- ISO/IEC 10165-4:1992 Part 4: Guidelines for the definition of managed objects
- ISO/IEC 10165-5:1994 Generic management information
- ISO/IEC 10165-6:1997 Requirements and guidelines for implementation conformance statement proformas associated with OSI management
- ISO/IEC 10165-7:1996 General relationship model
- ISO/IEC 10165-8:2000 Managed objects for supporting upper layers
- ISO/IEC 10165-9:2000 Systems management application layer managed objects
ISO/IEC 10166 Information technology – Text and office systems – Document Filing and Retrieval (DFR)
- ISO/IEC 10166-1:1991 Part 1: Abstract service definition and procedures
- ISO/IEC 10166-2:1991 Part 2: Protocol specification
ISO/IEC TR 10171:2000 Information technology – Telecommunications and information exchange between systems – List of standard data link layer protocols that utilize high-level data link control (HDLC) classes of procedures, list of standard XID format identifiers, list of standard mode-setting information field format identifiers, and list of standard user-defined parameter set identification values
ISO/IEC 10173:1998 Information technology – Telecommunications and information exchange between systems – Interface connector and contact assignments for ISDN primary rate access connector located at reference points S and T
ISO/IEC 10175 Information technology – Text and office systems – Document Printing Application (DPA)
- ISO/IEC 10175-1:1996 Part 1: Abstract service definition and procedures
- ISO/IEC 10175-2:1996 Part 2: Protocol specification
- ISO/IEC 10175-3:2000 Part 3: Management abstract service definitions and procedures
ISO/IEC TR 10176:2003 Information technology - Guidelines for the preparation of programming language standards
ISO/IEC 10177:1993 Information technology – Telecommunications and information exchange between systems – Provision of the connection-mode Network internal layer service by intermediate systems using ISO/IEC 8208, the X.25 Packet Layer Protocol
ISO/IEC 10179:1996 Information technology – Processing languages – Document Style Semantics and Specification Language (DSSSL)
ISO/IEC 10180:1995 Information technology - Processing languages - Standard Page Description Language (SPDL)
ISO/IEC 10181 Information technology - Open Systems Interconnection - Security frameworks for open systems
- ISO/IEC 10181-1:1996 Overview
- ISO/IEC 10181-2:1996 Authentication framework
- ISO/IEC 10181-3:1996 Access control framework
- ISO/IEC 10181-4:1997 Non-repudiation framework
- ISO/IEC 10181-5:1996 Confidentiality framework
- ISO/IEC 10181-6:1996 Integrity framework
- ISO/IEC 10181-7:1996 Security audit and alarms framework
ISO/IEC TR 10182:2016 Information technology - Programming languages, their environments and system software interfaces - Guidelines for language bindings
ISO/IEC TR 10183 Information technology – Text and office systems – Office Document Architecture (ODA) and interchange format – Technical Report on ISO 8613 implementation testing
- ISO/IEC TR 10183-1:1993 Part 1: Testing methodology
- ISO/IEC TR 10183-2:1993 Part 2: Framework for abstract test cases
ISO/IEC 10192 Information technology - Home Electronic System (HES) interfaces
- ISO/IEC 10192-1:2002 Part 1: Universal Interface (UI) Class 1
- ISO/IEC TR 10192-2:2000 Part 2: Simple Interfaces Type 1
ISO/IEC 10206:1991 Information technology – Programming languages – Extended Pascal
ISO 10209:2012 Technical product documentation - Vocabulary - Terms relating to technical drawings, product definition and related documentation
ISO 10211 Thermal bridges in building construction – Heat flows and surface temperatures – Detailed calculations
ISO 10218 Robots and robotic devices – Safety requirements for industrial robots
ISO 10241 Terminological entries in standards
- ISO 10241-1:2011 Part 1: General requirements and examples of presentation
- ISO 10241-2:2012 Part 2: Adoption of standardized terminological entries
ISO 10243:2010 Tools for pressing – Compression springs with rectangular section – Housing dimensions and colour coding
ISO 10244:2010 Document management - Business process baselining and analysis
ISO 10254:2016 Air cargo and ground equipment – Vocabulary
ISO/TR 10255:2009 Document management applications - Optical disk storage technology, management and standards
ISO 10263 Earth-moving machinery – Operator enclosure environment
- ISO 10263-1:2009 Part 1: Terms and definitions
ISO 10265:2008 Earth-moving machinery - Crawler machines - Performance requirements and test procedures for braking systems
ISO 10272 Microbiology of the food chain – Horizontal method for detection and enumeration of Campylobacter spp.
- ISO 10272-1:2017 Part 1: Detection method
- ISO 10272-2:2017 Part 2: Colony-count technique
ISO 10273:2017 Microbiology of the food chain - Horizontal method for the detection of pathogenic Yersinia enterocolitica
ISO/IEC 10279:1991 Information technology – Programming languages – Full BASIC
ISO 10284:1997 Cinematography - Graphical symbols - Description
ISO 10286:2015 Gas cylinders - Terminology
ISO 10302 Acoustics – Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices
- ISO 10302-1:2011 Part 1: Airborne noise measurement
- ISO 10302-2:2011 Part 2: Structure-borne vibration measurements
ISO 10303 Industrial automation systems and integration – Product data representation and exchange
ISO 10318 Geosynthetics
- ISO 10318-1:2015 Part 1: Terms and definitions
- ISO 10318-2:2015 Part 2: Symbols and pictograms
ISO 10322 Ophthalmic optics – Semi-finished spectacle lens blanks
- ISO 10322-1:2016 Part 1: Specifications for single-vision and multifocal lens blanks
- ISO 10322-2:2016 Part 2: Specifications for progressive-power and degressive-power lens blanks
ISO 10324:1997 Information and documentation - Holdings statements - Summary level
ISO 10328:2016 Prosthetics – Structural testing of lower-limb prostheses – Requirements and test methods
ISO 10334:1994 Implants for surgery – Malleable wires for use as sutures and other surgical applications
ISO 10341:2012 Ophthalmic instruments – Refractor heads
ISO 10342:2010 Ophthalmic instruments – Eye refractometers
ISO 10343:2014 Ophthalmic instruments – Ophthalmometers
ISO 10360 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS)^{[Note 3]}
- ISO 10360-1:2000 Part 1: Vocabulary
- ISO 10360-2:2009 Part 2: CMMs used for measuring linear dimensions
- ISO 10360-3:2000 Part 3: CMMs with the axis of a rotary table as the fourth axis
- ISO 10360-4:2000 Part 4: CMMs used in scanning measuring mode
- ISO 10360-5:2010 Part 5: CMMs using single and multiple stylus contacting probing systems
- ISO 10360-6:2001 Part 6: Estimation of errors in computing Gaussian associated features
- ISO 10360-7:2011 Part 7: CMMs equipped with imaging probing systems
- ISO 10360-8:2013 Part 8: CMMs with optical distance sensors
- ISO 10360-9:2013 Part 9: CMMs with multiple probing systems
- ISO 10360-10:2016 Part 10: Laser trackers for measuring point-to-point distances
- ISO 10360-12:2016 Part 12: Articulated arm coordinate measurement machines (CMM)
ISO/IEC 10367:1991 Information technology - Standardized coded graphic character sets for use in 8-bit codes
ISO/IEC 10373 Identification cards – Test methods
- ISO/IEC 10373-1:2006 Part 1: General characteristics
- ISO/IEC 10373-2:2015 Part 2: Cards with magnetic stripes
- ISO/IEC 10373-3:2010 Part 3: Integrated circuit cards with contacts and related interface devices
- ISO/IEC 10373-5:2014 Part 5: Optical memory cards
- ISO/IEC 10373-6:2016 Part 6: Proximity cards
- ISO/IEC 10373-7:2008 Part 7: Vicinity cards
- ISO/IEC 10373-8:2011 Part 8: USB-ICC
- ISO/IEC 10373-9:2011 Part 9: Optical memory cards - Holographic recording method
ISO 10377:2013 Consumer product safety – Guidelines for suppliers
ISO 10380 Pipework — Corrugated metal hoses and hose assemblies
ISO 10383:2012 Securities and related financial instruments – Codes for exchanges and market identification (MIC)
ISO 10386:1994 Ferroboron - Specification and conditions of delivery
ISO 10387:1994 Metal chrome - Specification and conditions of delivery
ISO 10393:2013 Consumer product recall – Guidelines for suppliers
ISO 10456 Building materials and products – Hygrothermal properties – Tabulated design values and procedures for determining declared and design thermal values
ISO 10487 Passenger cars – Connections for car radios^{[Note 3]}
ISO 10494:1993 Gas turbines and gas turbine sets – Measurement of emitted airborne noise – Engineering/survey method
ISO/IEC 10514 Information technology - Programming languages
- ISO/IEC 10514-1:1996 Part 1: Modula-2, Base Language
- ISO/IEC 10514-2:1998 Part 2: Generics Modula-2
- ISO/IEC 10514-3:1998 Part 3: Object Oriented Modula-2
ISO 10524 Pressure regulators for use with medical gases
- ISO 10524-1:2006 Part 1: Pressure regulators and pressure regulators with flow-metering devices
- ISO 10524-2:2005 Part 2: Manifold and line pressure regulators
- ISO 10524-3:2005 Part 3: Pressure regulators integrated with cylinder valves
- ISO 10524-4:2008 Part 4: Low-pressure regulators
ISO 10534 Acoustics – Determination of sound absorption coefficient and impedance in impedance tubes
- ISO 10534-1:1996 Part 1: Method using standing wave ratio
- ISO 10534-2:1998 Part 2: Transfer-function method
ISO/IEC 10536 Identification cards – Contactless integrated circuit(s) cards – Close-coupled cards^{[Note 3]}
- ISO/IEC 10536-1:2000 Part 1: Physical characteristics
- ISO/IEC 10536-2:1995 Part 2: Dimensions and location of coupling areas
- ISO/IEC 10536-3:1996 Part 3: Electronic signals and reset procedures
ISO/IEC 10538:1991 Information technology - Control functions for text communication
ISO 10555 Intravascular catheters – Sterile and single-use catheters
- ISO 10555-1:2013 Part 1: General requirements
- ISO 10555-3:2013 Part 3: Central venous catheters
- ISO 10555-4:2013 Part 4: Balloon dilatation catheters
- ISO 10555-5:2013 Part 5: Over-needle peripheral catheters
- ISO 10555-6:2015 Part 6: Subcutaneous implanted ports
ISO/IEC 10561:1999 Information technology - Office equipment - Printing devices - Method for measuring throughput - Class 1 and Class 2 printers
ISO 10567:2007 Earth-moving machinery - Hydraulic excavators - Lift capacity
ISO 10576 Statistical methods - Guidelines for the evaluation of conformity with specified requirements
- ISO 10576-1:2003 Part 1: General principles
ISO 10579:2010 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Non-rigid parts
ISO 10585:1996 Information and documentation - Armenian alphabet coded character set for bibliographic information interchange
ISO 10586:1996 Information and documentation - Georgian alphabet coded character set for bibliographic information interchange
ISO/IEC 10588:1993 Information technology – Use of X.25 Packet Layer Protocol in conjunction with X.21/X.21 bis to provide the OSI connection-mode Network Service
ISO/IEC 10589:2002 Information technology – Telecommunications and information exchange between systems – Intermediate System to Intermediate System intra-domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)
ISO 10625:2005 Equipment for crop protection – Sprayer nozzles – Colour coding for identification
ISO 10628 Flow diagrams for process plants
ISO/IEC 10641:1993 Information technology - Computer graphics and image processing - Conformance testing of implementations of graphics standards
ISO/IEC 10646:2017 Information technology – Universal Coded Character Set (UCS)
ISO 10651 Lung ventilators for medical use – Particular requirements for basic safety and essential performance^{[Note 3]}
- ISO 10651-3:1997 Part 3: Particular requirements for emergency and transport ventilators
- ISO 10651-4:2002 Part 4: Particular requirements for operator-powered resuscitators
- ISO 10651-5:2006 Part 5: Gas-powered emergency resuscitators
- ISO 10651-6:2004 Part 6: Home-care ventilatory support devices
ISO 10656:2016 Resistance welding equipment – Transformers – Integrated transformers for welding guns
ISO 10664 Hexalobular internal driving feature for bolts and screws – Torx screw head
ISO 10667 Assessment service delivery – Procedures and methods to assess people in work and organizational settings
- ISO 10667-1:2011 Part 1: Requirements for the client
- ISO 10667-2:2011 Part 2: Requirements for service providers
ISO 10668:2010 Brand valuation - Requirements for monetary brand valuation
ISO 10685 Ophthalmic optics – Spectacle frames and sunglasses electronic catalogue and identification
- ISO 10685-1:2011 Part 1: Product identification and electronic catalogue product hierarchy
- ISO 10685-2:2016 Part 2: Commercial information
- ISO 10685-3:2012 Part 3: Technical information
ISO 10703:2007 Water quality - Determination of the activity concentration of radionuclides - Method by high resolution gamma-ray spectrometry
ISO 10705 Water quality – Detection and enumeration of bacteriophages
- ISO 10705-1:1995 Part 1: Enumeration of F-specific RNA bacteriophages
- ISO 10705-2:2000 Part 2: Enumeration of somatic coliphages
- ISO 10705-3:2003 Part 3: Validation of methods for concentration of bacteriophages from water
- ISO 10705-4:2001 Part 4: Enumeration of bacteriophages infecting Bacteroides fragilis
ISO 10711:2012 Intelligent Transport Systems – Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors
ISO 10718:2015 Cork stoppers – Characterization of a low-in-germs stopper, through the enumeration of colony-forming units of yeasts, moulds and bacteria, capable of both being extracted and growing in alcoholic medium
ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials
ISO/IEC 10728:1993 Information technology – Information Resource Dictionary System (IRDS) Services Interface
ISO/IEC 10731:1994 Information technology - Open Systems Interconnection - Basic Reference Model - Conventions for the definition of OSI services
ISO/IEC 10732:1993 Information technology – Use of X.25 Packet Layer Protocol to provide the OSI connection-mode Network Service over the telephone network
ISO/IEC 10733:1998 Information technology – Elements of management information related to the OSI Network Layer
ISO/IEC 10736:1995 Information technology – Telecommunications and information exchange between systems – Transport layer security protocol
ISO/IEC 10737:1998 Information technology – Elements of management information related to OSI Transport layer
ISO/IEC 10741 Information technology – User system interfaces – Dialogue interaction
- ISO/IEC 10741-1:1995 Part 1: Cursor control for text editing
ISO/IEC 10742:1994 Information technology – Telecommunications and information exchange between systems – Elements of management information related to OSI Data Link Layer standards
ISO/IEC 10744:1997 Information technology - Hypermedia/Time-based Structuring Language (HyTime)
ISO/IEC 10745:1995 Information technology - Open Systems Interconnection - Upper layers security model
ISO/IEC 10746 Information technology—Open Distributed Processing—Reference model
- ISO/IEC 10746-1:1998 Overview
- ISO/IEC 10746-2:2009 Foundations
- ISO/IEC 10746-3:2009 Architecture
- ISO/IEC 10746-4:1998 Architectural semantics
ISO/IEC 10747:1994 Information technology – Telecommunications and information exchange between systems – Protocol for exchange of inter-domain routeing information among intermediate systems to support forwarding of ISO 8473 PDUs
ISO 10754:1996 Information and documentation - Extension of the Cyrillic alphabet coded character set for non-Slavic languages for bibliographic information interchange
ISO/IEC 10779:2008 Information technology – Office equipment accessibility guidelines for elderly persons and persons with disabilities
ISO/HL7 10781:2015 Health Informatics – HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM)
ISO 10782 Definitions and attributes of data elements for control and monitoring of textile processes
- ISO 10782-1:1998 Part 1: Spinning, spinning preparatory and related processes
ISO 10790:2015 Measurement of fluid flow in closed conduits – Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
ISO 10795:2011 Space systems – Programme management and quality – Vocabulary
ISO/TS 10797:2012 Nanotechnologies – Characterization of single-wall carbon nanotubes using transmission electron microscopy
ISO/TS 10798:2011 Nanotechnologies – Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
ISO 10801:2010 Nanotechnologies – Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
ISO 10807:1994 Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres
ISO 10808:2010 Nanotechnologies – Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
ISO/TS 10811 Mechanical vibration and shock – Vibration and shock in buildings with sensitive equipment
- ISO/TS 10811-1:2000 Part 1: Measurement and evaluation
- ISO/TS 10811-2:2000 Part 2: Classification
ISO 10813 Vibration generating machines – Guidance for selection
- ISO 10813-1:2004 Part 1: Equipment for environmental testing
ISO 10815:2016 Mechanical vibration – Measurement of vibration generated internally in railway tunnels by the passage of trains
ISO 10816 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts
- ISO 10816-1:1995 Part 1: General guidelines
- ISO 10816-2:2009 Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
- ISO 10816-3:2009 Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
- ISO 10816-4:2009 Part 4: Gas turbine sets with fluid-film bearings
- ISO 10816-5:2000 Part 5: Machine sets in hydraulic power generating and pumping plants
- ISO 10816-6:1995 Part 6: Reciprocating machines with power ratings above 100 kW
- ISO 10816-7:2009 Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
- ISO 10816-8:2014 Part 8: Reciprocating compressor systems
- ISO 10816-21:2015 Part 21: Horizontal axis wind turbines with gearbox
ISO 10817 Rotating shaft vibration measuring systems
- ISO 10817-1:1998 Part 1: Relative and absolute sensing of radial vibration
ISO 10825:1995 Gears - Wear and damage to gear teeth - Terminology
ISO 10843:1997 Acoustics – Methods for the description and physical measurement of single impulses or series of impulses
ISO 10844:2014 Acoustics – Specification of test tracks for measuring noise emitted by road vehicles and their tyres
ISO 10846 Acoustics and vibration – Laboratory measurement of vibro-acoustic transfer properties of resilient elements
- ISO 10846-1:2008 Part 1: Principles and guidelines
- ISO 10846-2:2008 Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
- ISO 10846-3:2002 Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
- ISO 10846-4:2003 Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
- ISO 10846-5:2008 Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
ISO 10847:1997 Acoustics – In-situ determination of insertion loss of outdoor noise barriers of all types
ISO/IEC 10859:1997 Information technology - 8-bit backplane interface: STEbus and mechanical core specifications for microcomputers
ISO/IEC 10861:1994 Information technology - Microprocessor systems - High-performance synchronous 32-bit bus: MULTIBUS II
ISO/TS 10867:2010 Nanotechnologies – Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
ISO/TS 10868:2017 Nanotechnologies – Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
ISO 10878:2013 Non-destructive testing - Infrared thermography - Vocabulary
ISO/IEC 10885:1993 Information technology - 356 mm optical disk cartridge for information interchange - Write once
ISO/IEC 10918 Information technology - Digital compression and coding of continuous-tone still images
ISO/TR 10929:2012 Nanotechnologies – Characterization of multiwall carbon nanotube (MWCNT) samples
ISO 10934 Optics and optical instruments - Vocabulary for microscopy
- ISO 10934-1:2002 Part 1: Light microscopy
- ISO 10934-2:2007 Part 2: Advanced techniques in light microscopy
ISO 10936 Optics and photonics – Operation microscopes
- ISO 10936-1:2017 Part 1: Requirements and test methods
- ISO 10936-2:2010 Part 2: Light hazard from operation microscopes used in ocular surgery
ISO 10938:2016 Ophthalmic optics – Chart displays for visual acuity measurement – Printed, projected and electronic
ISO 10939:2017 Ophthalmic instruments – Slit-lamp microscopes
ISO 10940:2009 Ophthalmic instruments – Fundus cameras
ISO 10942:2006 Ophthalmic instruments – Direct ophthalmoscopes
ISO 10943:2011 Ophthalmic instruments – Indirect ophthalmoscopes
ISO 10944:2009 Ophthalmic instruments – Synoptophores
ISO 10957:2009 Information and documentation – International standard music number (ISMN)
ISO 10962:2015 Securities and related financial instruments – Classification of financial instruments (CFI code)
ISO/IEC 10967 Information technology – Language independent arithmetic
ISO/TS 10974:2012 Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device
ISO 10985:2009 Caps made of aluminium-plastics combinations for infusion bottles and injection vials – Requirements and test methods
ISO 10991:2009 Micro process engineering – Vocabulary
ISO/TR 10992:2011 Intelligent transport systems – Use of nomadic and portable devices to support ITS service and multimedia provision in vehicles
ISO 10993 Biological evaluation of medical devices
ISO/IEC 10994:1992 Information technology – Data interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 31 831 ftprad on 80 tracks on each side – ISO Type 303
ISO/IEC 10995:2011 Information technology - Digitally recorded media for information interchange and storage - Test method for the estimation of the archival lifetime of optical media

ISO 11000 – ISO 11999

ISO/IEC 11002:2008 Information technology - Multipath management API
ISO 11005:2010 Technical product documentation – Use of main documents
ISO 11011:2013 Compressed air - Energy efficiency - Assessment^[3]
ISO 11014:2009 Safety data sheet for chemical products - Content and order of sections
ISO/IEC TR 11017:1998 Information technology - Framework for internationalization
ISO 11040 Prefilled syringes
- ISO 11040-1:2015 Part 1: Glass cylinders for dental local anaesthetic cartridges
- ISO 11040-2:2011 Part 2: Plunger stoppers for dental local anaesthetic cartridges
- ISO 11040-3:2012 Part 3: Seals for dental local anaesthetic cartridges
- ISO 11040-4:2015 Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling
- ISO 11040-5:2012 Part 5: Plunger stoppers for injectables
- ISO 11040-6:2012 Part 6: Plastic barrels for injectables
- ISO 11040-7:2015 Part 7: Packaging systems for sterilized subassembled syringes ready for filling
- ISO 11040-8:2016 Part 8: Requirements and test methods for finished prefilled syringes
ISO 11064 Ergonomic design of control centres
- ISO 11064-1:2000 Principles for the design of control centres
- ISO 11064-2:2000 Principles for the arrangement of control suites
- ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002
- ISO 11064-4:2013 Layout and dimensions of workstations
- ISO 11064-5:2008 Displays and controls
- ISO 11064-6:2005 Environmental requirements for control centres
- ISO 11064-7:2006 Principles for the evaluation of control centres
ISO/TR 11065:1992 Industrial automation glossary
ISO 11067:2015 Intelligent transport systems – Curve speed warning systems (CSWS) – Performance requirements and test procedures
ISO 11070:2014 Sterile single-use intravascular introducers, dilators and guidewires
ISO/IEC 11072:1992 Information technology - Computer graphics - Computer Graphics Reference Model
ISO/IEEE 11073 Health informatics - Point-of-care medical device communication
ISO 11074:2015 Soil quality - Vocabulary
ISO 11086:1996 Gas turbines - Vocabulary
ISO 11091:1994 Construction drawings – Landscape drawing practice
ISO 11095:1996 Linear calibration using reference materials
ISO 11107:2009 Recreational diving services – Requirements for training programmes on enriched air nitrox (EAN) diving
ISO 11108:1996 Information and documentation - Archival paper - Requirements for permanence and durability
ISO 11117:2008 Gas cylinders – Valve protection caps and valve guards – Design, construction and tests
ISO 11120 Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing
ISO 11121:2017 Recreational diving services – Requirements for introductory programmes to scuba diving
ISO 11124 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives
- ISO 11124-1:1993 Part 1: General introduction and classification
- ISO 11124-2:1993 Part 2: Chilled-iron grit
- ISO 11124-3:1993 Part 3: High-carbon cast-steel shot and grit
- ISO 11124-4:1993 Part 4: Low-carbon cast-steel shot
ISO 11125 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives
- ISO 11125-1:1993 Part 1: Sampling
- ISO 11125-2:1993 Part 2: Determination of particle size distribution
- ISO 11125-3:1993 Part 3: Determination of hardness
- ISO 11125-4:1993 Part 4: Determination of apparent density
- ISO 11125-5:1993 Part 5: Determination of percentage defective particles and of microstructure
- ISO 11125-6:1993 Part 6: Determination of foreign matter
- ISO 11125-7:1993 Part 7: Determination of moisture
ISO 11126 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives
- ISO 11126-1:1993 Part 1: General introduction and classification
- ISO 11126-3:1993 Part 3: Copper refinery slag
- ISO 11126-4:1993 Part 4: Coal furnace slag
- ISO 11126-5:1993 Part 5: Nickel refinery slag
- ISO 11126-6:1993 Part 6: Iron furnace slag
- ISO 11126-7:1995 Part 7: Fused aluminium oxide
- ISO 11126-8:1993 Part 8: Olivine sand
- ISO 11126-9:1999 Part 9: Staurolite
- ISO 11126-10:2000 Part 10: Almandite garnet
ISO 11127 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives
- ISO 11127-1:2011 Part 1: Sampling
- ISO 11127-2:2011 Part 2: Determination of particle size distribution
- ISO 11127-3:2011 Part 3: Determination of apparent density
- ISO 11127-4:2011 Part 4: Assessment of hardness by a glass slide test
- ISO 11127-5:2011 Part 5: Determination of moisture
- ISO 11127-6:2011 Part 6: Determination of water-soluble contaminants by conductivity measurement
- ISO 11127-7:2011 Part 7: Determination of water-soluble chlorides
ISO 11133:2014 Microbiology of food, animal feed and water – Preparation, production, storage and performance testing of culture media
ISO 11135:2014 Sterilization of health-care products—Ethylene oxide—Requirements for the development, validation and routine control of a sterilization process for medical devices
ISO 11137 Sterilization of health care products – Radiation
ISO 11138 Sterilization of health care products - Biological indicators
- ISO 11138-1:2017 Part 1: General requirements
- ISO 11138-2:2017 Part 2: Biological indicators for ethylene oxide sterilization processes
- ISO 11138-3:2017 Part 3: Biological indicators for moist heat sterilization processes
- ISO 11138-4:2017 Part 4: Biological indicators for dry heat sterilization processes
- ISO 11138-5:2017 Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes
ISO/TS 11139:2006 Sterilization of health care products - Vocabulary
ISO 11145:2016 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols
ISO 11146 Lasers and laser-related equipment – Test methods for laser beam widths, divergence angles and beam propagation ratios
- ISO 11146-1:2005 Part 1: Stigmatic and simple astigmatic beams
- ISO 11146-2:2005 Part 2: General astigmatic beams
- ISO/TR 11146-3:2004 Part 3: Intrinsic and geometrical laser beam classification, propagation and details of test methods
ISO 11151 Lasers and laser-related equipment – Standard optical components
- ISO 11151-1:2015 Part 1: Components for the UV, visible and near-infrared spectral ranges
- ISO 11151-2:2015 Part 2: Components for the infrared spectral range
ISO 11156:2011 Packaging - Accessible design - General requirements
ISO/IEC 11160 Information technology - Office equipment - Minimum information to be included in specification sheets - Printers
- ISO/IEC 11160-1:1996 Part 1: Class 1 and Class 2 printers
- ISO/IEC 11160-2:2013 Part 2: Class 3 and Class 4 printers
ISO 11170:2003 Hydraulic fluid power – Filter elements – Sequence of tests for verifying performance characteristics
ISO 11171:2010 Hydraulic fluid power – Calibration of automatic particle counters for liquids
ISO/IEC 11172 Information technology – Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s
ISO/IEC 11179 Information technology – Metadata registries (MDR)
ISO 11192:2005 Small craft - Graphical symbols
ISO 11195:1995 Gas mixers for medical use – Stand-alone gas mixers
ISO 11197:2016 Medical supply units
ISO 11200:2014 Acoustics – Noise emitted by machinery and equipment – Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
ISO 11201:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
ISO 11202:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
ISO 11203:1995 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
ISO 11204:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
ISO 11205:2003 Acoustics – Noise emitted by machinery and equipment – Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
ISO/TR 11219:2012 Information and documentation - Qualitative conditions and basic statistics for library buildings - Space, function and design
ISO 11224:2003 Textiles – Web formation and bonding in nonwovens – Vocabulary
ISO 11238:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated information on substances
ISO 11239:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging
ISO 11240:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of units of measurement
ISO/TS 11251:2010 Nanotechnologies – Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
ISO 11252:2013 Lasers and laser-related equipment – Laser device – Minimum requirements for documentation
ISO 11270:2014 Intelligent transport systems – Lane keeping assistance systems (LKAS) – Performance requirements and test procedures
ISO 11290 Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp.
- ISO 11290-1:2017 Part 1: Detection method
- ISO 11290-2:2017 Part 2: Enumeration method
ISO/TS 11308:2011 Nanotechnologies – Characterization of single-wall carbon nanotubes using thermogravimetric analysis
ISO 11318:2002 Cardiac defibrillators – Connector assembly DF-1 for implantable defibrillators – Dimensions and test requirements
ISO/IEC 11319:1993 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording
ISO/IEC 11321:1992 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DATA/DAT format
ISO 11323:2010 Iron ore and direct reduced iron – Vocabulary
ISO/TR 11328:1994 Measurement of liquid flow in open channels – Equipment for the measurement of discharge under ice conditions
ISO 11329:2001 Hydrometric determinations – Measurement of suspended sediment transport in tidal channels
ISO 11357 Plastics – Differential scanning calorimetry (DSC)
- ISO 11357-1:2009 General principles
- ISO 11357-2:2013 Determination of glass transition temperature and glass transition step height
- ISO 11357-3:2011 Determination of temperature and enthalpy of melting and crystallization
- ISO 11357-4:2005 Determination of specific heat capacity
- ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
- ISO 11357-6:2008 Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
- ISO 11357-7:2002 Determination of crystallization kinetics
ISO/TR 11360:2010 Nanotechnologies – Methodology for the classification and categorization of nanomaterials
ISO 11375:1998 Building construction machinery and equipment – Terms and definitions
ISO 11380:1994 Optics and optical instruments – Ophthalmic optics – Formers
ISO 11381:2016 Ophthalmic optics – Spectacle frames – Screw threads
ISO 11400:1992 Nickel, ferronickel and nickel alloys - Determination of phosphorus content - Phosphovanadomolybdate molecular absorption spectrometric method
ISO/IEC 11404:2007 Information technology – General-Purpose Datatypes (GPD)
ISO/IEC 11411:1995 Information technology - Representation for human communication of state transition of software
ISO 11418 Containers and accessories for pharmaceutical preparations
- ISO 11418-1:2016 Part 1: Drop-dispensing glass bottles
- ISO 11418-2:2016 Part 2: Screw-neck glass bottles for syrups
- ISO 11418-3:2016 Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms
- ISO 11418-5:2015 Part 5: Dropper assemblies
- ISO 11418-7:2016 Part 7: Screw-neck vials made of glass tubing for liquid dosage forms
ISO 11421:1997 Optics and optical instruments - Accuracy of optical transfer function (OTF) measurement
ISO 11442:2006 Technical product documentation – Document management
ISO 11446:2004 Road vehicles – Connectors for the electrical connection of towing and towed vehicles – 13-pole connectors for vehicles with 12 V nominal supply voltage
ISO 11450:1999 Equipment for harvesting and conservation – Round balers – Terminology and commercial specifications
ISO 11451 Road vehicles – Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy
- ISO 11451-1:2015 Part 1: General principles and terminology
- ISO 11451-2:2015 Part 2: Off-vehicle radiation sources
- ISO 11451-3:2015 Part 3: On-board transmitter simulation
- ISO 11451-4:2013 Part 4: Bulk current injection (BCI)
ISO 11452 Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
- ISO 11452-1:2015 Part 1: General principles and terminology
- ISO 11452-2:2004 Part 2: Absorber-lined shielded enclosure
- ISO 11452-3:2016 Part 3: Transverse electromagnetic (TEM) cell
- ISO 11452-4:2011 Part 4: Harness excitation methods
- ISO 11452-5:2002 Part 5: Stripline
- ISO 11452-7:2003 Part 7: Direct radio frequency (RF) power injection
- ISO 11452-8:2015 Part 8: Immunity to magnetic fields
- ISO 11452-9:2012 Part 9: Portable transmitters
- ISO 11452-10:2009 Part 10: Immunity to conducted disturbances in the extended audio frequency range
- ISO 11452-11:2010 Part 11: Reverberation chamber
ISO 11453:1996 Statistical interpretation of data - Tests and confidence intervals relating to proportions
ISO/IEC 11458:1993 Information technology - Microprocessor systems - VICbus - Inter-crate cable bus
ISO 11462 Guidelines for implementation of statistical process control (SPC)
- ISO 11462-1:2001 Part 1: Elements of SPC
- ISO 11462-2:2010 Part 2: Catalogue of tools and techniques
ISO 11469:2000 Plastics – Generic identification and marking of plastics products
ISO 11484:2009 Steel products – Employer's qualification system for non-destructive testing (NDT) personnel
ISO 11485 Glass in building – Curved glass
- ISO 11485-1:2011 Part 1: Terminology and definitions
ISO/TR 11487:2008 Health informatics – Clinical stakeholder participation in the work of ISO TC 215
ISO 11491:2017 Implants for surgery – Determination of impact resistance of ceramic femoral heads for hip joint prostheses
ISO 11499:2014 Dentistry – Single-use cartridges for local anaesthetics
ISO/IEC 11518 Information technology - High-Performance Parallel Interface
- ISO/IEC 11518-1:1995 Part 1: Mechanical, electrical and signalling protocol specification (HIPPI-PH)
- ISO/IEC 11518-2:2000 Part 2: Framing Protocol (HIPPI-FP)
- ISO/IEC 11518-3:1996 Part 3: Encapsulation of ISO/IEC 8802-2 (IEEE Std 802.2) Logical Link Control Protocol Data Units (HIPPI-LE)
- ISO/IEC 11518-6:2000 Part 6: Physical Switch Control (HIPPI-SC)
- ISO/IEC 11518-9:1999 Part 9: Serial specification (HIPPI-Serial)
- ISO/IEC 11518-10:2001 Part 10: 6400 Mbit/s Physical Layer (HIPPI-6400-PH)
ISO 11532:2012 Aircraft ground equipment - Graphical symbols
ISO/IEC 11544:1993 Information technology - Coded representation of picture and audio information - Progressive bi-level image compression
ISO 11546 Acoustics – Determination of sound insulation performances of enclosures
- ISO 11546-1:1995 Part 1: Measurements under laboratory conditions (for declaration purposes)
- ISO 11546-2:1995 Part 2: Measurements in situ (for acceptance and verification purposes)
ISO/TR 11548 Communication aids for blind persons - Identifiers, names and assignation to coded character sets for 8-dot Braille characters
- ISO/TR 11548-1:2001 Part 1: General guidelines for Braille identifiers and shift marks
- ISO/TR 11548-2:2001 Part 2: Latin alphabet based character sets
ISO 11551:2003 Optics and optical instruments – Lasers and laser-related equipment – Test method for absorptance of optical laser components
ISO 11553 Safety of machinery – Laser processing machines
- ISO 11553-1:2005 Part 1: General safety requirements
- ISO 11553-2:2007 Part 2: Safety requirements for hand-held laser processing devices
- ISO 11553-3:2013 Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
ISO 11554:2017 Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power, energy and temporal characteristics
ISO/IEC 11557:1992 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-DC format using 60 m and 90 m length tapes
ISO/IEC 11558:1992 Information technology – Data compression for information interchange – Adaptive coding with embedded dictionary – DCLZ Algorithm
ISO/IEC 11559:1993 Information technology – Data interchange on 12,7 mm wide 18-track magnetic tape cartridges – Extended format
ISO/IEC 11560:1992 Information technology - Information interchange on 130 mm optical disk cartridges using the magneto-optical effect, for write once, read multiple functionality
ISO 11568 Financial services – Key management (retail)^{[Note 3]}
- ISO 11568-1:2005 Part 1: Principles
- ISO 11568-2:2012 Part 2: Symmetric ciphers, their key management and life cycle
- ISO 11568-4:2007 Part 4: Asymmetric cryptosystems – Key management and life cycle
ISO/IEC 11569:1993 Information technology – Telecommunications and information exchange between systems – 26-pole interface connector mateability dimensions and contact number assignments
ISO/IEC 11570:1992 Information technology – Telecommunications and information exchange between systems – Open Systems Interconnection – Transport protocol identification mechanism
ISO/IEC 11571:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Networks – Addressing
ISO/IEC 11572:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit mode bearer services – Inter-exchange signalling procedures and protocol
ISO/IEC 11573:1994 Information technology – Telecommunications and information exchange between systems – Synchronization methods and technical requirements for Private Integrated Services Networks
ISO/IEC 11574:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit-mode 64 kbit/s bearer services – Service description, functional capabilities and information flows
ISO/IEC 11575:1995 Information technology – Telecommunications and information exchange between systems – Protocol mappings for the OSI Data Link service
ISO/IEC 11576:1994 Information technology – Procedure for the registration of algorithms for the lossless compression of data
ISO/IEC 11577:1995 Information technology – Open Systems Interconnection – Network layer security protocol
ISO/IEC 11578:1996 Information technology – Open Systems Interconnection – Remote procedure call (RPC)
ISO/IEC 11579 Information technology – Telecommunications and information exchange between systems – Private integrated services network
- ISO/IEC 11579-1:1994 Part 1: Reference configuration for PISN Exchanges (PINX)
- ISO/IEC 11579-2:1999 Part 2: Reference configuration for HS-PISN Exchanges (HS-PINX)
- ISO/IEC 11579-3:1999 Part 3: Reference configuration for PINX extension lines
ISO/IEC TR 11580:2007 Information technology – Framework for describing user interface objects, actions and attributes
ISO/IEC 11581 Information technology – User interface icons^{[Note 3]}
- ISO/IEC 11581-1:2000 Part 1: Icons – General
- ISO/IEC TR 11581-1:2011 Part 1: Introduction to and overview of icon standards
- ISO/IEC 11581-2:2000 Part 2: Object icons
- ISO/IEC 11581-3:2000 Part 3: Pointer icons
- ISO/IEC 11581-5:2004 Part 5: Tool icons
- ISO/IEC 11581-6:1999 Part 6: Action icons
- ISO/IEC 11581-10:2010 Part 10: Framework and general guidance
- ISO/IEC 11581-40:2011 Part 40: Management of icon registration
- ISO/IEC TS 11581-41:2014 Part 41: Data structure to be used by the ISO/IEC JTC 1/SC 35 icon database
ISO/IEC 11582:2002 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Generic functional protocol for the support of supplementary services – Inter-exchange signalling procedures and protocol
ISO/TR 11583:2012 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
ISO/IEC 11584:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Circuit-mode multi-rate bearer services – Service description, functional capabilities and information flows
ISO/IEC 11586 Information technology - Open Systems Interconnection - Generic upper layers security
- ISO/IEC 11586-1:1996 Overview, models and notation
- ISO/IEC 11586-2:1996 Security Exchange Service Element (SESE) service definition
- ISO/IEC 11586-3:1996 Security Exchange Service Element (SESE) protocol specification
- ISO/IEC 11586-4:1996 Protecting transfer syntax specification
- ISO/IEC 11586-5:1997 Security Exchange Service Element (SESE) Protocol Implementation Conformance Statement (PICS) proforma
- ISO/IEC 11586-6:1997 Protecting transfer syntax Protocol Implementation Conformance Statement (PICS) proforma
ISO/IEC 11587:1996 Information technology – Open Systems Interconnection – Application Context for Systems Management with Transaction Processing
ISO 11593:1996 Manipulating industrial robots - Automatic end effector exchange systems - Vocabulary and presentation of characteristics
ISO 11607:2006 Packaging for Terminally Sterilized Medical Devices
ISO 11608 Needle-based injection systems for medical use – Requirements and test methods^{[Note 3]}
- ISO 11608-1:2014 Part 1: Needle-based injection systems
- ISO 11608-2:2012 Part 2: Needles
- ISO 11608-3:2012 Part 3: Finished containers
- ISO 11608-4:2006 Part 4: Requirements and test methods for electronic and electromechanical pen-injectors
- ISO 11608-5:2012 Part 5: Automated functions
- ISO 11608-7:2016 Part 7: Accessibility for persons with visual impairment
ISO 11609:2017 Dentistry - Dentifrices - Requirements, test methods and marking
ISO/TR 11610:2004 Protective clothing - Vocabulary
ISO 11615:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated medicinal product information
ISO 11616:2012 Health informatics – Identification of medicinal products – Data elements and structures for the unique identification and exchange of regulated pharmaceutical product information
ISO 11620:2014 Information and documentation - Library performance indicators
ISO 11631:1998 Measurement of fluid flow – Methods of specifying flowmeter performance
ISO/TR 11633 Health informatics – Information security management for remote maintenance of medical devices and medical information systems
- ISO/TR 11633-1:2009 Part 1: Requirements and risk analysis
- ISO/TR 11633-2:2009 Part 2: Implementation of an information security management system (ISMS)
ISO/TR 11636:2009 Health Informatics – Dynamic on-demand virtual private network for health information infrastructure
ISO 11648 Statistical aspects of sampling from bulk materials
- ISO 11648-1:2003 Part 1: General principles
- ISO 11648-2:2001 Part 2: Sampling of particulate materials
ISO 11649:2009 Financial services – Core banking – Structured creditor reference to remittance information
ISO/TR 11651:2015 Estimation of sediment deposition in reservoirs using one dimensional simulation models
ISO 11655:1995 Measurement of liquid flow in open channels – Method of specifying performance of hydrometric equipment
ISO 11657:2014 Hydrometry – Suspended sediment in streams and canals – Determination of concentration by surrogate techniques
ISO 11658:2012 Cardiovascular implants and extracorporeal systems – Blood/tissue contact surface modifications for extracorporeal perfusion systems
ISO 11663:2014 Quality of dialysis fluid for haemodialysis and related therapies
ISO 11664 Colorimetry
- ISO 11664-1:2007 Part 1: CIE standard colorimetric observers
- ISO 11664-2:2007 Part 2: CIE standard illuminants
- ISO 11664-3:2012 Part 3: CIE tristimulus values
- ISO 11664-4:2008 Part 4: CIE 1976 L*a*b* Colour space
- ISO/CIE 11664-5:2016 Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram
- ISO/CIE 11664-6:2014 Part 6: CIEDE2000 Colour-difference formula
ISO 11665 Measurement of radioactivity in the environment - Air: radon-222
- ISO 11665-1:2012 Part 1: Origins of radon and its short-lived decay products and associated measurement methods
- ISO 11665-2:2012 Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products
- ISO 11665-3:2012 Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products
- ISO 11665-4:2012 Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis
- ISO 11665-5:2012 Part 5: Continuous measurement method of the activity concentration
- ISO 11665-6:2012 Part 6: Spot measurement method of the activity concentration
- ISO 11665-7:2012 Part 7: Accumulation method for estimating surface exhalation rate
- ISO 11665-8:2012 Part 8: Methodologies for initial and additional investigations in buildings
- ISO 11665-9:2016 Part 9: Test methods for exhalation rate of building materials
- ISO 11665-11:2016 Part 11: Test method for soil gas with sampling at depth
ISO/TS 11669:2012 Translation projects - General guidance
ISO 11670:2003 Lasers and laser-related equipment – Test methods for laser beam parameters – Beam positional stability
ISO/TS 11672:2016 Connectors for fluid power and general use - Designation and nomenclature
ISO 11675:2005 Textile machinery and accessories – Flatbed knitting machines – Vocabulary
ISO 11676:2014 Textile machinery and accessories – Pattern disks and pattern chains for warp knitting machines – Vocabulary and symbols
ISO 11683:1997 Packaging - Tactile warnings of danger - Requirements
ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Safety signs and hazard pictorials - General principles
ISO/TR 11688 Acoustics – Recommended practice for the design of low-noise machinery and equipment
- ISO/TR 11688-1:1995 Part 1: Planning
- ISO/TR 11688-2:1998 Part 2: Introduction to the physics of low-noise design
ISO 11689:1996 Acoustics – Procedure for the comparison of noise-emission data for machinery and equipment
ISO/IEC 11693 Identification cards – Optical memory cards
- ISO/IEC 11693-1:2012 Part 1: General characteristics
- ISO/IEC 11693-2:2009 Part 2: Co-existence of optical memory with other machine readable technologies
- ISO/IEC 11693-3:2015 Part 3: Authentication techniques
ISO/IEC 11694 Identification cards – Optical memory cards – Linear recording method
- ISO/IEC 11694-1:2012 Part 1: Physical characteristics
- ISO/IEC 11694-2:2012 Part 2: Dimensions and location of the accessible optical area
- ISO/IEC 11694-3:2015 Part 3: Optical properties and characteristics
- ISO/IEC 11694-4:2008 Part 4: Logical data structures
- ISO/IEC 11694-5:2014 Part 5: Data format for information interchange for applications using ISO/IEC 11694-4
- ISO/IEC 11694-6:2014 Part 6: Use of biometrics on an optical memory card
ISO/IEC 11695 Identification cards – Optical memory cards – Holographic recording method
- ISO/IEC 11695-1:2015 Part 1: Physical characteristics
- ISO/IEC 11695-2:2015 Part 2: Dimensions and location of accessible optical area
- ISO/IEC 11695-3:2017 Part 3: Optical properties and characteristics
ISO 11704:2010 Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method
ISO 11712:2009 Anaesthetic and respiratory equipment – Supralaryngeal airways and connectors
ISO 11731:2017 Water quality - Enumeration of Legionella
ISO 11737 Sterilization of medical devices – Microbiological methods
- ISO 11737-1:2006 Part 1: Determination of a population of microorganisms on products
- ISO 11737-2:2009 Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process
ISO/IEC 11756:1999 Information technology - Programming languages - M
ISO/TR 11766:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Security considerations for lawful interception
ISO/TR 11769:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Data retention for law enforcement
ISO/IEC 11770 Information technology - Security techniques - Key management
- ISO/IEC 11770-1:2010 Part 1: Framework
- ISO/IEC 11770-2:2008 Part 2: Mechanisms using symmetric techniques
- ISO/IEC 11770-3:2015 Part 3: Mechanisms using asymmetric techniques
- ISO/IEC 11770-4:2006 Part 4: Mechanisms based on weak secrets
- ISO/IEC 11770-5:2011 Part 5: Group key management
- ISO/IEC 11770-6:2016 Part 6: Key derivation
ISO/TS 11774:2011 Non-destructive testing – Performance-based qualification
ISO 11783 Tractors and machinery for agriculture and forestry – Serial control and communications data network
ISO 11798:1999 Information and documentation - Permanence and durability of writing, printing and copying on paper - Requirements and test methods
ISO 11799:2015 Information and documentation - Document storage requirements for archive and library materials
ISO 11800:1998 Information and documentation – Requirements for binding materials and methods used in the manufacture of books
ISO/IEC 11801:2002 Information technology – Generic cabling for customer premises^{[Note 3]}
- ISO/IEC TR 11801-9901:2014 Part 9901: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission
- ISO/IEC TR 11801-9902:2017 Part 9902: Specifications for End-to-end link configurations
- ISO/IEC TR 11801-9903:2015 Part 9903: Matrix modelling of channels and links
- ISO/IEC TR 11801-9904:2017 Part 9904: Guidelines for the use of installed cabling to support 2,5GBASE -T and 5GBASE -T applications
ISO/IEC TR 11802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Technical reports and guidelines
- ISO/IEC TR 11802-5:1997 Part 5: Media Access Control (MAC) Bridging of Ethernet V2.0 in Local Area Networks
ISO 11807 Integrated optics - Vocabulary
- ISO 11807-1:2001 Part 1: Basic terms and symbols
- ISO 11807-2:2001 Part 2: Terms used in classification
ISO 11810:2015 Lasers and laser-related equipment – Test method and classification for the laser resistance of surgical drapes and/or patient protective covers – Primary ignition, penetration, flame spread and secondary ignition
ISO/TR 11811:2012 Nanotechnologies – Guidance on methods for nano- and microtribology measurements
ISO 11819 Acoustics – Measurement of the influence of road surfaces on traffic noise^{[Note 3]}
- ISO 11819-1:1997 Part 1: Statistical Pass-By method
- ISO 11819-2:2017 Part 2: The close-proximity method
- ISO/TS 11819-3:2017 Part 3: Reference tyres
- ISO/PAS 11819-4:2013 Part 4: SPB method using backing board
ISO 11821:1997 Acoustics – Measurement of the in situ sound attenuation of a removable screen
ISO 11822:1996 Information and documentation - Extension of the Arabic alphabet coded character set for bibliographic information interchange
ISO 11838:1997 Motorcycle and motorcycle-rider kinematics – Vocabulary
ISO 11841 Road vehicles and internal combustion engines – Filter vocabulary
- ISO 11841-1:2000 Part 1: Definitions of filters and filter components
- ISO 11841-2:2000 Part 2: Definitions of characteristics of filters and their components
ISO 11843 Capability of detection
- ISO 11843-1:1997 Part 1: Terms and definitions
- ISO 11843-2:2000 Part 2: Methodology in the linear calibration case
- ISO 11843-3:2003 Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
- ISO 11843-4:2003 Part 4: Methodology for comparing the minimum detectable value with a given value
- ISO 11843-5:2008 Part 5: Methodology in the linear and non-linear calibration cases
- ISO 11843-6:2013 Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
- ISO 11843-7:2012 Part 7: Methodology based on stochastic properties of instrumental noise
ISO 11866 Milk and milk products – Enumeration of presumptive Escherichia coli
- ISO 11866-1:2005 Part 1: Most probable number technique using 4-methylumbelliferyl-beta-D-glucuronide (MUG)
- ISO 11866-2:2005 Part 2: Colony-count technique at 44 degrees C using membranes
ISO 11886:2002 Building construction machinery and equipment – Pile driving and extracting equipment – Terminology and commercial specifications
ISO/TS 11888:2017 Nanotechnologies – Characterization of multiwall carbon nanotubes – Mesoscopic shape factors
ISO/IEC 11889 Information technology - Trusted platform module library
- ISO/IEC 11889-1:2015 Part 1: Architecture
- ISO/IEC 11889-2:2015 Part 2: Structures
- ISO/IEC 11889-3:2015 Part 3: Commands
- ISO/IEC 11889-4:2015 Part 4: Supporting Routines
ISO 11898 Road vehicles – Controller area network (CAN)
ISO 11904 Acoustics – Determination of sound immission from sound sources placed close to the ear
- ISO 11904-1:2002 Part 1: Technique using a microphone in a real ear (MIRE technique)
- ISO 11904-2:2004 Part 2: Technique using a manikin
ISO 11929:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application
ISO 11930:2012 Cosmetics – Microbiology – Evaluation of the antimicrobial protection of a cosmetic product
ISO/TS 11931:2012 Nanotechnologies – Nanoscale calcium carbonate in powder form – Characteristics and measurement
ISO/TS 11937:2012 Nanotechnologies – Nanoscale titanium dioxide in powder form – Characteristics and measurement
ISO 11940:1998 Information and documentation - Transliteration of Thai
- ISO 11940-2:2007 Information and documentation - Transliteration of Thai characters into Latin characters - Part 2: Simplified transcription of Thai language
ISO/TR 11941:1996 Information and documentation - Transliteration of Korean script into Latin characters [Withdrawn, no replacement]
ISO 11957:1996 Acoustics – Determination of sound insulation performance of cabins – Laboratory and in situ measurements
ISO/IEC 11976:2008 Information technology - Data interchange on 130 mm rewritable and write-once-read-many ultra density optical (UDO) disk cartridges - Capacity: 60 Gbytes per cartridge - Second generation
ISO 11978:2017 Ophthalmic optics – Contact lenses and contact lens care products – Labelling
ISO 11979 Ophthalmic implants - Intraocular lenses
- ISO 11979-1:2012 Part 1: Vocabulary
- ISO 11979-2:2014 Part 2: Optical properties and test methods
- ISO 11979-3:2012 Part 3: Mechanical properties and test methods
- ISO 11979-4:2008 Part 4: Labelling and information
- ISO 11979-5:2006 Part 5: Biocompatibility
- ISO 11979-6:2014 Part 6: Shelf-life and transport stability testing
- ISO 11979-7:2014 Part 7: Clinical investigations
- ISO 11979-8:2017 Part 8: Fundamental requirements
- ISO 11979-9:2006 Part 9: Multifocal intraocular lenses
- ISO 11979-10:2006 Part 10: Phakic intraocular lenses
ISO 11980:2012 Ophthalmic optics – Contact lenses and contact lens care products – Guidance for clinical investigations
ISO 11981:2009 Ophthalmic optics – Contact lenses and contact lens care products – Determination of physical compatibility of contact lens care products with contact lenses
ISO 11986:2010 Ophthalmic optics – Contact lenses and contact lens care products – Determination of preservative uptake and release
ISO 11987:2012 Ophthalmic optics – Contact lenses – Determination of shelf-life
ISO/IEC 11989:2010 Information technology - iSCSI Management API
ISO 11990 Lasers and laser-related equipment – Determination of laser resistance of tracheal tubes
- ISO 11990-1:2011 Part 1: Tracheal tube shaft
- ISO 11990-2:2010 Part 2: Tracheal tube cuffs
ISO/TR 11991:1995 Guidance on airway management during laser surgery of upper airway
ISO 11994:1997 Cranes – Availability – Vocabulary

ISO 12000 – ISO 12999

ISO 12001:1996 Acoustics – Noise emitted by machinery and equipment – Rules for the drafting and presentation of a noise test code
ISO 12005:2003 Lasers and laser-related equipment – Test methods for laser beam parameters – Polarization
ISO 12006 Building construction – Organization of information about construction works
ISO/TS 12025:2012 Nanomaterials – Quantification of nano-object release from powders by generation of aerosols
ISO/IEC 12042:1993 Information technology – Data compression for information interchange – Binary arithmetic coding algorithm
ISO 12052:2017 Health informatics – Digital imaging and communication in medicine (DICOM) including workflow and data management
ISO 12083:1994 Information and documentation - Electronic manuscript preparation and markup
ISO 12085:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters
ISO/IEC 12087 Information technology - Computer graphics and image processing - Image Processing and Interchange (IPI) - Functional specification
- ISO/IEC 12087-1:1995 Part 1: Common architecture for imaging
- ISO/IEC 12087-2:1994 Part 2: Programmer's imaging kernel system application programme interface
- ISO/IEC 12087-3:1995 Part 3: Image Interchange Facility (IIF)
- ISO/IEC 12087-5:1998 Part 5: Basic Image Interchange Format (BIIF)
ISO/IEC 12088-4:1995 Information technology - Computer graphics and image processing - Image processing and interchange - Application program interface language bindings
ISO/IEC 12089:1997 Information technology - Computer graphics and image processing - Encoding for the Image Interchange Facility (IIF)
ISO 12100 Safety of machinery – General principles for design – Risk assessment and risk reduction
ISO/IEC 12139 Information technology – Telecommunications and information exchange between systems – Powerline communication (PLC) – High speed PLC medium access control (MAC) and physical layer (PHY)
ISO/IEC 12097:2002 Road vehicles -- Airbag components
- ISO/IEC 12139-1:2009 Part 1: General requirements
ISO 12165:2000 Tools for moulding - Components of compression and injection moulds and diecasting dies - Terms and symbols
ISO 12176 Plastics pipes and fittings – Equipment for fusion jointing polyethylene systems
- ISO 12176-3:2011 Part 3: Operator's badge
ISO 12179:2000 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Calibration of contact (stylus) instruments
ISO 12180 Geometrical product specifications (GPS) - Cylindricity
- ISO 12180-1:2011 Part 1: Vocabulary and parameters of cylindrical form
- ISO 12180-2:2011 Part 2: Specification operators
ISO 12181 Geometrical product specifications (GPS) - Roundness
- ISO 12181-1:2011 Part 1: Vocabulary and parameters of roundness
- ISO 12181-2:2011 Part 2: Specification operators
ISO/IEC TR 12182:2015 Systems and software engineering - Framework for categorization of IT systems and software, and guide for applying it
ISO 12188 Tractors and machinery for agriculture and forestry – Test procedures for positioning and guidance systems in agriculture
- ISO 12188-1:2010 Part 1: Dynamic testing of satellite-based positioning devices
- ISO 12188-2:2012 Part 2: Testing of satellite-based auto-guidance systems during straight and level travel
ISO 12189:2008 Implants for surgery – Mechanical testing of implantable spinal devices – Fatigue test method for spinal implant assemblies using an anterior support
ISO 12199:2000 Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet
ISO/IEC 12207 Systems and software engineering – Software life cycle processes
ISO 12231:2012 Photography - Electronic still picture imaging - Vocabulary
ISO 12242:2012 Measurement of fluid flow in closed conduits – Ultrasonic transit-time meters for liquid
ISO/IEC 12246:1993 Information technology – 8 mm wide magnetic tape cartridge dual azimuth format for information interchange – Helical scan recording
ISO/IEC 12247:1993 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS format using 60 m and 90 m length tapes
ISO/IEC 12248:1993 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DATA/DAT-DC format using 60 m and 90 m length tapes
ISO/TR 12300:2014 Health informatics – Principles of mapping between terminological systems
ISO/TR 12309:2009 Health informatics – Guidelines for terminology development organizations
ISO/TR 12310:2015 Health informatics – Principles and guidelines for the measurement of conformance in the implementation of terminological systems
ISO 12353 Road vehicles – Traffic accident analysis
- ISO 12353-1:2002 Part 1: Vocabulary
ISO/IEC TR 12382:1992 Permuted index of the vocabulary of information technology
ISO 12417 Cardiovascular implants and extracorporeal systems – Vascular device-drug combination products
- ISO 12417-1:2015 Part 1: General requirements
ISO 12543 Glass in building – Laminated glass and laminated safety glass
- ISO 12543-1:2011 Part 1: Definitions and description of component parts
ISO 12615:2004 Bibliographic references and source identifiers for terminology work
ISO 12616:2002 Translation-oriented terminography
ISO 12625 Tissue paper and tissue products
- ISO 12625-1:2011 Part 1: General guidance on terms
ISO 12637 Graphic technology - Vocabulary
- ISO 12637-1:2006 Part 1: Fundamental terms
- ISO 12637-2:2008 Part 2: Prepress terms
- ISO 12637-3:2009 Part 3: Printing terms
- ISO 12637-4:2008 Part 4: Postpress terms
ISO 12639:2004 Graphic technology – Prepress digital data exchange – Tag image file format for image technology (TIFF/IT)
ISO 12640 Graphic technology - Prepress digital data exchange
- ISO 12640-1:1997 Part 1: CMYK standard colour image data (CMYK/SCID)
- ISO 12640-2:2004 Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID)
- ISO 12640-3:2007 Part 3: CIELAB standard colour image data (CIELAB/SCID)
- ISO 12640-4:2011 Part 4: Wide gamut display-referred standard colour image data [Adobe RGB (1998)/SCID]
- ISO 12640-5:2013 Part 5: Scene-referred standard colour image data (RIMM/SCID)
ISO 12641:1997 Graphic technology – Prepress digital data exchange – Colour targets for input scanner calibration
- ISO 12641-1:2016 Part 1: Colour targets for input scanner calibration
ISO 12642 Graphic technology - Input data for characterization of four-colour process printing
- ISO 12642-1:2011 Part 1: Initial data set
- ISO 12642-2:2006 Part 2: Expanded data set
ISO 12651 Electronic document management - Vocabulary
- ISO 12651-1:2012 Part 1: Electronic document imaging
- ISO 12651-2:2014 Part 2: Workflow management
ISO 12671:2012 Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
ISO 12706:2009 Non-destructive testing - Penetrant testing - Vocabulary
ISO 12707:2016 Non-destructive testing - Magnetic particle testing - Vocabulary
ISO 12716:2001 Non-destructive testing - Acoustic emission inspection - Vocabulary
ISO 12718:2008 Non-destructive testing - Eddy current testing - Vocabulary
ISO 12749 Nuclear energy, nuclear technologies, and radiological protection - Vocabulary
- ISO 12749-2:2013 Part 2: Radiological protection
- ISO 12749-3:2015 Part 3: Nuclear fuel cycle
- ISO 12749-4:2015 Part 4: Dosimetry for radiation processing
ISO 12756:2016 Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary
ISO 12757 Ball point pens and refills
- ISO 12757-2:1998 Part 2: Documentary use (DOC)
ISO 12764:2017 Measurement of fluid flow in closed conduits – Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
ISO/TR 12767:2007 Measurement of fluid flow by means of pressure differential devices – Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167
ISO/TR 12773 Business requirements for health summary records
- ISO/TR 12773-1:2009 Part 1: Requirements
- ISO/TR 12773-2:2009 Part 2: Environmental scan
ISO 12780 Geometrical product specifications (GPS) - Straightness
- ISO 12780-1:2011 Part 1: Vocabulary and parameters of straightness
- ISO 12780-2:2011 Part 2: Specification operators
ISO 12781 Geometrical product specifications (GPS) - Flatness
- ISO 12781-1:2011 Part 1: Vocabulary and parameters of flatness
- ISO 12781-2:2011 Part 2: Specification operators
ISO/IEC 12785 Information technology - Learning, education, and training - Content packaging
- ISO/IEC 12785-1:2009 Part 1: Information model
- ISO/IEC 12785-2:2011 Part 2: XML binding
- ISO/IEC TR 12785-3:2012 Part 3: Best practice and implementation guide
ISO 12789 Reference radiation fields - Simulated workplace neutron fields
- ISO 12789-1:2008 Part 1: Characteristics and methods of production
- ISO 12789-2:2008 Part 2: Calibration fundamentals related to the basic quantities
ISO/TR 12802:2010 Nanotechnologies - Model taxonomic framework for use in developing vocabularies - Core concepts
ISO/TS 12805:2011 Nanotechnologies – Materials specifications – Guidance on specifying nano-objects
ISO 12812 Core banking – Mobile financial services
- ISO 12812-1:2017 Part 1: General framework
- ISO/TS 12812-2:2017 Part 2: Security and data protection for mobile financial services
- ISO/TS 12812-3:2017 Part 3: Financial application lifecycle management
- ISO/TS 12812-4:2017 Part 4: Mobile payments-to-persons
- ISO/TS 12812-5:2017 Part 5: Mobile payments to businesses
ISO 12813:2015 Electronic fee collection – Compliance check communication for autonomous systems
ISO 12836:2015 Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy
ISO/TR 12845:2010 Selected illustrations of fractional factorial screening experiments
ISO 12855:2015 Electronic fee collection – Information exchange between service provision and toll charging
ISO 12858 Optics and optical instruments – Ancillary devices for geodetic instruments
- ISO 12858-1:2014 Part 1: Invar levelling staffs
- ISO 12858-2:1999 Part 2: Tripods
- ISO 12858-3:2005 Part 3: Tribrachs
ISO/TR 12859:2009 Intelligent transport systems – System architecture – Privacy aspects in ITS standards and systems
ISO/IEC TR 12860:2009 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – General
ISO/IEC TR 12861:2009 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Identification and routing
ISO/IEC 12862:2011 Information technology - 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL)
ISO 12865:2006 Ophthalmic instruments – Retinoscopes
ISO 12866:1999 Ophthalmic instruments – Perimeters
ISO 12867:2010 Ophthalmic instruments – Trial frames
ISO/TS 12869:2012 Water quality – Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qPCR)
ISO 12870:2016 Ophthalmic optics – Spectacle frames – Requirements and test methods
ISO/TR 12885:2008 Nanotechnologies – Health and safety practices in occupational settings relevant to nanotechnologies
ISO/TR 12888:2011 Selected illustrations of gauge repeatability and reproducibility studies
ISO 12891 Retrieval and analysis of surgical implants
- ISO 12891-1:2015 Part 1: Retrieval and handling
- ISO 12891-2:2014 Part 2: Analysis of retrieved surgical implants
ISO/TS 12901 Nanotechnologies – Occupational risk management applied to engineered nanomaterials
- ISO/TS 12901-1:2012 Part 1: Principles and approaches
- ISO/TS 12901-2:2014 Part 2: Use of the control banding approach
ISO/IEC 12905:2011 Integrated circuit cards – Enhanced terminal accessibility using cardholder preference interface
ISO 12912:2014 Circular knitting machines – Vocabulary
ISO 12913 Acoustics – Soundscape
- ISO 12913-1:2014 Part 1: Definition and conceptual framework
ISO 12931:2012 Performance criteria for authentication solutions used to combat counterfeiting of material goods
ISO 12944 Paints and varnishes – Corrosion protection of steel structures by protective paint systems
ISO 12967 Health informatics – Service architecture
- ISO 12967-1:2009 Part 1: Enterprise viewpoint
- ISO 12967-2:2009 Part 2: Information viewpoint
- ISO 12967-3:2009 Part 3: Computational viewpoint
ISO 12999 Acoustics – Determination and application of measurement uncertainties in building acoustics
- ISO 12999-1:2014 Part 1: Sound insulation

ISO 13000 – ISO 13999

ISO 13006:2012 Ceramic tiles – Definitions, classification, characteristics and marking
ISO 13007 Ceramic tiles – Grouts and adhesives
- ISO 13007-1:2014 Terms, definitions and specifications for adhesives
- ISO 13007-2:2010 Test methods for adhesives
- ISO 13007-3:2010 Terms, definitions and specifications for grouts
- ISO 13007-4:2013 Test methods for grouts
ISO 13008:2012 Information and documentation - Digital records conversion and migration process
ISO 13009:2015 Tourism and related services – Requirements and recommendations for beach operation
ISO/TR 13014:2012 Nanotechnologies – Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment
ISO/TR 13028:2010 Information and documentation - Implementation guidelines for digitization of records
ISO 13053 Quantitative methods in process improvement - Six Sigma
- ISO 13053-1:2011 Part 1: DMAIC methodology
- ISO 13053-2:2011 Part 2: Tools and techniques
ISO/TR 13054:2012 Knowledge management of health information standards
ISO/TR 13062:2015 Electric mopeds and motorcycles – Terminology and classification
ISO/IEC 13066 Information technology - Interoperability with assistive technology (AT)
- ISO/IEC 13066-1:2011 Part 1: Requirements and recommendations for interoperability
- ISO/IEC TR 13066-2:2016 Part 2: Windows accessibility application programming interface (API)
- ISO/IEC TR 13066-3:2012 Part 3: IAccessible2 accessibility application programming interface (API)
- ISO/IEC TR 13066-4:2015 Part 4: Linux/UNIX graphical environments accessibility API
- ISO/IEC TR 13066-6:2014 Part 6: Java accessibility application programming interface (API)
ISO 13078 Dentistry - Dental furnace
- ISO 13078-2:2016 Part 2: Test method for evaluation of furnace programme via firing glaze
ISO 13102:2012 Geometrical product specifications (GPS) – Dimensional measuring equipment: Electronic digital-indicator gauge – Design and metrological characteristics
ISO 13105 Building construction machinery and equipment – Machinery for concrete surface floating and finishing
- ISO 13105-1:2014 Part 1: Terms and commercial specifications
ISO 13111 Intelligent transport systems (ITS) – The use of personal ITS station to support ITS service provision for travellers
- ISO 13111-1:2017 Part 1: General information and use case definitions
ISO 13119:2012 Health informatics – Clinical knowledge resources – Metadata
ISO 13120:2013 Health informatics – Syntax to represent the content of healthcare classification systems – Classification Markup Language (ClaML)
ISO/TR 13121:2011 Nanotechnologies – Nanomaterial risk evaluation
ISO 13127:2012 Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems
ISO/TR 13128:2012 Health Informatics – Clinical document registry federation
ISO/TS 13131:2014 Health informatics – Telehealth services – Quality planning guidelines
ISO/TS 13136:2012 Microbiology of food and animal feed – Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens – Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, O111, O26, O103 and O145 serogroups
ISO 13140 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to ISO 13141
- ISO 13140-1:2016 Part 1: Test suite structure and test purposes
- ISO 13140-2:2016 Part 2: Abstract test suite
ISO 13141:2015 Electronic fee collection – Localisation augmentation communication for autonomous systems
ISO 13142:2015 Electro-optical systems – Cavity ring-down technique for high-reflectance measurement
ISO 13143 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to ISO 12813
- ISO 13143-1:2016 Part 1: Test suite structure and test purposes
- ISO 13143-2:2016 Part 2: Abstract test suite
ISO/TR 13154:2017 Medical electrical equipment – Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph
ISO/IEC 13156:2011 Information technology – Telecommunications and information exchange between systems – High rate 60 GHz PHY, MAC and PALs
ISO/IEC 13157 Information technology – Telecommunications and information exchange between systems – NFC Security
- ISO/IEC 13157-1:2014 Part 1: NFC-SEC NFCIP-1 security services and protocol
- ISO/IEC 13157-2:2016 Part 2: NFC-SEC cryptography standard using ECDH and AES
- ISO/IEC 13157-3:2016 Part 3: NFC-SEC cryptography standard using ECDH-256 and AES-GCM
- ISO/IEC 13157-4:2016 Part 4: NFC-SEC entity authentication and key agreement using asymmetric cryptography
- ISO/IEC 13157-5:2016 Part 5: NFC-SEC entity authentication and key agreement using symmetric cryptography
ISO 13160:2012 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting
ISO 13161:2011 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry
ISO 13162:2011 Water quality - Determination of carbon 14 activity - Liquid scintillation counting method
ISO 13163:2013 Water quality - Lead-210 - Test method using liquid scintillation counting
ISO 13164 Water quality - Radon-222
- ISO 13164-1:2013 Part 1: General principles
- ISO 13164-2:2013 Part 2: Test method using gamma-ray spectrometry
- ISO 13164-3:2013 Part 3: Test method using emanometry
- ISO 13164-4:2015 Part 4: Test method using two-phase liquid scintillation counting
ISO 13165 Water quality - Radium-226
- ISO 13165-1:2013 Part 1: Test method using liquid scintillation counting
- ISO 13165-2:2014 Part 2: Test method using emanometry
- ISO 13165-3:2016 Part 3: Test method using coprecipitation and gamma-spectrometry
ISO 13167:2015 Water quality - Plutonium, americium, curium and neptunium - Test method using alpha spectrometry
ISO/IEC 13170:2009 Information technology - 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD re-recordable disk for dual layer (DVD-RW for DL)
ISO 13175 Implants for surgery – Calcium phosphates
- ISO 13175-3:2012 Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes
ISO 13179 Implants for surgery – Plasma-sprayed unalloyed titanium coatings on metallic surgical implants
- ISO 13179-1:2014 Part 1: General requirements
ISO 13183:2012 Intelligent transport systems – Communications access for land mobiles (CALM) – Using broadcast communications
ISO 13184 Intelligent transport systems (ITS) – Guidance protocol via personal ITS station for advisory safety systems
- ISO/TR 13184-1:2013 Part 1: General information and use case definitions
- ISO 13184-2:2016 Part 2: Road guidance protocol (RGP) requirements and specification
ISO 13185 Intelligent transport systems – Vehicle interface for provisioning and support of ITS services
- ISO/TR 13185-1:2012 Part 1: General information and use case definition
- ISO 13185-2:2015 Part 2: Unified gateway protocol (UGP) requirements and specification for vehicle ITS station gateway (V-ITS-SG) interface
ISO/IEC 13187:2011 Information technology - Server management command line protocol (SM CLP) specification
ISO/TR 13195:2015 Selected illustrations of response surface method - Central composite design
ISO 13200:1995 Cranes - Safety signs and hazard pictorials - General principles
ISO 13203:2005 Chains, sprockets and accessories - List of equivalent terms
ISO/IEC 13210:1999 Information technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX Standards
ISO/IEC 13211 Information technology - Programming languages - Prolog
- ISO/IEC 13211-1:1995 Part 1: General core
- ISO/IEC 13211-2:2000 Part 2: Modules
ISO 13212:2014 Ophthalmic optics – Contact lens care products – Guidelines for determination of shelf-life
ISO/IEC 13213:1994 Information technology - Microprocessor systems - Control and Status Registers (CSR) Architecture for microcomputer buses
ISO 13225:2012 Geometrical product specifications (GPS) – Dimensional measuring equipment; Height gauges – Design and metrological characteristics
ISO/IEC TR 13233:1995 Information technology - Interpretation of accreditation requirements in ISO/IEC Guide 25 - Accreditation of Information Technology and Telecommunications testing laboratories for software and protocol testing services
ISO/IEC 13235 Information technology - Open Distributed Processing - Trading function
- ISO/IEC 13235-1:1998 Specification
- ISO/IEC 13235-3:1998 Part 3: Provision of Trading Function using OSI Directory service
ISO/IEC 13236:1998 Information technology - Quality of service: Framework
ISO/IEC 13238 Information technology – Data Management
- ISO/IEC 13238-3:1998 Part 3: IRDS export/import facility
ISO/IEC 13239:2002 Information technology – Telecommunications and information exchange between systems – High-level data link control (HDLC) procedures
ISO/IEC 13240:2001 Information technology - Document description and processing languages - Interchange Standard for Multimedia Interactive Documents (ISMID)
ISO/IEC 13241:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Route Restriction Class additional network feature
ISO/IEC 13242:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Route Restriction Class additional network feature
ISO/IEC 13244:1998 Information technology - Open Distributed Management Architecture
ISO/IEC 13246:1997 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Signalling ATM adaptation layer
ISO/IEC 13247:1997 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Basic call/connection control
ISO/IEC 13249 Information technology – Database languages – SQL multimedia and application
- ISO/IEC 13249-1:2016 Part 1: Framework
- ISO/IEC 13249-2:2003 Part 2: Full-Text
- ISO/IEC 13249-3:2016 Part 3: Spatial
- ISO/IEC 13249-5:2003 Part 5: Still image
- ISO/IEC 13249-6:2006 Part 6: Data mining
- ISO/IEC TS 13249-7:2013 Part 7: History
ISO/IEC 13250 Information technology – Topic Maps^{[Note 3]}
ISO/IEC 13251:2004 Collection of graphical symbols for office equipment
ISO/IEC 13252:1999 Information technology – Enhanced communications transport service definition
ISO 13261 Sound power rating of air-conditioning and air-source heat pump equipment
- ISO 13261-1:1998 Part 1: Non-ducted outdoor equipment
- ISO 13261-2:1998 Part 2: Non-ducted indoor equipment
ISO 13274:2013 Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs
ISO/TS 13278:2011 Nanotechnologies – Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
ISO 13289:2011 Recreational diving services – Requirements for the conduct of snorkelling excursions
ISO 13293:2012 Recreational diving services – Requirements for gas blender training programmes
ISO 13300 Sensory analysis – General guidance for the staff of a sensory evaluation laboratory
- ISO 13300-1:2006 Part 1: Staff responsibilities
- ISO 13300-2:2006 Part 2: Recruitment and training of panel leaders
ISO 13304 Radiological protection - Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation
- ISO 13304-1:2013 Part 1: General principles
ISO 13307:2013 Microbiology of food and animal feed – Primary production stage – Sampling techniques
ISO 13320:2009 Particle size analysis - Laser diffraction methods
ISO 13325:2003 Tyres – Coast-by methods for measurement of tyre-to-road sound emission
ISO/TR 13329:2012 Nanomaterials – Preparation of material safety data sheet (MSDS)
ISO 13332:2000 Reciprocating internal combustion engines – Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
ISO/IEC 13346 Information technology – Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange
- ISO/IEC 13346-1:1995 Part 1: General
- ISO/IEC 13346-2:1999 Part 2: Volume and boot block recognition
- ISO/IEC 13346-3:1999 Part 3: Volume structure
- ISO/IEC 13346-4:1999 Part 4: File structure
- ISO/IEC 13346-5:1995 Part 5: Record structure
ISO 13347 Industrial fans – Determination of fan sound power levels under standardized laboratory conditions
- ISO 13347-1:2004 Part 1: General overview
- ISO 13347-2:2004 Part 2: Reverberant room method
- ISO 13347-3:2004 Part 3: Enveloping surface methods
- ISO 13347-4:2004 Part 4: Sound intensity method
ISO 13349:2010 Fans - Vocabulary and definitions of categories
ISO 13356:2015 Implants for surgery – Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
ISO 13370 Thermal performance of buildings – Heat transfer via the ground – Calculation methods
ISO 13372:2012 Condition monitoring and diagnostics of machines - Vocabulary
ISO 13373 Condition monitoring and diagnostics of machines – Vibration condition monitoring
- ISO 13373-1:2002 Part 1: General procedures
- ISO 13373-2:2016 Part 2: Processing, analysis and presentation of vibration data
- ISO 13373-3:2015 Part 3: Guidelines for vibration diagnosis
- ISO 13373-7:2017 Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
- ISO 13373-9:2017 Part 9: Diagnostic techniques for electric motors
ISO 13374 Condition monitoring and diagnostics of machine systems – Data processing, communication and presentation^{[Note 3]}
- ISO 13374-1:2003 Part 1: General guidelines
- ISO 13374-2:2007 Part 2: Data processing
- ISO 13374-3:2012 Part 3: Communication
- ISO 13374-4:2015 Part 4: Presentation
ISO 13379 Condition monitoring and diagnostics of machines – Data interpretation and diagnostics techniques
- ISO 13379-1:2012 Part 1: General guidelines
- ISO 13379-2:2015 Part 2: Data-driven applications
ISO 13381 Condition monitoring and diagnostics of machines – Prognostics
- ISO 13381-1:2015 Part 1: General guidelines
ISO 13385 Geometrical product specifications (GPS) – Dimensional measuring equipment
- ISO 13385-1:2011 Part 1: Callipers; Design and metrological characteristics
- ISO 13385-2:2011 Part 2: Calliper depth gauges; Design and metrological characteristics
ISO 13399 Cutting tool data representation and exchange
- ISO 13399-1:2006 Part 1: Overview, fundamental principles and general information model
- ISO/TS 13399-2:2014 Part 2: Reference dictionary for the cutting items
- ISO/TS 13399-3:2014 Part 3: Reference dictionary for tool items
- ISO/TS 13399-4:2014 Part 4: Reference dictionary for adaptive items
- ISO/TS 13399-5:2014 Part 5: Reference dictionary for assembly items
- ISO/TS 13399-50:2013 Part 50: Reference dictionary for reference systems and common concepts
- ISO/TS 13399-60:2014 Part 60: Reference dictionary for connection systems
- ISO/TS 13399-70:2016 Part 70: Graphical data layout - Layer setting for tool layout
- ISO/TS 13399-71:2016 Part 71: Graphical data layout - Creation of documents for standardized data exchange: Graphical product information
- ISO/TS 13399-72:2016 Part 72: Creation of documents for the standardized data exchange - Definition of properties for drawing header and their XML-data exchange
- ISO/TS 13399-80:2017 Part 80: Creation and exchange of 3D models - Overview and principles
- ISO/TS 13399-100:2008 Part 100: Definitions, principles and methods for reference dictionaries
- ISO/TS 13399-150:2008 Part 150: Usage guidelines
- ISO/TS 13399-201:2014 Part 201: Creation and exchange of 3D models - Regular inserts
- ISO/TS 13399-202:2015 Part 202: Creation and exchange of 3D models - Irregular inserts
- ISO/TS 13399-203:2015 Part 203: Creation and exchange of 3D models - Replaceable inserts for drilling
- ISO/TS 13399-204:2016 Part 204: Creation and exchange of 3D models - Inserts for reaming
- ISO/TS 13399-301:2013 Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
- ISO/TS 13399-302:2013 Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools
- ISO/TS 13399-303:2016 Part 303: Creation and exchange of 3D models - Solid end mills
- ISO/TS 13399-304:2016 Part 304: Creation and exchange of 3D models - Solid milling cutters with arbor hole
- ISO/TS 13399-305:2017 Part 305: Creation and exchange of 3D models - Modular tooling systems with adjustable cartridges for boring
- ISO/TS 13399-307:2016 Part 307: Creation and exchange of 3D models - End mills for indexable inserts
- ISO/TS 13399-308:2016 Part 308: Creation and exchange of 3D models - Milling cutters with arbor hole for indexable inserts
- ISO/TS 13399-309:2016 Part 309: Creation and exchange of 3D models - Tool holders for indexable inserts
- ISO/TS 13399-310:2017 Part 310: Creation and exchange of 3D models - Turning tools with carbide tips
- ISO/TS 13399-311:2016 Part 311: Creation and exchange of 3D models - Solid reamers
- ISO/TS 13399-312:2016 Part 312: Creation and exchange of 3D models - Reamers for indexable inserts
- ISO/TS 13399-401:2016 Part 401: Creation and exchange of 3D models - Converting, extending and reducing adaptive items
- ISO/TS 13399-405:2016 Part 405: Creation and exchange of 3D models - Collets
ISO 13402:1995 Surgical and dental hand instruments – Determination of resistance against autoclaving, corrosion and thermal exposure
ISO/IEC 13403:1995 Information technology - Information interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the CCS method
ISO 13404:2007 Prosthetics and orthotics – Categorization and description of external orthoses and orthotic components
ISO 13405 Prosthetics and orthotics – Classification and description of prosthetic components
- ISO 13405-1:2015 Part 1: Classification of prosthetic components
- ISO 13405-2:2015 Part 2: Description of lower limb prosthetic components
- ISO 13405-3:2015 Part 3: Description of upper limb prosthetic components
ISO 13406 Ergonomic requirements for work with visual displays based on flat panels
- ISO 13406-2:2001 Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14]
ISO 13407:1999 Human-centred design processes for interactive systems (This standard has been revised by ISO 9241-210:2010)
ISO/IEC 13421:1993 Information technology – Data Interchange on 12,7 mm, 48-track magnetic tape cartridges – DLT 1 format
ISO/IEC 13422:1994 Information technology – Data interchange on 90 mm Flexible Disk Cartridges 10 MByte capacity using sector servo tracking – ISO Type 304
ISO 13444:2012 Technical product documentation (TPD) – Dimensioning and indication of knurling
ISO 13448 Acceptance sampling procedures based on the allocation of priorities principle (APP)
- ISO 13448-1:2005 Part 1: Guidelines for the APP approach
- ISO 13448-2:2004 Part 2: Coordinated single sampling plans for acceptance sampling by attributes
ISO 13450 Photography – 110-size cartridge, film and backing paper – Dimensions
ISO/TS 13471 Acoustics – Temperature influence on tyre/road noise measurement
- ISO/TS 13471-1:2017 Part 1: Correction for temperature when testing with the CPX method
ISO 13472 Acoustics – Measurement of sound absorption properties of road surfaces in situ
- ISO 13472-1:2002 Part 1: Extended surface method
- ISO 13472-2:2010 Part 2: Spot method for reflective surfaces
ISO 13473 Characterization of pavement texture by use of surface profiles
- ISO 13473-1:1997 Part 1: Determination of Mean Profile Depth
- ISO 13473-2:2002 Part 2: Terminology and basic requirements related to pavement texture profile analysis
- ISO 13473-3:2002 Part 3: Specification and classification of profilometers
- ISO/TS 13473-4:2008 Part 4: Spectral analysis of surface profiles
- ISO 13473-5:2009 Part 5: Determination of megatexture
ISO 13474:2009 Acoustics – Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment
ISO 13475 Acoustics – Stationary audible warning devices used outdoors
- ISO 13475-1:1999 Part 1: Field measurements for determination of sound emission quantities
- ISO/TS 13475-2:2000 Part 2: Precision methods for determination of sound emission quantities
ISO/IEC 13481:1993 Information technology - Data interchange on 130 mm optical disk cartridges - Capacity: 1 gigabyte per cartridge
ISO 13482:2014 Robots and robotic devices – Safety requirements for personal care robots
ISO 13485:2016 Medical devices – Quality management systems – Requirements for regulatory purposes
ISO/IEC 13490 Information technology – Volume and file structure of read-only and write-once compact disk media for information interchange
- ISO/IEC 13490-1:1995 Part 1: General
- ISO/IEC 13490-2:1995 Part 2: Volume and file structure
ISO 13491 Financial services – Secure cryptographic devices (retail)
- ISO 13491-1:2016 Part 1: Concepts, requirements and evaluation methods
- ISO 13491-2:2017 Part 2: Security compliance checklists for devices used in financial transactions
ISO 13492:2007 Financial services – Key management related data element – Application and usage of ISO 8583 data elements 53 and 96
ISO/TR 13519:2012 Guidance on the development and use of ISO statistical publications supported by software
ISO/IEC 13522 Information technology - Coding of multimedia and hypermedia information
- ISO/IEC 13522-1:1997 Part 1: MHEG object representation - Base notation (ASN.1)
- ISO/IEC 13522-3:1997 Part 3: MHEG script interchange representation
- ISO/IEC 13522-4:1996 Part 4: MHEG registration procedure
- ISO/IEC 13522-5:1997 Part 5: Support for base-level interactive applications
- ISO/IEC 13522-6:1998 Part 6: Support for enhanced interactive applications
- ISO/IEC 13522-7:2001 Part 7: Interoperability and conformance testing for ISO/IEC 13522-5
- ISO/IEC 13522-8:2001 Part 8: XML notation for ISO/IEC 13522-5
ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 13539:1998 Earth-moving machinery – Trenchers – Definitions and commercial specifications
ISO/IEC 13549:1993 Information technology - Data interchange on 130 mm optical disk cartridges - Capacity: 1,3 gigabytes per cartridge
ISO 13550:2002 Hydrometric determinations – Flow measurements in open channels using structures – Use of vertical underflow gates and radial gates
ISO 13559:2002 Butter, fermented milks and fresh cheese – Enumeration of contaminating microorganisms – Colony-count technique at 30 degrees C
ISO/IEC 13560:2009 Information technology – Telecommunications and information exchange between systems – Procedure for the registration of assigned numbers for ISO/IEC 26907 and ISO/IEC 26908
ISO/IEC TR 13561:1994 Information technology - Guidelines for effective use of optical disk cartridges conforming to ISO/IEC 10090
ISO 13565 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties
- ISO 13565-1:1996 Part 1: Filtering and general measurement conditions
- ISO 13565-2:1996 Part 2: Height characterization using the linear material ratio curve
- ISO 13565-3:1998 Part 3: Height characterization using the material probability curve
ISO 13567 Technical product documentation – Organization and naming of layers for CAD
ISO/IEC 13568:2002 Information Technology – Z formal specification notation – Syntax, type system and semantics
ISO/TR 13569:2005 Financial services – Information security guidelines
ISO 13574:2015 Industrial furnaces and associated processing equipment - Vocabulary
ISO/IEC 13575:1995 Information technology – Telecommunications and information exchange between systems – 50-pole interface connector mateability dimensions and contact number assignments
ISO 13577 Industrial furnaces and associated processing equipment - Safety
- ISO 13577-1:2016 Part 1: General requirements
- ISO 13577-2:2014 Part 2: Combustion and fuel handling systems
- ISO 13577-3:2016 Part 3: Generation and use of protective and reactive atmosphere gases
- ISO 13577-4:2014 Part 4: Protective systems
ISO 13579 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency
- ISO 13579-1:2013 General methodology
- ISO 13579-2:2013 Reheating furnaces for steel
- ISO 13579-3:2013 Batch-type aluminium melting furnaces
- ISO 13579-4:2013 Furnaces with protective or reactive atmosphere
ISO/TS 13582:2015 Health informatics – Sharing of OID registry information
ISO 13586:2000 Plastics - Determination of fracture toughness (GIC and KIC) – Linear elastic fracture mechanics (LEFM) approach
ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
ISO/IEC TR 13594:1995 Information technology – Lower layers security
ISO 13606 Health informatics – Electronic health record communication
- ISO 13606-1:2008 Part 1: Reference model
- ISO 13606-2:2008 Part 2: Archetype interchange specification
- ISO 13606-3:2009 Part 3: Reference archetypes and term lists
- ISO/TS 13606-4:2009 Part 4: Security
- ISO 13606-5:2010 Part 5: Interface specification
ISO 13611:2014 Interpreting - Guidelines for community interpreting
ISO/IEC 13614:1995 Information technology - Interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the SSF method
ISO 13616 Financial services – International bank account number (IBAN)
ISO 13628 Petroleum and natural gas industries – Design and operation of subsea production systems
- ISO 13628-1:2005 Part 1: General requirements and recommendations
- ISO 13628-2:2006 Part 2: Unbonded flexible pipe systems for subsea and marine applications
- ISO 13628-3:2000 Part 3: Through flowline (TFL) systems
- ISO 13628-4:2010 Part 4: Subsea wellhead and tree equipment
- ISO 13628-5:2009 Part 5: Subsea umbilicals
- ISO 13628-6:2006 Part 6: Subsea production control systems
- ISO 13628-7:2005 Part 7: Completion/workover riser systems
- ISO 13628-8:2002 Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems
- ISO 13628-9:2000 Part 9: Remotely Operated Tool (ROT) intervention systems
- ISO 13628-10:2005 Part 10: Specification for bonded flexible pipe
- ISO 13628-11:2007 Part 11: Flexible pipe systems for subsea and marine applications
- ISO 13628-15:2011 Part 15: Subsea structures and manifolds
ISO/IEC 13642:1999 Information technology – Elements of management information related to the OSI Physical Layer
ISO 13653:1996 Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field
ISO 13666:2012 Ophthalmic optics - Spectacle lenses - Vocabulary
ISO/IEC 13673:2000 Information technology - Document processing and related communication - Conformance testing for Standard Generalized Markup Language (SGML) systems
ISO 13687 Tourism and related services – Yacht harbours
- ISO 13687-1:2017 Part 1: Minimum requirements for basic service level harbours
- ISO 13687-2:2017 Part 2: Minimum requirements for intermediate service level harbours
- ISO 13687-3:2017 Part 3: Minimum requirements for high service level harbours
ISO 13694:2015 Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power (energy) density distribution
ISO 13695:2004 Optics and photonics – Lasers and laser-related equipment – Test methods for the spectral characteristics of lasers
ISO 13696:2002 Optics and optical instruments – Test methods for radiation scattered by optical components
ISO 13697:2006 Optics and photonics – Lasers and laser-related equipment – Test methods for specular reflectance and regular transmittance of optical laser components
ISO 13702 Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines
ISO/IEC 13712 Information technology – Remote Operations
- ISO/IEC 13712-1:1995 Concepts, model and notation
- ISO/IEC 13712-2:1995 OSI realizations – Remote Operations Service Element (ROSE) service definition
- ISO/IEC 13712-3:1995 OSI realizations – Remote Operations Service Element (ROSE) protocol specification
ISO/IEC 13714:1995 Information technology – Document processing and related communication – User interface to telephone-based services – Voice messaging applications
ISO 13715:2017 Technical product documentation—Edges of undefined shape—Indication and dimensioning
ISO/IEC 13719 Information technology - Portable Common Tool Environment (PCTE)
- ISO/IEC 13719-1:1998 Part 1: Abstract specification
- ISO/IEC 13719-2:1998 Part 2: C programming language binding
- ISO/IEC 13719-3:1998 Part 3: Part 3: Ada programming language binding
- ISO/IEC 13719-4:1998 Part 4: IDL binding (Interface Definition Language)
ISO 13720:2010 Meat and meat products – Enumeration of presumptive Pseudomonas spp.
ISO 13722:2017 Microbiology of the food chain – Enumeration of Brochothrix spp. – Colony-count technique
ISO 13731:2001 Ergonomics of the thermal environment - Vocabulary and symbols
ISO 13732 Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces
- ISO 13732-1:2006 Part 1: Hot surfaces
- ISO/TS 13732-2:2001 Part 2: Human contact with surfaces at moderate temperature
ISO/IEC 13751:2001 Information technology - Programming languages, their environments and system software interfaces - Programming language Extended APL
ISO 13766:2006 Earth-moving machinery – Electromagnetic compatibility
ISO 13779 Implants for surgery – Hydroxyapatite
- ISO 13779-2:2008 Part 2: Coatings of hydroxyapatite
- ISO 13779-3:2008 Part 3: Chemical analysis and characterization of crystallinity and phase purity
- ISO 13779-4:2002 Part 4: Determination of coating adhesion strength
- ISO 13779-6:2015 Part 6: Powders
ISO 13781:2017 Implants for surgery – Homopolymers, copolymers and blends on poly(lactide) – In vitro degradation testing
ISO 13782:1996 Implants for surgery – Metallic materials – Unalloyed tantalum for surgical implant applications
ISO/IEC 13800:1996 Information technology - Procedure for the registration of identifiers and attributes for volume and file structure
ISO 13810:2015 Tourism services – Industrial tourism – Service provision
ISO/TS 13811:2015 Tourism and related services – Guidelines on developing environmental specifications for accommodation establishments
ISO/IEC 13816:2007 Information technology - Programming languages, their environments and system software interfaces - Programming language ISLISP
ISO/IEC 13817 Information technology - Programming languages, their environments and system software interfaces - Vienna Development Method - Specification Language
- ISO/IEC 13817-1:1996 Part 1: Base language
ISO/IEC 13818 Information technology – Generic coding of moving pictures and associated audio information
ISO/TS 13830:2013 Nanotechnologies – Guidance on voluntary labelling for consumer products containing manufactured nano-objects
ISO 13837 Road vehicles – Safety glazing materials – Method for the determination of solar transmittance
ISO/IEC TR 13841:1995 Information technology - Guidance on measurement techniques for 90 mm optical disk cartridges
ISO/IEC 13842:1995 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 2 Gbytes per cartridge
ISO 13843:2017 Water quality – Requirements for establishing performance characteristics of quantitative microbiological methods
ISO 13849 Safety of machinery – Safety related parts of control systems
ISO 13850:2015 Safety of machinery – Emergency stop function – Principles for design
ISO 13854:2017 Safety of machinery – Minimum gaps to avoid crushing of parts of the human body
ISO 13855:2010 Safety of machinery – Positioning of safeguards with respect to the approach speeds of parts of the human body
ISO 13860:2016 Machinery for forestry – Forwarders – Terms, definitions and commercial specifications
ISO 13861:2000 Machinery for forestry – Wheeled skidders – Terms, definitions and commercial specifications
ISO 13862:2000 Machinery for forestry – Feller-bunchers – Terms, definitions and commercial specifications
ISO/IEC 13863:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Path replacement additional network feature
ISO/IEC 13864:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Name identification supplementary services
ISO/IEC 13865:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Transfer supplementary service
ISO/IEC 13866:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call completion supplementary services
ISO/IEC 13868:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Name identification supplementary services
ISO/IEC 13869:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Transfer supplementary service
ISO/IEC 13870:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Completion supplementary services
ISO/IEC 13871:1995 Information technology – Telecommunications and information exchange between systems – Private telecommunications networks – Digital channel aggregation
ISO/IEC 13872:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Diversion supplementary services
ISO/IEC 13873:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Diversion supplementary services
ISO/IEC 13874:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Path Replacement additional network feature
ISO/IEC 13886:1996 Information technology - Language-Independent Procedure Calling (LIPC)
ISO/IEC 13888 Information technology - Security techniques - Non-repudiation
- ISO/IEC 13888-1:2009 Part 1: General
- ISO/IEC 13888-2:2010 Part 2: Mechanisms using symmetric
- ISO/IEC 13888-3:2009 Part 3: Mechanisms using asymmetric techniques
ISO 13920:1996 Welding – General tolerances for welded constructions – Dimensions for lengths and angles – Shape and position
ISO/IEC 13923:1996 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-2 format using 120 m length tape
ISO 13926 Pen systems
- ISO 13926-1:2004 Part 1: Glass cylinders for pen-injectors for medical use
- ISO 13926-2:2011 Part 2: Plunger stoppers for pen-injectors for medical use
- ISO 13926-3:2012 Part 3: Seals for pen-injectors for medical use
ISO 13940:2015 Health informatics – System of concepts to support continuity of care
ISO 13943:2017 Fire safety - Vocabulary
ISO 13958:2014 Concentrates for haemodialysis and related therapies
ISO 13959:2014 Water for haemodialysis and related therapies
ISO 13960:2010 Cardiovascular implants and extracorporeal systems – Plasmafilters
ISO/IEC 13961:2000 Information technology - Scalable Coherent Interface (SCI)
ISO/IEC 13962:1995 Information technology – Data interchange on 12,7 mm, 112-track magnetic tape cartridges – DLT 2 format
ISO/IEC 13963:1995 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 230 megabytes per cartridge
ISO 13969:2003 Milk and milk products – Guidelines for a standardized description of microbial inhibitor tests
ISO 13970:2011 Recreational diving services – Requirements for the training of recreational snorkelling guides
ISO/TS 13972:2015 Health informatics – Detailed clinical models, characteristics and processes
ISO/TR 13973:2014 Artificial recharge to groundwater
ISO 13990 Textile machinery and accessories – Yarn feeders and yarn control for knitting machines
- ISO 13990-1:2006 Part 1: Vocabulary

ISO 14000 – ISO 14999

ISO 14000 Environmental management systems [This is a set of standards, rather than a single standard.]
ISO 14001:2015 Environmental management systems – Requirements with guidance for use
ISO 14004:2016 Environmental management systems – General guidelines on implementation
ISO 14005:2010 Environmental management systems – Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation
ISO 14006:2011 Environmental management systems – Guidelines for incorporating ecodesign
ISO 14031 Environmental management - Environmental performance evaluation – Guidelines
ISO 14050:2009 Environmental management – Vocabulary
ISO 14051 Environmental management – Material flow cost accounting - General framework
ISO 14064 Greenhouse gases
ISO/TR 14073:2017 Environmental management - Water footprint - Illustrative examples on how to apply ISO 14046
ISO 14084 Process diagrams for power plants
- ISO 14084-1:2015 Part 1: Specification for diagrams
- ISO 14084-2:2015 Part 2: Graphical symbols
ISO/TS 14101:2012 Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method
ISO/IEC 14102:2008 Information technology - Guideline for the evaluation and selection of CASE tools
ISO/TR 14105:2011 Document management - Change management for successful electronic document management system (EDMS) implementation
ISO 14117:2012 Active implantable medical devices – Electromagnetic compatibility – EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
ISO 14132 Optics and photonics - Vocabulary for telescopic systems
- ISO 14132-1:2015 Part 1: General terms and alphabetical indexes of terms in ISO 14132
- ISO 14132-2:2015 Part 2: Terms for binoculars, monoculars and spotting scopes
- ISO 14132-3:2014 Part 3: Terms for telescopic sights
- ISO 14132-4:2015 Part 4: Terms for astronomical telescopes
- ISO 14132-5:2008 Part 5: Terms for night vision devices
ISO/IEC 14136:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Identification supplementary services
ISO 14139:2000 Hydrometric determinations – Flow measurements in open channels using structures – Compound gauging structures
ISO/IEC 14143 Information technology - Software measurement - Functional size measurement
- ISO/IEC 14143-1:2007 Part 1: Definition of concepts
- ISO/IEC 14143-2:2011 Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
- ISO/IEC TR 14143-3:2003 Part 3: Verification of functional size measurement methods
- ISO/IEC TR 14143-4:2002 Part 4: Reference model
- ISO/IEC TR 14143-5:2004 Part 5: Determination of functional domains for use with functional size measurement
- ISO/IEC 14143-6:2012 Part 6: Guide for use of ISO/IEC 14143 series and related International Standards
ISO 14145 Roller ball pens and refills
- ISO 14145-2:1998 Part 2: Documentary use (DOC)
ISO 14155:2011 Clinical investigation of medical devices for human subjects – Good clinical practice
ISO 14163:1998 Acoustics – Guidelines for noise control by silencers
ISO 14164:1999 Stationary source emissions – Determination of the volume flowrate of gas streams in ducts – Automated method
ISO/IEC 14165 Information technology - Fibre Channel
- ISO/IEC 14165-114:2005 Part 114: 100 MB/s Balanced copper physical interface (FC-100-DF-EL-S)
- ISO/IEC 14165-115:2006 Part 115: Physical Interfaces (FC-PI)
- ISO/IEC 14165-116:2005 Part 116: 10 Gigabit (10GFC)
- ISO/IEC TR 14165-117:2007 Part 117: Methodologies for jitter and signal quality (MJSQ)
- ISO/IEC 14165-122:2005 Part 122: Arbitrated Loop-2 (FC-AL-2)
- ISO/IEC 14165-131:2000 Part 131: Switch Fabric Requirements (FC-SW)
- ISO/IEC 14165-133:2010 Part 133: Switch Fabric-3 (FC-SW-3)
- ISO/IEC 14165-141:2001 Part 141: Fabric Generic Requirements (FC-FG)
- ISO/IEC 14165-211:1999 Part 211: Mapping to HIPPI-FP (FC-FP)
- ISO/IEC 14165-222:2005 Part 222: Single-byte command code 2 mapping protocol (FC-SB-2)
- ISO/IEC 14165-241:2005 Part 241: Backbone 2 (FC-BB-2)
- ISO/IEC 14165-243:2012 Part 243: Backbone 3 (FC-BB-3)
- ISO/IEC 14165-251:2008 Part 251: Framing and Signaling (FC-FS)
- ISO/IEC TR 14165-312:2009 Part 312: Avionics environment upper layer protocol MIL-STD-1553B Notice 2 (FC-AE-1553)
- ISO/IEC TR 14165-313:2013 Part 313: Avionics Environment—Anonymous Synchronous Messaging (FC-AE-ASM)
- ISO/IEC TR 14165-314:2013 Part 314: Avionics Environment – Remote Direct Memory Access (FC-AE-RDMA)
- ISO/IEC 14165-321:2009 Part 321: Audio-Video (FC-AV)
- ISO/IEC 14165-331:2007 Part 331: Virtual Interface (FC-VI)
- ISO/IEC TR 14165-372:2011 Part 372: Methodologies of interconnects-2 (FC-MI-2)
- ISO/IEC 14165-414:2007 Part 414: Generic Services—4 (FC-GS-4)
- ISO/IEC 14165-521:2009 Part 521: Fabric application interface standard (FAIS)
ISO/IEC 14169:1995 Information technology – 90 mm flexible disk cartridges – 21 MBytes formatted capacity – ISO Type 305
ISO 14189:2013 Water quality – Enumeration of Clostridium perfringens – Method using membrane filtration
ISO 14199:2015 Health informatics – Information models – Biomedical Research Integrated Domain Group (BRIDG) Model
ISO 14223 Radiofrequency identification of animals – Advanced transponders
ISO 14224 Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
ISO 14230 Road vehicles – Diagnostic systems – Keyword Protocol 2000
ISO 14242 Implants for surgery – Wear of total hip-joint prostheses
- ISO 14242-1:2014 Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
- ISO 14242-2:2016 Part 2: Methods of measurement
- ISO 14242-3:2009 Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
ISO 14243 Implants for surgery – Wear of total knee-joint prostheses
- ISO 14243-1:2009 Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
- ISO 14243-2:2016 Part 2: Methods of measurement
- ISO 14243-3:2014 Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
ISO/IEC 14251:1995 Information technology – Data interchange on 12,7 mm 36-track magnetic tape cartridges
ISO/IEC TR 14252:1996 Information technology - Guide to the POSIX Open System Environment (OSE) [Withdrawn without replacement]
ISO 14253 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment
- ISO 14253-1:2013 Part 1: Decision rules for proving conformity or nonconformity with specifications
- ISO 14253-2:2011 Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
- ISO 14253-3:2011 Part 3: Guidelines for achieving agreements on measurement uncertainty statements
- ISO/TS 14253-4:2010 Part 4: Background on functional limits and specification limits in decision rules
- ISO 14253-5:2015 Part 5: Uncertainty in verification testing of indicating measuring instruments
- ISO/TR 14253-6:2012 Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
ISO/TS 14265:2011 Health Informatics – Classification of purposes for processing personal health information
ISO/TR 14283:2004 Implants for surgery – Fundamental principles
ISO 14289 Document management applications - Electronic document file format enhancement for accessibility
- ISO 14289-1:2014 Part 1: Use of ISO 32000-1 (PDF/UA-1)
ISO/TR 14292:2012 Health informatics – Personal health records – Definition, scope and context
ISO 14296:2016 Intelligent transport systems – Extension of map database specifications for applications of cooperative ITS
ISO 14302:2002 Space systems – Electromagnetic compatibility requirements
ISO 14362 Textiles - Methods for determination of certain aromatic amines derived from azo colorants
- ISO 14362-1:2017 Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
- ISO 14362-3:2017 Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
ISO/IEC TR 14369:2014 Information technology - Programming languages, their environments and system software interfaces - Guidelines for the preparation of Language-Independent Service Specifications (LISS)
ISO 14405 Geometrical product specifications (GPS) – Dimensional tolerancing
- ISO 14405-1:2016 Part 1: Linear sizes
- ISO 14405-2:2011 Part 2: Dimensions other than linear sizes
- ISO 14405-3:2016 Part 3: Angular sizes
ISO 14406:2010 Geometrical product specifications (GPS) - Extraction
ISO 14408:2016 Tracheal tubes designed for laser surgery – Requirements for marking and accompanying information
ISO 14416:2003 Information and documentation – Requirements for binding of books, periodicals, serials and other paper documents for archive and library use – Methods and materials
ISO/IEC 14417:1999 Information technology – Data recording format DD-1 for magnetic tape cassette conforming to IEC 1016
ISO/TS 14441:2013 Health informatics – Security and privacy requirements of EHR systems for use in conformity assessment
ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards
ISO 14451 Pyrotechnic articles – Pyrotechnic articles for vehicles
- ISO 14451-1:2013 Part 1: Terminology
ISO 14452:2012 Network services billing – Requirements
ISO 14461 Milk and milk products – Quality control in microbiological laboratories
- ISO 14461-1:2005 Part 1: Analyst performance assessment for colony counts
- ISO 14461-2:2005 Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
ISO/IEC 14462:2010 Information technology - Open-edi reference model
ISO/TR 14468:2010 Selected illustrations of attribute agreement analysis
ISO/IEC TR 14471:2007 Information technology - Software engineering - Guidelines for the adoption of CASE tools
ISO/IEC 14473:1999 Information technology - Office equipment - Minimum information to be specified for image scanners
ISO/IEC 14474:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Functional requirements for static circuit-mode inter-PINX connections
ISO/IEC TR 14475:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Architecture and scenarios for Private Integrated Services Networking
ISO/IEC 14476 Information technology – Enhanced communications transport protocol
- ISO/IEC 14476-1:2002 Specification of simplex multicast transport
- ISO/IEC 14476-2:2003 Specification of QoS management for simplex multicast transport
- ISO/IEC 14476-3:2008 Specification of duplex multicast transport
- ISO/IEC 14476-4:2010 Specification of QoS management for duplex multicast transport
- ISO/IEC 14476-5:2008 Specification of N-plex multicast transport
- ISO/IEC 14476-6:2010 Specification of QoS management for n-plex multicast transport
ISO/IEC 14478 Information technology - Computer graphics and image processing - Presentation Environment for Multimedia Objects (PREMO)
- ISO/IEC 14478-1:1998 Part 1: Fundamentals of PREMO
- ISO/IEC 14478-2:1998 Part 2: Foundation Component
- ISO/IEC 14478-3:1998 Part 3: Multimedia Systems Services
- ISO/IEC 14478-4:1998 Part 4: Modelling, rendering and interaction component
ISO/IEC 14492:2001 Information technology - Lossy/lossless coding of bi-level images
ISO/IEC 14495 Information technology - Lossless and near-lossless compression of continuous-tone still images
- ISO/IEC 14495-1:1999 Baseline
- ISO/IEC 14495-2:2003 Extensions
ISO/IEC 14496 Information technology – Coding of audio-visual objects
ISO 14500:2003 Textile machinery and accessories – Harnesses for Jacquard weaving machines – Vocabulary
ISO 14509 Small craft – Airborne sound emitted by powered recreational craft
- ISO 14509-1:2008 Part 1: Pass-by measurement procedures
- ISO 14509-3:2009 Part 3: Sound assessment using calculation and measurement procedures
ISO 14511:2001 Measurement of fluid flow in closed conduits – Thermal mass flowmeters
ISO/IEC 14515 Information technology - Portable Operating System Interface (POSIX®) - Test methods for measuring conformance to POSIX
- ISO/IEC 14515-1:2000 Part 1: System interfaces
ISO/IEC TR 14516:2002 Information technology - Security techniques - Guidelines for the use and management of Trusted Third Party services
ISO/IEC 14517:1996 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 2,6 Gbytes per cartridge
ISO/IEC 14519:2001 Information technology - POSIX Ada Language Interfaces - Binding for System Application Program Interface (API)
ISO 14532:2014 Natural gas – Vocabulary
ISO 14533 Processes, data elements and documents in commerce, industry and administration – Long term signature profiles
- ISO 14533-1:2014 Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES)
- ISO 14533-2:2012 Part 2: Long term signature profiles for XML Advanced Electronic Signatures (XAdES)
- ISO 14533-3:2017 Part 3: Long term signature profiles for PDF Advanced Electronic Signatures (PAdES)
ISO 14534:2011 Ophthalmic optics – Contact lenses and contact lens care products – Fundamental requirements
ISO 14539:2000 Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics
ISO/IEC 14543 Information technology – Home Electronic System (HES) architecture
- ISO/IEC 14543-2-1:2006 Part 2-1: Introduction and device modularity
- ISO/IEC 14543-3-1:2006 Part 3-1: Communication layers – Application layer for network based control of HES Class 1
- ISO/IEC 14543-3-2:2006 Part 3-2: Communication layers – Transport, network and general parts of data link layer for network based control of HES Class 1
- ISO/IEC 14543-3-3:2007 Part 3-3: User process for network based control of HES Class 1
- ISO/IEC 14543-3-4:2007 Part 3-4: System management – Management procedures for network based control of HES Class 1
- ISO/IEC 14543-3-5:2007 Part 3-5: Media and media dependent layers – Power line for network based control of HES Class 1
- ISO/IEC 14543-3-6:2007 Part 3-6: Media and media dependent layers – Network based on HES Class 1, twisted pair
- ISO/IEC 14543-3-7:2007 Part 3-7: Media and media dependent layers – Radio frequency for network based control of HES Class 1
- ISO/IEC 14543-3-10:2012 Part 3-10: Wireless short-packet (WSP) protocol optimized for energy harvesting – Architecture and lower layer protocols
- ISO/IEC 14543-3-11:2016 Part 3-11: Frequency modulated wireless short-packet (FMWSP) protocol optimised for energy harvesting – Architecture and lower layer protocols
- ISO/IEC TR 14543-4:2002 Part 4: Home and building automation in a mixed-use building
- ISO/IEC 14543-4-1:2008 Part 4-1: Communication layers – Application layer for network enhanced control devices of HES Class 1
- ISO/IEC 14543-4-2:2008 Part 4-2: Communication layers – Transport, network and general parts of data link layer for network enhanced control devices of HES Class 1
- ISO/IEC 14543-4-3:2015 Part 4-3: Application layer interface to lower communications layers for network enhanced control devices of HES Class 1
- ISO/IEC 14543-5-1:2010 Part 5-1: Intelligent grouping and resource sharing for Class 2 and Class 3 – Core protocol
- ISO/IEC 14543-5-3:2012 Part 5-3: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Basic application
- ISO/IEC 14543-5-4:2010 Part 5-4: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Device validation
- ISO/IEC 14543-5-5:2012 Part 5-5: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Device type
- ISO/IEC 14543-5-6:2012 Part 5-6: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Service type
- ISO/IEC 14543-5-7:2015 Part 5-7: Intelligent grouping and 3 resource sharing – Remote access system architecture
- ISO/IEC 14543-5-8:2017 Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Remote access core protocol
- ISO/IEC 14543-5-9:2017 Part 5-9: Intelligent grouping and resource sharing for HES class 2 and class 3 – Remote access service platform
- ISO/IEC 14543-5-21:2012 Part 5-21: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Application profile – AV profile
- ISO/IEC 14543-5-22:2010 Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Application profile – File profile
ISO 14560:2004 Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
ISO/TR 14564:1995 Shipbuilding and marine structures - Marking of escape routes
ISO/IEC 14568:1997 Information technology - DXL: Diagram eXchange Language for tree-structured charts
ISO/IEC 14575:2000 Information technology - Microprocessor systems - Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction)
ISO/IEC 14576:1999 Information technology - Synchronous Split Transfer Type System Bus (STbus) - Logical Layer
ISO 14588:2000 Blind rivets - Terminology and definitions
ISO/IEC 14598 Software engineering - Product evaluation^{[Note 3]}
- ISO/IEC 14598-5:1998 Part 5: Process for evaluators
- ISO/IEC 14598-6:2001 Part 6: Documentation of evaluation modules
ISO 14602:2010 Non-active surgical implants – Implants for osteosynthesis – Particular requirements
ISO 14607:2007 Non-active surgical implants – Mammary implants – Particular requirements
ISO 14617 Graphical symbols for diagrams
- ISO 14617-1:2005 Part 1: General information and indexes
- ISO 14617-2:2002 Part 2: Symbols having general application
- ISO 14617-3:2002 Part 3: Connections and related devices
- ISO 14617-3:2002 Part 3: Connections and related devices
- ISO 14617-4:2002 Part 4: Actuators and related devices
- ISO 14617-5:2002 Part 5: Measurement and control devices
- ISO 14617-6:2002 Part 6: Measurement and control functions
- ISO 14617-7:2002 Part 7: Basic mechanical components
- ISO 14617-8:2002 Part 8: Valves and dampers
- ISO 14617-9:2002 Part 9: Pumps, compressors and fans
- ISO 14617-10:2002 Part 10: Fluid power converters
- ISO 14617-11:2002 Part 11: Devices for heat transfer and heat engines
- ISO 14617-12:2002 Part 12: Devices for separating, purification and mixing
- ISO 14617-13:2004 Part 13: Devices for material processing
- ISO 14617-14:2004 Part 14: Devices for transport and handling of material
- ISO 14617-15:2002 Part 15: Installation diagrams and network maps
ISO 14630:2012 Non-active surgical implants – General requirements
ISO 14638:2015 Geometrical product specifications (GPS) - Matrix model
ISO/TR 14639 Health informatics – Capacity-based eHealth architecture roadmap
- ISO/TR 14639-1:2012 Part 1: Overview of national eHealth initiatives
- ISO/TR 14639-2:2014 Part 2: Architectural components and maturity model
ISO 14641 Electronic archiving
- ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation
ISO 14644 Cleanrooms and associated controlled environments
ISO/IEC 14651:2016 Information technology - International string ordering and comparison - Method for comparing character strings and description of the common template tailorable ordering
ISO/IEC 14662:2010 Information technology – Open-edi reference model
ISO/TR 14685:2001 Hydrometric determinations – Geophysical logging of boreholes for hydrogeological purposes – Considerations and guidelines for making measurements
ISO 14686:2003 Hydrometric determinations – Pumping tests for water wells – Considerations and guidelines for design, performance and use
ISO 14695:2003 Industrial fans – Method of measurement of fan vibration
ISO 14698 Cleanrooms and associated controlled environments – Biocontamination control
- ISO 14698-1:2003 General principles and methods
- ISO 14698-2:2003 Evaluation and interpretation of biocontamination data
ISO/IEC 14699:1997 Information technology – Open Systems Interconnection – Transport Fast Byte Protocol
ISO/IEC 14700:1997 Information technology – Open Systems Interconnection – Network Fast Byte Protocol
ISO 14708 Implants for surgery – Active implantable medical devices
- ISO 14708-1:2014 Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
- ISO 14708-2:2012 Part 2: Cardiac pacemakers
- ISO 14708-3:2017 Part 3: Implantable neurostimulators
- ISO 14708-4:2008 Part 4: Implantable infusion pumps
- ISO 14708-5:2010 Part 5: Circulatory support devices
- ISO 14708-6:2010 Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators)
- ISO 14708-7:2013 Part 7: Particular requirements for cochlear implant systems
ISO/IEC 14709 Information technology - Configuration of Customer Premises Cabling (CPC) for applications
- ISO/IEC 14709-1:1997 Part 1: Integrated Services Digital Network (ISDN) basic access
- ISO/IEC 14709-2:1998 Part 2: Integrated Services Digital Network (ISDN) primary rate
ISO 14722:1998 Moped and moped-rider kinematics – Vocabulary
ISO 14726:2008 Ships and marine technology – Identification colours for the content of piping systems
ISO 14729:2001 Ophthalmic optics – Contact lens care products – Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses
ISO 14730:2014 Ophthalmic optics – Contact lens care products – Antimicrobial preservative efficacy testing and guidance on determining discard date
ISO 14739 Document management - 3D use of Product Representation Compact (PRC) format
- ISO 14739-1:2014 Part 1: PRC 10001
ISO/TR 14742:2010 Financial services – Recommendations on cryptographic algorithms and their use
ISO/IEC 14750:1999 Information technology – Open Distributed Processing – Interface Definition Language
ISO/IEC 14752:2000 Information technology - Open Distributed Processing - Protocol support for computational interactions
ISO/IEC 14753:1999 Information technology - Open Distributed Processing - Interface references and binding
ISO/IEC 14754:1999 Information technology – Pen-Based Interfaces – Common gestures for Text Editing with Pen-Based Systems
ISO/IEC 14755:1997 Information technology – Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
ISO/IEC 14756:1999 Information technology - Measurement and rating of performance of computer-based software systems
ISO/IEC 14760:1997 Information technology - Data interchange on 90 mm overwritable and read only optical disk cartridges using phase change - Capacity: 1,3 Gbytes per cartridge
ISO/IEC 14762:2009 Information technology - Functional safety requirements for Home and Building Electronic Systems (HBES)
ISO/IEC 14763 Information technology - Implementation and operation of customer premises cabling
- ISO/IEC 14763-1:1999 Part 1: Administration
- ISO/IEC 14763-2:2012 Part 2: Planning and installation
- ISO/IEC TR 14763-2-1:2011 Part 2-1: Planning and installation - Identifiers within administration systems
- ISO/IEC 14763-3:2014 Part 3: Testing of optical fibre cabling
ISO/IEC 14764:2006 Software Engineering - Software Life Cycle Processes - Maintenance
ISO/IEC 14765:1997 Information technology - Framework for protocol identification and encapsulation
ISO/IEC 14766:1997 Information technology - Telecommunications and information exchange between systems - Use of OSI applications over the Internet Transmission Control Protocol (TCP)
ISO/IEC 14769:2001 Information technology - Open Distributed Processing - Type Repository Function
ISO/IEC 14771:1999 Information technology - Open Distributed Processing - Naming framework
ISO/IEC 14772 Information technology - Computer graphics and image processing - The Virtual Reality Modeling Language (VRML)^{[Note 3]}
- ISO/IEC 14772-1:1997 Part 1: Functional specification and UTF-8 encoding
- ISO/IEC 14772-2:2004 Part 2: External authoring interface (EAI)
ISO/IEC 14776 Information technology - Small Computer System Interface (SCSI)^{[Note 3]}
- ISO/IEC 14776-112:2002 Part 112: Parallel Interface-2 (SPI-2)
- ISO/IEC 14776-113:2002 Part 113: Parallel Interface-3 (SPI-3)
- ISO/IEC 14776-115:2004 Part 115: Parallel Interface-5 (SPI-5)
- ISO/IEC 14776-121:2010 Part 121: Passive Interconnect Performance (PIP)
- ISO/IEC 14776-150:2004 Part 150: Serial Attached SCSI (SAS)
- ISO/IEC 14776-151:2010 Part 151: Serial Attached SCSI - 1.1 (SAS-1.1)
- ISO/IEC 14776-153:2015 Part 153: Serial Attached SCSI - 2.1 (SAS-2.1)
- ISO/IEC 14776-154:2017 Part 154: Serial Attached SCSI – 3 (SAS-3)
- ISO/IEC 14776-222:2005 Part 222: Fibre Channel Protocol for SCSI, Second Version (FCP-2)
- ISO/IEC 14776-223:2008 Part 223: Fibre Channel Protocol for SCSI, Third Version (FCP-3)
- ISO/IEC 14776-232:2001 Part 232: Serial Bus Protocol 2 (SBP-2)
- ISO/IEC 14776-251:2014 Part 251: USB attached SCSI (UAS)
- ISO/IEC 14776-261:2012 Part 261: SAS Protocol Layer (SPL)
- ISO/IEC 14776-262:2017 Part 262: SAS protocol layer - 2 (SPL-2)
- ISO/IEC 14776-321:2002 Part 321: SCSI-3 Block Commands (SBC)
- ISO/IEC 14776-322:2007 Part 322: SCSI Block Commands - 2 (SBC-2)
- ISO/IEC 14776-323:2017 Part 323: SCSI Block commands - 3 (SBC-3)
- ISO/IEC 14776-326:2015 Part 326: Reduced block commands (RBC)
- ISO/IEC 14776-331:2002 Part 331: Stream Commands (SSC)
- ISO/IEC 14776-333:2013 Part 333: SCSI Stream Commands - 3 (SSC-3)
- ISO/IEC 14776-341:2000 Part 341: Controller Commands (SCC)
- ISO/IEC 14776-342:2000 Part 342: Controller Commands - 2 (SCC-2)
- ISO/IEC 14776-351:2007 Part 351: Medium Changer Commands (SCSI-3 SMC)
- ISO/IEC 14776-362:2006 Part 362: Multimedia commands-2 (MMC-2)
- ISO/IEC 14776-372:2011 Part 372: SCSI Enclosure Services - 2 (SES-2)
- ISO/IEC 14776-381:2000 Part 381: Optical Memory Card Device Commands (OMC)
- ISO/IEC 14776-411:1999 Part 411: SCSI-3 Architecture Model (SCSI-3 SAM)
- ISO/IEC 14776-412:2006 Part 412: Architecture Model -2 (SAM-2)
- ISO/IEC 14776-413:2007 Part 413: SCSI Architecture Model -3 (SAM-3)
- ISO/IEC 14776-414:2009 Part 414: SCSI Architecture Model-4 (SAM-4)
- ISO/IEC 14776-452:2005 Part 452: SCSI Primary Commands - 2 (SPC-2)
- ISO/IEC 14776-453:2009 Part 453: Primary commands-3 (SPC-3)
ISO 14785:2014 Tourist information offices – Tourist information and reception services – Requirements
ISO/TR 14786:2014 Nanotechnologies – Considerations for the development of chemical nomenclature for selected nano-objects
ISO 14801 Dentistry – Implants – Dynamic fatigue test for endosseous dental implants
ISO/TR 14806:2013 Intelligent transport systems – Public transport requirements for the use of payment applications for fare media
ISO 14813 Intelligent transport systems – Reference model architecture(s) for the ITS sector
- ISO 14813-1:2015 Part 1: ITS service domains, service groups and services
- ISO 14813-5:2010 Part 5: Requirements for architecture description in ITS standards
- ISO 14813-6:2009 Part 6: Data presentation in ASN.1
ISO 14814:2006 Road transport and traffic telematics – Automatic vehicle and equipment identification – Reference architecture and terminology
ISO 14815:2005 Road transport and traffic telematics – Automatic vehicle and equipment identification – System specifications
ISO 14816:2005 Road transport and traffic telematics – Automatic vehicle and equipment identification – Numbering and data structure
ISO 14817 Intelligent transport systems – ITS central data dictionaries
- ISO 14817-1:2015 Part 1: Requirements for ITS data definitions
- ISO 14817-2:2015 Part 2: Governance of the Central ITS Data Concept Registry
- ISO 14817-3:2017 Part 3: Object identifier assignments for ITS data concepts
ISO 14819 Intelligent transport systems – Traffic and travel information messages via traffic message coding
- ISO 14819-1:2013 Part 1: Coding protocol for Radio Data System – Traffic Message Channel (RDS-TMC) using ALERT-C
- ISO 14819-2:2013 Part 2: Event and information codes for Radio Data System – Traffic Message Channel (RDS-TMC) using ALERT-C
- ISO 14819-3:2013 Part 3: Location referencing for Radio Data System – Traffic Message Channel (RDS-TMC) using ALERT-C
- ISO 14819-6:2006 Part 6: Encryption and conditional access for the Radio Data System – Traffic Message Channel ALERT C coding
ISO 14823:2017 Intelligent transport systems – Graphic data dictionary
ISO 14825:2011 Intelligent transport systems – Geographic Data Files (GDF) – GDF5.0
ISO 14827 Transport information and control systems – Data interfaces between centres for transport information and control systems
- ISO 14827-1:2005 Part 1: Message definition requirements
- ISO 14827-2:2005 Part 2: DATEX-ASN
ISO/IEC 14833:1996 Information technology – Data interchange on 12,7 mm 128-Track magnetic tape cartridges – DLT 3 format
ISO/IEC 14834:1996 Information technology - Distributed Transaction Processing - The XA Specification
ISO 14837 Mechanical vibration – Ground-borne noise and vibration arising from rail systems
- ISO 14837-1:2005 Part 1: General guidance
- ISO/TS 14837-32:2015 Part 32: Measurement of dynamic properties of the ground
ISO 14839 Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings
- ISO 14839-1:2002 Part 1: Vocabulary
- ISO 14839-2:2004 Part 2: Evaluation of vibration
- ISO 14839-3:2006 Part 3: Evaluation of stability margin
- ISO 14839-4:2012 Part 4: Technical guidelines
ISO/IEC 14840:1996 Information technology – 12,65 mm wide magnetic tape cartridge for information interchange – Helical scan recording – Data-D3-1 format
ISO/IEC 14841:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call offer supplementary service
ISO/IEC 14842:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Do not disturb and do not disturb override supplementary services
ISO/IEC 14843:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Offer supplementary service
ISO/IEC 14844:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Do Not Disturb and Do Not Disturb Override supplementary services
ISO/IEC 14845:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call intrusion supplementary service
ISO/IEC 14846:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Intrusion supplementary service
ISO 14855 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolved carbon dioxide
- ISO 14855-1:2012 General method
- ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
ISO/IEC 14863:1996 Information technology - System-Independent Data Format (SIDF)
ISO/TR 14873:2013 Information and documentation - Statistics and quality issues for web archiving
ISO 14879 Implants for surgery – Total knee-joint prostheses
- ISO 14879-1:2000 Part 1: Determination of endurance properties of knee tibial trays
ISO 14880 Optics and photonics - Microlens arrays
- ISO 14880-1:2016 Part 1: Vocabulary and general properties
- ISO 14880-2:2006 Part 2: Test methods for wavefront aberrations
- ISO 14880-3:2006 Part 3: Test methods for optical properties other than wavefront aberrations
- ISO 14880-4:2006 Part 4: Test methods for geometrical properties
- ISO/TR 14880-5:2010 Part 5: Guidance on testing
ISO 14881:2001 Integrated optics – Interfaces – Parameters relevant to coupling properties
ISO/IEC 14882:2017 Programming Languages – C++
ISO/IEC 14888 Information technology - Security techniques - Digital signatures with appendix
- ISO/IEC 14888-1:2008 Part 1: General
- ISO/IEC 14888-2:2008 Part 2: Integer factorization based mechanisms
- ISO/IEC 14888-3:2016 Part 3: Discrete logarithm based mechanisms
ISO 14889:2013 Ophthalmic optics – Spectacle lenses – Fundamental requirements for uncut finished lenses
ISO/TS 14904:2002 Road transport and traffic telematics – Electronic fee collection (EFC) – Interface specification for clearing between operators
ISO 14906:2011 Electronic fee collection – Application interface definition for dedicated short-range communication
ISO/TS 14907 Electronic fee collection – Test procedures for user and fixed equipment
- ISO/TS 14907-1:2015 Part 1: Description of test procedures
- ISO/TS 14907-2:2016 Part 2: Conformance test for the on-board unit application interface
ISO/IEC 14908 Information technology - Control network protocol
- ISO/IEC 14908-1:2012 Part 1: Protocol stack
- ISO/IEC 14908-2:2012 Part 2: Twisted pair communication
- ISO/IEC 14908-3:2012 Part 3: Power line channel specification
- ISO/IEC 14908-4:2012 Part 4: IP communication
ISO 14915 Software ergonomics for multimedia user interfaces
- ISO 14915-1:2002 Part 1: Design principles and framework
- ISO 14915-2:2003 Part 2: Multimedia navigation and control
- ISO 14915-3:2002 Part 3: Media selection and combination
ISO 14917:2017 Thermal spraying - Terminology, classification
ISO 14949:2001 Implants for surgery – Two-part addition-cure silicone elastomers
ISO 14963:2003 Mechanical vibration and shock – Guidelines for dynamic tests and investigations on bridges and viaducts
ISO 14971:2007 Medical devices – Application of risk management to medical devices
ISO 14972:1998 Sterile obturators for single use with over-needle peripheral intravascular catheters
ISO 14975:2000 Surface chemical analysis – Information formats
ISO 14976:1998 Surface chemical analysis – Data transfer format
ISO/IEC 14977:1996 Information technology – Syntactic metalanguage – Extended BNF
ISO 14978:2006 Geometrical product specifications (GPS) – General concepts and requirements for GPS measuring equipment
ISO 14982:1998 Agricultural and forestry machinery – Electromagnetic compatibility – Test methods and acceptance criteria

ISO 15000 – ISO 15999

ISO/TS 15000 Electronic business eXtensible Markup Language ebXML
- ISO 15000-5:2014 Part 5: Core Components Specification (CCS)
ISO 15001:2010 Anaesthetic and respiratory equipment – Compatibility with oxygen
ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
ISO 15004 Ophthalmic instruments – Fundamental requirements and test methods
- ISO 15004-1:2006 Part 1: General requirements applicable to all ophthalmic instruments
- ISO 15004-2:2007 Part 2: Light hazard protection
ISO 15006:2011 Road vehicles – Ergonomic aspects of transport information and control systems – Specifications for in-vehicle auditory presentation
ISO 15010:1998 Disposable hanging devices for transfusion and infusion bottles – Requirements and test methods
ISO 15016:2015 Ships and marine technology - Guidelines for the assessment of speed and power performance by analysis of speed trial data
ISO/IEC 15018:2004 Information technology - Generic cabling for homes
ISO 15022 Securities – Scheme for messages (Data Field Dictionary)
ISO/IEC 15026 Systems and software engineering—Systems and software assurance
- ISO/IEC 15026-1:2013 Part 1: Concepts and vocabulary
- ISO/IEC 15026-2:2011 Part 2: Assurance case
- ISO/IEC 15026-3:2015 Part 3: System integrity levels
- ISO/IEC 15026-4:2012 Part 4: Assurance in the life cycle
ISO 15031 Road vehicles – Communication between vehicle and external equipment for emissions-related diagnostics
- ISO 15031-2:2010 Part 2: Guidance on terms, definitions, abbreviations and acronyms
ISO 15032:2000 Prostheses – Structural testing of hip units
ISO/IEC 15041:1997 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 640 Mbytes per cartridge
ISO/IEC TR 15044:2000 Information technology - Terminology for the Home Electronic System (HES)
ISO/IEC 15045 Information technology - Home Electronic System (HES) gateway
- ISO/IEC 15045-1:2004 Part 1: A residential gateway model for HES
- ISO/IEC 15045-2:2012 Part 2: Modularity and protocol
ISO/IEC 15049:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Advice of charge supplementary services
ISO/IEC 15050:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Advice Of Charge supplementary services
ISO/IEC 15051:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Recall supplementary service
ISO/IEC 15052:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Recall supplementary service
ISO/IEC 15053:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Interception additional network feature
ISO/IEC 15054:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Interception additional network feature
ISO/IEC 15055:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Transit counter additional network feature
ISO/IEC 15056:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Transit counter additional network feature
ISO/IEC 15067 Information technology - Home Electronic System (HES) application model^{[Note 3]}
- ISO/IEC TR 15067-2:1997 Part 2: Lighting model for HES
- ISO/IEC 15067-3:2012 Part 3: Model of a demand-response energy management system for HES
- ISO/IEC TR 15067-3-2:2016 Part 3-2: GridWise interoperability context-setting framework
- ISO/IEC TR 15067-4:2001 Part 4: Security System for HES
ISO 15075:2003 Transport information and control systems – In-vehicle navigation systems – Communications message set requirements
ISO 15081:2011 Agricultural equipment - Graphical symbols for pressurized irrigation systems
ISO 15082 Road vehicles – Tests for rigid plastic safety glazing materials
ISO 15086 Hydraulic fluid power – Determination of the fluid-borne noise characteristics of components and systems
- ISO 15086-1:2001 Part 1: Introduction
- ISO 15086-2:2000 Part 2: Measurement of the speed of sound in a fluid in a pipe
- ISO 15086-3:2008 Part 3: Measurement of hydraulic impedance
ISO 15099 Thermal performance of windows, doors and shading devices – Detailed calculations
ISO 15112 Natural gas – Energy determination
ISO 15118 Road vehicles - Vehicle to grid communication interface
ISO 15137:2005 Self-adhesive hanging devices for infusion bottles and injection vials – Requirements and test methods
ISO 15142 Implants for surgery – Metal intramedullary nailing systems
- ISO 15142-1:2003 Part 1: Intramedullary nails
- ISO 15142-2:2003 Part 2: Locking components
- ISO 15142-3:2003 Part 3: Connection devices and reamer diameter measurements
ISO 15143 Earth-moving machinery and mobile road construction machinery – Worksite data exchange
- ISO 15143-1:2010 Part 1: System architecture
- ISO 15143-2:2010 Part 2: Data dictionary
- ISO/TS 15143-3:2016 Part 3: Telematics data
ISO/IEC 15145:1997 Information technology - Programming languages - FORTH
ISO/IEC 15149:2011 Information technology – Telecommunications and information exchange between systems – Magnetic field area network (MFAN)
- ISO/IEC 15149-1:2014 Part 1: Air interface
- ISO/IEC 15149-2:2015 Part 2: In-band Control Protocol for Wireless Power Transfer
- ISO/IEC 15149-3:2016 Part 3: Relay Protocol for Extended Range
- ISO/IEC 15149-4:2016 Part 4: Security Protocol for Authentication
ISO 15174:2012 Milk and milk products – Microbial coagulants – Determination of total milk-clotting activity
ISO 15188:2001 Project management guidelines for terminology standardization
ISO 15189:2012 Medical laboratories – Particular requirements for quality and competence
ISO/IEC 15200:1996 Information technology - Adaptive Lossless Data Compression algorithm (ALDC)
ISO/IEC 15205:2000 SBus - Chip and module interconnect bus
ISO 15212 Oscillation-type density meters
- ISO 15212-1:1998 Part 1: Laboratory instruments
- ISO 15212-2:2002 Part 2: Process instruments for homogeneous liquids
ISO 15213:2003 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions
ISO 15214:1998 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of mesophilic lactic acid bacteria – Colony-count technique at 30 degrees C
ISO 15216 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR^{[Note 3]}
- ISO 15216-1:2017 Part 1: Method for quantification
- ISO/TS 15216-2:2013 Part 2: Method for qualitative detection
ISO 15223 Medical devices – Symbols to be used with medical device labels, labelling, and information to be supplied
- ISO 15223-1:2016 Part 1: General requirements
- ISO 15223-2:2010 Part 2: Symbol development, selection and validation
ISO 15225:2016 Medical devices – Quality management – Medical device nomenclature data structure
ISO 15226:1999 Technical product documentation – Life cycle model and allocation of documents
ISO 15230:2007 Mechanical vibration and shock – Coupling forces at the man–machine interface for hand-transmitted vibration
ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination
ISO 15241:2012 Rolling bearings - Symbols for physical quantities
ISO 15253:2000 Ophthalmic optics and instruments – Optical devices for enhancing low vision
ISO 15254:2009 Ophthalmic optics and instruments – Electro-optical devices for enhancing low vision
ISO 15261:2004 Vibration and shock generating systems - Vocabulary
ISO/IEC TR 15285:1998 Information technology - An operational model for characters and glyphs
ISO/IEC 15286:1999 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 5,2 Gbytes per cartridge
ISO/IEC/IEEE 15288:2015 Systems and software engineering – System life cycle processes
ISO/IEC/IEEE 15289:2017 Systems and software engineering – Content of life-cycle information items (documentation)
ISO/IEC 15291:1999 Information technology – Programming languages – Ada Semantic Interface Specification (ASIS)
ISO/IEC TR 15294:2000 Information technology – Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
ISO 15296:2004 Gas welding equipment - Vocabulary - Terms used for gas welding equipment
ISO/TR 15300:2001 Dentistry - Application of OSI clinical codification to the classification and coding of dental products
ISO/IEC 15307:1997 Information technology – Data interchange on 12,7 mm 128-track magnetic tape cartridges – DLT 4 format
ISO 15309:2013 Implants for surgery – Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices
ISO/PAS 15339 Graphic technology - Printing from digital data across multiple technologies
- ISO/PAS 15339-1:2015 Part 1: Principles
- ISO/PAS 15339-2:2015 Part 2: Characterized reference printing conditions, CRPC1-CRPC7
ISO 15367 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront
- ISO 15367-1:2003 Part 1: Terminology and fundamental aspects
- ISO 15367-2:2005 Part 2: Shack-Hartmann sensors
ISO 15368:2001 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
ISO 15374:1998 Implants for surgery – Requirements for production of forgings
ISO 15375:2010 Medical infusion bottles – Suspension devices for multiple use – Requirements and test methods
ISO/TR 15377:2007 Measurement of fluid flow by means of pressure-differential devices – Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
ISO 15378:2017 Primary packaging materials for medicinal products – Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
ISO 15394:2009 Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels
ISO 15403 Natural gas – Natural gas for use as a compressed fuel for vehicles
- ISO 15403-1:2006 Part 1: Designation of the quality
- ISO/TR 15403-2:2006 Part 2: Specification of the quality
ISO/IEC 15404:2000 Information technology – Office machines – Minimum information to be included in specification sheets – Facsimile equipment
ISO/IEC 15408 Information technology – Security techniques – Evaluation criteria for IT security
- ISO/IEC 15408-1:2009 Part 1: Introduction and general model
- ISO/IEC 15408-2:2008 Part 2: Security functional components
- ISO/IEC 15408-3:2008 Part 3: Security assurance components
ISO/IEC TR 15410:1998 Information technology – Telecommunications and information exchange between systems – PISN mobility-general principles and services aspects
ISO/IEC 15411:1999 Information technology - Segmented keyboard layouts
ISO/IEC 15412:1999 Information technology - Portable computer keyboard layouts
ISO/IEC TR 15413:2001 Information technology - Font services - Abstract service definition
ISO/IEC 15414:2015 Information technology - Open data processing - Reference Model - Enterprise Language
ISO/IEC 15415:2011 Information technology - Automatic identification and data capture techniques - Bar code symbol print quality test specification - Two-dimensional symbols
ISO/IEC 15416:2016 Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols
ISO/IEC 15417:2007 Information technology - Automatic identification and data capture techniques - Code 128 bar code symbology specification
ISO/IEC 15418:2016 Information technology - Automatic identification and data capture techniques - GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance
ISO/IEC 15419:2009 Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing
ISO/IEC 15420:2009 Information technology - Automatic identification and data capture techniques - EAN/UPC bar code symbology specification
ISO/IEC 15421:2010 Information technology - Automatic identification and data capture techniques - Bar code master test specifications
ISO/IEC 15423:2009 Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing
ISO/IEC 15424:2008 Information technology - Automatic identification and data capture techniques - Data Carrier Identifiers (including Symbology Identifiers)
ISO/IEC 15426 Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification
- ISO/IEC 15426-1:2006 Part 1: Linear symbols
- ISO/IEC 15426-2:2015 Part 2: Two-dimensional symbols
ISO/IEC 15428:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless Terminal Location Registration supplementary service and Wireless Terminal Information Exchange additional network feature
ISO/IEC 15429:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless Terminal Location Registration supplementary service and Wireless Terminal Information exchange additional network feature
ISO/IEC 15430:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless terminal call handling additional network features
ISO/IEC 15431:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless terminal call handling additional network features
ISO/IEC 15432:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless Terminal Authentication supplementary services (WTAT and WTAN)
ISO/IEC 15433:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless Terminal Authentication supplementary services
ISO/IEC 15434:2006 Information technology – Automatic identification and data capture techniques – Syntax for high-capacity ADC media
ISO/IEC 15437:2001 Information technology - Enhancements to LOTOS (E-LOTOS)
ISO/IEC 15438:2015 Information technology - Automatic identification and data capture techniques - PDF417 bar code symbology specification
ISO/IEC TR 15440:2016 Information technology - Future keyboards and other input devices and entry methods
ISO/IEC TR 15443 Information technology - Security techniques - Security assurance framework
- ISO/IEC TR 15443-1:2012 Part 1: Introduction and concepts
- ISO/IEC TR 15443-2:2012 Part 2: Analysis
ISO/IEC 15444 Information technology – JPEG 2000 image coding system
- ISO/IEC 15444-1:2016 Core coding system
- ISO/IEC 15444-2:2004 Extensions
- ISO/IEC 15444-3:2007 Motion JPEG 2000
- ISO/IEC 15444-4:2004 Conformance testing
- ISO/IEC 15444-5:2015 Reference software
- ISO/IEC 15444-6:2013 Part 6: Compound image file format
- ISO/IEC 15444-8:2007 Secure JPEG 2000
- ISO/IEC 15444-9:2005 Interactivity tools, APIs and protocols
- ISO/IEC 15444-10:2011 Extensions for three-dimensional data
- ISO/IEC 15444-11:2007 Wireless
- ISO/IEC 15444-12:2015 Part 12: ISO base media file format [Withdrawn, no replacement]
- ISO/IEC 15444-13:2008 An entry level JPEG 2000 encoder
- ISO/IEC 15444-14:2013 Part 14: XML representation and reference
ISO/IEC 15445:2000 Information technology – Document description and processing languages – HyperText Markup Language (HTML)
ISO/IEC TR 15446:2009 Information technology - Security techniques - Guide for the production of Protection Profiles and Security Targets
ISO/IEC 15457 Identification cards – Thin flexible cards
- ISO/IEC 15457-1:2008 Part 1: Physical characteristics
- ISO/IEC 15457-2:2007 Part 2: Magnetic recording technique
- ISO/IEC 15457-3:2008 Part 3: Test methods
ISO/IEC 15459 Information technology - Automatic identification and data capture techniques - Unique identification
- ISO/IEC 15459-1:2014 Part 1: Individual transport units
- ISO/IEC 15459-2:2015 Part 2: Registration procedures
- ISO/IEC 15459-3:2014 Part 3: Common rules
- ISO/IEC 15459-4:2014 Part 4: Individual products and product packages
- ISO/IEC 15459-5:2014 Part 5: Individual returnable transport items (RTIs)
- ISO/IEC 15459-6:2014 Part 6: Groupings
ISO 15469:2004 Spatial distribution of daylight – CIE standard general sky
ISO/IEC 15474 Information technology - CDIF framework
- ISO/IEC 15474-1:2002 Part 1: Overview
- ISO/IEC 15474-2:2002 Part 2: Modelling and extensibility
ISO/IEC 15475 Information technology - CDIF transfer format
- ISO/IEC 15475-1:2002 Part 1: General rules for syntaxes and encodings
- ISO/IEC 15475-2:2002 Part 2: Syntax SYNTAX.1
- ISO/IEC 15475-3:2002 Part 3: Encoding ENCODING.1
ISO/IEC 15476 Information technology - CDIF semantic metamodel
- ISO/IEC 15476-1:2002 Part 1: Foundation
- ISO/IEC 15476-2:2002 Part 2: Common
- ISO/IEC 15476-3:2006 Part 3: Data definitions
- ISO/IEC 15476-4:2005 Part 4: Data models
- ISO/IEC 15476-6:2006 Part 6: State/event models
ISO/IEC 15485:1997 Information technology - Data interchange on 120 mm optical disk cartridges using phase change PD format - Capacity: 650 Mbytes per cartridge
ISO/IEC 15486:1998 Information technology - Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 2,6 Gbytes per cartridge
ISO 15489 Information and documentation – Records management
- ISO 15489-1:2016 Part 1: Concepts and principles
- ISO/TR 15489-2:2001 Part 2: Guidelines [Withdrawn, no replacement]
ISO/IEC 15498:1997 Information technology - Data interchange on 90 mm optical disk cartridges - HS-1 format - Capacity: 650 Mbytes per cartridge
ISO/IEC 15504 Information technology – Process assessment
ISO/IEC 15505:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Message Waiting Indication supplementary service
ISO/IEC 15506:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Message Waiting Indication supplementary service
ISO/IEC 15507:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – PINX clock synchronization
ISO 15511:2011 Information and documentation - International standard identifier for libraries and related organizations (ISIL)
ISO 15519 Specification for diagrams for process industry
- ISO 15519-1:2010 Part 1: General rules
- ISO 15519-2:2015 Part 2: Measurement and control
ISO/IEC 15521:1998 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-3 format using 125 m length tapes
ISO 15529:2010 Optics and photonics - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
ISO 15530 Geometrical product specifications (GPS) – Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement
- ISO/TS 15530-1:2013 Part 1: Overview and metrological characteristics
- ISO 15530-3:2011 Part 3: Use of calibrated workpieces or measurement standards
- ISO/TS 15530-4:2008 Part 4: Evaluating task-specific measurement uncertainty using simulation
ISO 15553:2006 Water quality – Isolation and identification of Cryptosporidium oocysts and Giardia cysts from water
ISO 15583:2005 Ships and marine technology - Maritime standards list
ISO/TR 15599:2002 Digital codification of dental laboratory procedures
ISO 15614 Specification and qualification of welding procedures for metallic materials – Welding procedure test
ISO 15622:2010 Intelligent transport systems – Adaptive Cruise Control systems – Performance requirements and test procedures
ISO 15623:2013 Intelligent transport systems – Forward vehicle collision warning systems – Performance requirements and test procedures
ISO/TS 15624:2001 Transport information and control systems – Traffic Impediment Warning Systems (TIWS) – System requirements
ISO 15628:2013 Intelligent transport systems – Dedicated short range communication (DSRC) – DSRC application layer
ISO 15638 Intelligent transport systems – Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV)^{[Note 3]}
- ISO 15638-1:2012 Part 1: Framework and architecture
- ISO 15638-2:2013 Part 2: Common platform parameters using CALM
- ISO 15638-3:2013 Part 3: Operating requirements, 'Approval Authority' procedures, and enforcement provisions for the providers of regulated services
- ISO 15638-5:2013 Part 5: Generic vehicle information
- ISO 15638-6:2014 Part 6: Regulated applications
- ISO 15638-7:2013 Part 7: Other applications
- ISO 15638-8:2014 Part 8: Vehicle access management
- ISO/TS 15638-9:2013 Part 9: Remote electronic tachograph monitoring (RTM)
- ISO 15638-10:2017 Part 10: Emergency messaging system/eCall
- ISO 15638-11:2014 Part 11: Driver work records
- ISO 15638-12:2014 Part 12: Vehicle mass monitoring
- ISO/TS 15638-13:2015 Part 13: "Mass" information for jurisdictional control and enforcement
- ISO 15638-14:2014 Part 14: Vehicle access control
- ISO 15638-15:2014 Part 15: Vehicle location monitoring
- ISO 15638-16:2014 Part 16: Vehicle speed monitoring
- ISO 15638-17:2014 Part 17: Consignment and location monitoring
- ISO 15638-18:2017 Part 18: ADR (Dangerous Goods)
- ISO/TS 15638-19:2013 Part 19: Vehicle parking facilities (VPF)
ISO 15642:2003 Road construction and maintenance equipment – Asphalt mixing plants – Terminology and commercial specifications
ISO 15662:2006 Intelligent transport systems – Wide area communication – Protocol management information
ISO 15664:2001 Acoustics – Noise control design procedures for open plant
ISO 15665:2003 Acoustics – Acoustic insulation for pipes, valves and flanges
ISO 15667:2000 Acoustics – Guidelines for noise control by enclosures and cabins
ISO 15674:2016 Cardiovascular implants and artificial organs – Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags
ISO 15675:2016 Cardiovascular implants and artificial organs – Cardiopulmonary bypass systems – Arterial blood line filters
ISO 15676:2016 Cardiovascular implants and artificial organs – Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
ISO 15686 Buildings and constructed assets – Service life planning
ISO 15688:2012 Road construction and maintenance equipment – Soil stabilizers – Terminology and commercial specifications
ISO 15689:2003 Road construction and maintenance equipment – Powder binder spreaders – Terminology and commercial specifications
ISO/IEC 15693 Identification cards – Contactless integrated circuit cards – Vicinity cards
ISO/TS 15696:2012 Cranes – List of equivalent terms
ISO 15706 Information and documentation – International Standard Audiovisual Number (ISAN)
ISO 15707:2001 Information and documentation – International Standard Musical Work Code (ISWC)
ISO/IEC 15718:1998 Information technology – Data interchange on 8 mm wide magnetic tape cartridge – Helical scan recording – HH-1 format
ISO/IEC 15731:1998 Information technology – 12,65 mm wide magnetic tape cassette for information interchange – Helical scan recording – DTF-1 format
ISO 15744:2002 Hand-held non-electric power tools – Noise measurement code – Engineering method (grade 2)
ISO 15747:2010 Plastic containers for intravenous injections
ISO 15752:2010 Ophthalmic instruments – Endoilluminators – Fundamental requirements and test methods for optical radiation safety
ISO/IEC 15757:1998 Information technology – Data interchange on 8 mm wide magnetic tape cartridge – Helical scan recording – DA-2 format
ISO 15759:2005 Medical infusion equipment – Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process
ISO/TS 15768:2000 Measurement of liquid velocity in open channels – Design, selection and use of electromagnetic current meters
ISO 15769:2010 Hydrometry – Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods
ISO/IEC 15771:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Common information additional network feature
ISO/IEC 15772:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Common Information additional network feature
ISO/IEC 15773:1998 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Transit counter additional network feature
ISO/IEC 15776:2001 VME64bus - Specification
ISO/IEC 15780:1998 Information technology – 8 mm wide magnetic tape cartridge – Helical scan recording – AIT-1 format
ISO 15782 Certificate management for financial services^{[Note 3]}
- ISO 15782-1:2009 Part 1: Public key certificates
- ISO 15782-2:2001 Part 2: Certificate extensions
ISO 15783:2002 Seal-less rotodynamic pumps – Class II – Specification
ISO 15784 Intelligent transport systems (ITS) – Data exchange involving roadside modules communication
- ISO 15784-1:2008 Part 1: General principles and documentation framework of application profiles
- ISO 15784-2:2015 Part 2: Centre to field device communications using SNMP
- ISO 15784-3:2008 Part 3: Application profile-data exchange (AP-DATEX)
ISO 15785:2002 Technical drawings – Symbolic presentation and indication of adhesive, fold and pressed joints
ISO 15786:2008 Technical drawings – Simplified representation and dimensioning of holes
ISO 15787:2016 Technical product documentation – Heat-treated ferrous parts – Presentation and indications
ISO 15798:2013 Ophthalmic implants – Ophthalmic viscosurgical devices
ISO/IEC 15802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Common specifications
- ISO/IEC 15802-1:1995 Part 1: Medium Access Control (MAC) service definition
- ISO/IEC 15802-3:1998 Part 3: Media Access Control (MAC) Bridges
ISO/IEC 15816:2002 Information technology - Security techniques - Security information objects for access control
ISO 15836:2009 Information and documentation – The Dublin Core metadata element set
- ISO 15836-1:2017 Part 1: Core elements
ISO/TR 15847:2008 Graphic technology - Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment
ISO 15849:2001 Ships and marine technology – Guidelines for implementation of a fleet management system network
ISO/IEC 15851:1999 Information technology - Communication protocol - Open MUMPS Interconnect
ISO/IEC 15852:1999 Information technology - Programming languages - M Windowing API
ISO 15867:2003 Intermediate bulk containers (IBCs) for non-dangerous goods – Terminology
ISO 15870:2000 Powered industrial trucks - Safety signs and hazard pictorials - General principles
ISO 15878:2008 Road construction and maintenance equipment – Asphalt pavers – Terminology and commercial specifications
ISO/IEC 15895:1999 Information technology – Data interchange on 12,7 mm 128-track magnetic tape cartridges – DLT 3-XT format
ISO/IEC 15896:1999 Information technology – Data interchange on 12,7 mm 208-track magnetic tape cartridges – DLT 5 format
ISO/IEC 15897:2011 Information technology - User interfaces - Procedures for the registration of cultural elements
ISO/IEC 15898:1998 Information technology - Data interchange on 356 mm optical disk cartridges - WORM, using phase change technology - Capacity: 14,8 Gbytes and 25 Gbytes per cartridge
ISO/IEC 15899:1998 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Service description – Broadband connection oriented bearer services
ISO 15902:2004 Optics and photonics - Diffractive optics - Vocabulary
ISO/IEC 15909 Systems and software engineering - High-level Petri nets
- ISO/IEC 15909-1:2004 Part 1: Concepts, definitions and graphical notation
- ISO/IEC 15909-2:2011 Part 2: Transfer format
ISO 15919:2001 Information and documentation - Transliteration of Devanagari and related Indic scripts into Latin characters
ISO 15924:2004 Information and documentation – Codes for the representation of names of scripts
ISO 15926 - Integration of Life-cycle Data for Process Plants including Oil and Gas Production Facilities
ISO 15927 Hygrothermal performance of buildings – Calculation and presentation of climatic data
- ISO 15927-1:2003 Part 1: Monthly means of single meteorological elements
- ISO 15927-2:2009 Part 2: Hourly data for design cooling load
- ISO 15927-3:2009 Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data
- ISO 15927-4:2005 Part 4: Hourly data for assessing the annual energy use for heating and cooling
- ISO 15927-5:2004 Part 5: Data for design heat load for space heating
- ISO 15927-6:2007 Part 6: Accumulated temperature differences (degree-days)
ISO 15930 Graphic technology – Prepress digital data exchange using PDF^{[Note 3]}
ISO 15932:2013 Microbeam analysis - Analytical electron microscopy - Vocabulary
ISO/IEC 15938 Information technology - Multimedia content description interface
ISO/IEC/IEEE 15939:2017 Systems and software engineering - Measurement process
ISO/IEC 15940:2013 Systems and software engineering - Software Engineering Environment Services
ISO/IEC TR 15942:2000 Information technology - Programming languages - Guide for the use of the Ada programming language in high integrity systems
ISO/IEC 15944 Information technology - Business operational view
- ISO/IEC 15944-1:2011 Part 1: Operational aspects of open-edi for implementation
- ISO/IEC 15944-2:2015 Part 2: Registration of scenarios and their components as business objects
- ISO/IEC 15944-4:2015 Part 4: Business transaction scenarios – Accounting and economic ontology
- ISO/IEC 15944-5:2008 Part 5: Identification and referencing of requirements of jurisdictional domains as sources of external constraints
- ISO/IEC TR 15944-6:2015 Part 6: Technical introduction to e-Business modelling
- ISO/IEC 15944-7:2009 Part 7: eBusiness vocabulary
- ISO/IEC 15944-8:2012 Part 8: Identification of privacy protection requirements as external constraints on business transactions
- ISO/IEC 15944-9:2015 Part 9: Business transaction traceability framework for commitment exchange
- ISO/IEC 15944-10:2013 Part 10: IT-enabled coded domains as semantic components in business transactions
- ISO/IEC 15944-20:2015 Part 20: Linking business operational view to functional service view
ISO/IEC 15945:2002 Information technology - Security techniques - Specification of TTP services to support the application of digital signatures
ISO/IEC 15946 Information technology - Security techniques - Cryptographic techniques based on elliptic curves
- ISO/IEC 15946-1:2016 Part 1: General
- ISO/IEC 15946-5:2017 Part 5: Elliptic curve generation
ISO/IEC 15948 Information technology – Computer graphics and image processing – Portable Network Graphics (PNG): Functional specification
ISO/IEC 15953:1999 Information technology – Open Systems Interconnection – Service definition for the Application Service Object Association Control Service Element
ISO/IEC 15954:1999 Information technology – Open Systems Interconnection – Connection-mode protocol for the Application Service Object Association Control Service Element
ISO/IEC 15955:1999 Information technology – Open Systems Interconnection – Connectionless protocol for the Application Service Object Association Control Service Element
ISO/IEC 15961 Information technology - Radio frequency identification (RFID) for item management: Data protocol
- ISO/IEC 15961-1:2013 Part 1: Application interface
- ISO/IEC 15961-4:2016 Part 4: Application interface commands for battery assist and sensor functionality
ISO/IEC 15962:2013 Information technology - Radio frequency identification (RFID) for item management - Data protocol: data encoding rules and logical memory functions
ISO/IEC 15963:2009 Information technology - Radio frequency identification for item management - Unique identification for RF tags
ISO 15970 Natural gas – Measurement of properties – Volumetric properties: density, pressure, temperature and compression factor
ISO 15971:2008 Natural gas – Measurement of properties – Calorific value and Wobbe index
ISO 15985:2004 Plastics – Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions – Method by analysis of released biogas
ISO/IEC 15991:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Priority Interruption and Call Priority Interruption Protection supplementary services
ISO/IEC 15992:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Priority Interruption and Call Priority Interruption Protection supplementary services

ISO 16000 – ISO 16999

ISO/TR 16015:2003 Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
ISO 16016:2016 Technical product documentation – Protection notices for restricting the use of documents and products
ISO 16020:2005 Steel for the reinforcement and prestressing of concrete – Vocabulary
ISO/IEC 16022:2006 Information technology - Automatic identification and data capture techniques - Data Matrix bar code symbology specification
ISO/IEC 16023:2000 Information technology - International symbology specification - MaxiCode
ISO 16032:2004 Acoustics – Measurement of sound pressure level from service equipment in buildings – Engineering method
ISO 16034:2002 Ophthalmic optics – Specifications for single-vision ready-to-wear near- vision spectacles
ISO 16039:2004 Road construction and maintenance equipment – Slipform pavers – Definitions and commercial specifications
ISO 16054:2000 Implants for surgery – Minimum data sets for surgical implants
ISO/TR 16056 Health informatics - Interoperability of telehealth systems and networks
- ISO/TR 16056-1:2004 Part 1: Introduction and definitions
- ISO/TR 16056-2:2004 Part 2: Real-time systems
ISO/TS 16058:2004 Health informatics – Interoperability of telelearning systems
ISO 16059:2007 Dentistry - Required elements for codification used in data exchange
ISO 16061:2015 Instrumentation for use in association with non-active surgical implants – General requirements
ISO 16063 Methods for the calibration of vibration and shock transducers
- ISO 16063-1:1998 Part 1: Basic concepts
- ISO 16063-11:1999 Part 11: Primary vibration calibration by laser interferometry
- ISO 16063-12:2002 Part 12: Primary vibration calibration by the reciprocity method
- ISO 16063-13:2001 Part 13: Primary shock calibration using laser interferometry
- ISO 16063-15:2006 Part 15: Primary angular vibration calibration by laser interferometry
- ISO 16063-16:2014 Part 16: Calibration by Earth's gravitation
- ISO 16063-17:2016 Part 17: Primary calibration by centrifuge
- ISO 16063-21:2003 Part 21: Vibration calibration by comparison to a reference transducer
- ISO 16063-22:2005 Part 22: Shock calibration by comparison to a reference transducer
- ISO 16063-31:2009 Part 31: Testing of transverse vibration sensitivity
- ISO 16063-32:2016 Part 32: Resonance testing – Testing the frequency and the phase response of accelerometers by means of shock excitation
- ISO 16063-33:2017 Part 33: Testing of magnetic field sensitivity
- ISO 16063-41:2011 Part 41: Calibration of laser vibrometers
- ISO 16063-42:2014 Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
- ISO 16063-43:2015 Part 43: Calibration of accelerometers by model-based parameter identification
- ISO 16063-45:2017 Part 45: In-situ calibration of transducers with built in calibration coil
ISO 16069:2004 Graphical symbols - Safety signs - Safety way guidance systems (SWGS)
ISO/IEC 16085:2006 Systems and software engineering - Life cycle processes - Risk management
ISO 16087:2013 Implants for surgery – Roentgen stereophotogrammetric analysis for the assessment of migration of orthopaedic implants
ISO 16103:2005 Packaging - Transport packaging for dangerous goods - Recycled plastics material
ISO 16106:2006 Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings—Guidelines for the application of ISO 9001
ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
ISO 16140 Microbiology of the food chain – Method validation
- ISO 16140-1:2016 Part 1: Vocabulary
- ISO 16140-2:2016 Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method
ISO 16142 Medical devices – Recognized essential principles of safety and performance of medical devices
- ISO 16142-1:2016 Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
- ISO 16142-2:2017 Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
ISO/TR 16153:2004 Piston-operated volumetric instruments – Determination of uncertainty for volume measurements made using the photometric method
ISO 16155:2006 Ships and marine technology – Computer applications – Shipboard loading instruments
ISO 16165:2013 Ships and marine technology - Marine environment protection - Terminology relating to oil spill response
ISO/IEC TR 16166:2010 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Security of session-based communications
ISO/IEC TR 16167:2011 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Emergency calls
ISO 16175 Information and documentation - Principles and functional requirements for records in electronic office environments
- ISO 16175-1:2010 Part 1: Overview and statement of principles
- ISO 16175-2:2011 Part 2: Guidelines and functional requirements for digital records management systems
- ISO 16175-3:2010 Part 3: Guidelines and functional requirements for records in business systems
ISO 16192:2017 Space systems - Experience gained in space projects (lessons learned) - Principles and guidelines
ISO/TS 16195:2013 Nanotechnologies – Guidance for developing representative test materials consisting of nano-objects in dry powder form
ISO/TR 16196:2016 Nanotechnologies – Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials
ISO/TR 16197:2014 Nanotechnologies – Compilation and description of toxicological screening methods for manufactured nanomaterials
ISO 16212:2017 Cosmetics – Microbiology – Enumeration of yeast and mould
ISO/TR 16218:2013 Packaging and the environment - Processes for chemical recovery
ISO 16232 Road vehicles – Cleanliness of components of fluid circuits
- ISO 16232-1:2007 Part 1: Vocabulary
- ISO 16232-2:2007 Part 2: Method of extraction of contaminants by agitation
- ISO 16232-3:2007 Part 3: Method of extraction of contaminants by pressure rinsing
- ISO 16232-4:2007 Part 4: Method of extraction of contaminants by ultrasonic techniques
- ISO 16232-5:2007 Part 5: Method of extraction of contaminants on functional test bench
- ISO 16232-6:2007 Part 6: Particle mass determination by gravimetric analysis
- ISO 16232-7:2007 Part 7: Particle sizing and counting by microscopic analysis
- ISO 16232-8:2007 Part 8: Particle nature determination by microscopic analysis
- ISO 16232-9:2007 Part 10: Particle sizing and counting by automatic light extinction particle counter
- ISO 16232-10:2007 Part 10: Expression of results
ISO 16239:2013 Metric series wires for measuring screw threads
ISO 16245:2009 Information and documentation - Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents
ISO 16249:2013 Springs – Symbols
ISO 16254:2016 Acoustics – Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation – Engineering method
ISO/IEC 16262:2011 Information technology – Programming languages, their environments and system software interfaces – ECMAScript language specification
ISO 16269 Statistical interpretation of data
- ISO 16269-4:2010 Part 4: Detection and treatment of outliers
- ISO 16269-6:2014 Part 6: Determination of statistical tolerance intervals
- ISO 16269-7:2001 Part 7: Median - Estimation and confidence intervals
- ISO 16269-8:2004 Part 8: Determination of prediction intervals
ISO/TS 16277 Health informatics – Categorial structures of clinical findings in traditional medicine
- ISO/TS 16277-1:2015 Part 1: Traditional Chinese, Japanese and Korean medicine
ISO 16278:2016 Health informatics – Categorial structure for terminological systems of human anatomy
ISO 16284:2006 Ophthalmic optics – Information interchange for ophthalmic optical equipment
ISO/TR 16310:2014 Symbol libraries for construction and facilities management
ISO/IEC 16317:2011 Information technology – Telecommunications and information exchange between systems – proxZzzy for sleeping hosts
ISO/IEC/IEEE 16326:2009 Systems and software engineering - Life cycle processes - Project management
ISO 16331 Optics and optical instruments – Laboratory procedures for testing surveying and construction instruments
- ISO 16331-1:2017 Part 1: Performance of handheld laser distance meters
ISO 16336:2014 Applications of statistical and related methods to new technology and product development process - Robust parameter design (RPD)
ISO/IEC 16350:2015 Information technology - Systems and software engineering - Application management
ISO/IEC 16353:2011 Information technology – Telecommunications and information exchange between systems – Front-end configuration command for NFC-WI (NFC-FEC)
ISO 16355 Applications of statistical and related methods to new technology and product development process
- ISO 16355-1:2015 Part 1: General principles and perspectives of Quality Function Deployment (QFD)
- ISO 16355-2:2017 Part 2: Non-quantitative approaches for the acquisition of voice of customer and voice of stakeholder
- ISO 16355-4:2017 Part 4: Analysis of non-quantitative and quantitative Voice of Customer and Voice of Stakeholder
- ISO 16355-5:2017 Part 5: Solution strategy
- ISO/TR 16355-8:2017 Part 8: Guidelines for commercialization and life cycle
ISO/TR 16379:2014 Tissue-engineered medical products – Evaluation of anisotropic structure of articular cartilage using DT (Diffusion Tensor)-MR Imaging
ISO/IEC 16382:2000 Information technology – Data interchange on 12,7 mm 208-track magnetic tape cartridges – DLT 6 format
ISO/IEC 16388:2007 Information technology - Automatic identification and data capture techniques - Code 39 bar code symbology specification
ISO/IEC 16390:2007 Information technology - Automatic identification and data capture techniques - Interleaved 2 of 5 bar code symbology specification
ISO/TS 16401 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-2
- ISO/TS 16401-1:2012 Part 1: Test suite structure and test purposes
- ISO/TS 16401-2:2012 Part 2: Abstract test suite
ISO 16402:2008 Implants for surgery – Acrylic resin cement – Flexural fatigue testing of acrylic resin cements used in orthopaedics
ISO/TS 16407 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-1
- ISO/TS 16407-1:2011 Part 1: Test suite structure and test purposes
- ISO/TS 16407-2:2012 Part 2: Abstract test suite
ISO/TS 16410 Electronic fee collection – Evaluation of equipment for conformity to ISO/TS 17575-3
- ISO/TS 16410-1:2011 Part 1: Test suite structure and test purposes
- ISO/TS 16410-2:2012 Part 2: Abstract test suite
ISO 16413:2013 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry – Instrumental requirements, alignment and positioning, data collection, data analysis and reporting
ISO 16428:2005 Implants for surgery – Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices
ISO 16429:2004 Implants for surgery – Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods
ISO 16437:2012 Ships and marine technology - Lifesaving and fire protection - Atmospheric oil mist detectors for ships
ISO 16439:2014 Information and documentation - Methods and procedures for assessing the impact of libraries
ISO 16443:2014 Dentistry - Vocabulary for dental implants systems and related procedure
ISO/IEC 16448:2002 Information technology - 120 mm DVD - Read-only disk
ISO/IEC 16449:2002 Information technology - 80 mm DVD - Read-only disk
ISO 16457:2014 Space systems – Space environment (natural and artificial) – The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere
ISO/TS 16460:2016 Intelligent transport systems – Communications access for land mobiles (CALM) – Communication protocol messages for global usage
ISO/IEC 16480:2015 Information technology - Automatic identification and data capture techniques - Reading and display of ORM by mobile devices
ISO 16484 Building automation and control systems (BACS)
- ISO 16484-1:2010 Part 1: Project specification and implementation
- ISO 16484-2:2004 Part 2: Hardware
- ISO 16484-3:2005 Part 3: Functions
- ISO 16484-5:2017 Part 5: Data communication protocol
- ISO 16484-6:2014 Part 6: Data communication conformance testing
ISO/IEC 16485:2000 Information technology - Mixed Raster Content (MRC)
ISO 16495:2013 Packaging - Transport packaging for dangerous goods - Test methods
ISO/IEC 16500 Information technology – Generic digital audio-visual systems
- ISO/IEC 16500-1:1999 Part 1: System reference models and scenarios
- ISO/IEC 16500-2:1999 Part 2: System dynamics, scenarios and protocol requirements
- ISO/IEC 16500-3:1999 Part 3: Contours: Technology domain
- ISO/IEC 16500-4:1999 Part 4: Lower-layer protocols and physical interfaces
- ISO/IEC 16500-5:1999 Part 5: High and mid-layer protocols
- ISO/IEC 16500-6:1999 Part 6: Information representation
- ISO/IEC 16500-7:1999 Part 7: Basic security tools
- ISO/IEC 16500-8:1999 Part 8: Management architecture and protocols
- ISO/IEC 16500-9:1999 Part 9: Usage information protocols
ISO/IEC TR 16501:1999 Information technology - Generic digital audio-visual systems - Technical Report on ISO/IEC 16500 - Description of digital audio-visual functionalities
ISO/IEC 16504:2011 Information technology – Telecommunications and information exchange between systems – MAC and PHY for operation in TV white space
ISO/IEC 16509:1999 Information technology - Year 2000 terminology
ISO/IEC 16512 Information technology – Relayed multicast protocol
- ISO/IEC 16512-1:2016 Information technology – Relayed Multicast Control Protocol (RMCP) – Framework
- ISO/IEC 16512-2:2016 Information technology – Relayed multicast protocol: Specification for simplex group applications
ISO/IEC 16513:2005 Information technology – Group management protocol
ISO/HL7 16527:2016 Health informatics – HL7 Personal Health Record System Functional Model, Release 1 (PHRS FM)
ISO 16548:2012 Ships and marine technology - Ship design - General guidance on emergency towing procedures
ISO 16549 Textiles – Unevenness of textile strands – Capacitance method
ISO/TS 16550:2014 Nanotechnologies – Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus
ISO 16559:2014 Solid biofuels – Terminology, definitions and descriptions
ISO 16571:2014 Systems for evacuation of plume generated by medical devices
ISO 16587:2004 Mechanical vibration and shock – Performance parameters for condition monitoring of structures
ISO 16589 Rotary shaft lip-type seals incorporating thermoplastic sealing elements
- ISO 16589-2:2011 Part 2: Vocabulary
ISO 16609:2012 Financial services – Requirements for message authentication using symmetric techniques
ISO 16610 Geometrical product specifications (GPS) – Filtration
ISO 16612 Graphic technology - Variable printing data exchange
- ISO 16612-1:2005 Part 1: Using PPML 2.1 and PDF 1.4 (PPML/VDX-2005)
- ISO 16612-2:2010 Part 2: Using PDF/X-4 and PDF/X-5 (PDF/VT-1 and PDF/VT-2)
ISO 16613 Graphic technology - Variable content replacement
- ISO 16613-1:2017 Part 1: Using PDF/X for variable content replacement (PDF/VCR-1)
ISO 16622:2002 Meteorology – Sonic anemometers/thermometers – Acceptance test methods for mean wind measurements
ISO 16628:2008 Tracheobronchial tubes – Sizing and marking
ISO 16638 Radiological protection - Monitoring and internal dosimetry for specific materials
- ISO 16638-1:2015 Part 1: Inhalation of uranium compounds
ISO 16641:2014 Measurement of radioactivity in the environment - Air - Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors
ISO 16642:2003 Computer applications in terminology - Terminological markup framework
ISO 16649 Microbiology of the food chain – Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli^{[Note 3]}
- ISO 16649-1:2001 Part 1: Colony-count technique at 44 degrees C using membranes and 5-bromo-4-chloro-3-indolyl beta-D-glucuronide
- ISO 16649-2:2001 Part 2: Colony-count technique at 44 degrees C using 5-bromo-4-chloro-3-indolyl beta-D-glucuronide
- ISO 16649-3:2015 Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-ß-D-glucuronide
ISO 16654:2001 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Escherichia coli O157
ISO 16671:2015 Ophthalmic implants – Irrigating solutions for ophthalmic surgery
ISO 16672:2015 Ophthalmic implants – Ocular endotamponades
ISO 16682:2015 Aerospace series – Terminology for clamping devices
ISO 16684 Graphic technology - Extensible metadata platform (XMP) specification
- ISO 16684-1:2012 Part 1: Data model, serialization and core properties
- ISO 16684-2:2014 Part 2: Description of XMP schemas using RELAX NG
ISO/TR 16705:2016 Statistical methods for implementation of Six Sigma - Selected illustrations of contingency table analysis
ISO 16706:2016 Ships and marine technology - Marine evacuation systems - Load calculations and testing
ISO 16707:2016 Ships and marine technology - Marine evacuation systems - Determination of capacity
ISO 16750 Road vehicles – Environmental conditions and testing for electrical and electronic equipment
ISO 16760:2014 Graphic technology - Prepress data exchange - Preparation and visualization of RGB images to be used in RGB-based graphics arts workflows
ISO/TR 16764:2003 Lifts, escalators and passenger conveyors – Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility
ISO/TS 16785:2014 Electronic Fee Collection (EFC) – Interface definition between DSRC-OBE and external in-vehicle devices
ISO/TR 16786:2015 Intelligent transport systems – The use of simulation models for evaluation of traffic management systems – Input parameters and reporting template for simulation of traffic signal control systems
ISO 16787:2016 Intelligent transport systems – Assisted Parking System (APS) – Performance requirements and test procedures
ISO/TS 16791:2014 Health informatics – Requirements for international machine-readable coding of medicinal product package identifiers
ISO 16792:2015 Technical product documentation - Digital product definition data practices
ISO 16818:2008 Building environment design – Energy efficiency – Terminology
ISO/IEC 16824:1999 Information technology - 120 mm DVD rewritable disk (DVD-RAM)
ISO/IEC 16825:1999 Information technology - Case for 120 mm DVD-RAM disks
ISO 16832:2006 Acoustics – Loudness scaling by means of categories
ISO 16840 Wheelchair seating
- ISO 16840-1:2006 Part 1: Vocabulary, reference axis convention and measures for body segments, posture and postural support surfaces
ISO/TS 16843 Health informatics – Categorial structures for representation of acupuncture
- ISO/TS 16843-1:2016 Part 1: Acupuncture points
- ISO/TS 16843-2:2015 Part 2: Needling
ISO 16894:2009 Wood-based panels – Oriented strand board (OSB) – Definitions, classification and specifications
ISO 16902 Hydraulic fluid power – Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method
- ISO 16902-1:2003 Part 1: Pumps
ISO 16919:2014 Space data and information transfer systems – Requirements for bodies providing audit and certification of candidate trustworthy digital repositories
ISO/TS 16949 Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations [Withdrawn: replaced by IATF 16949:2016]
ISO/TS 16951:2004 Road vehicles – Ergonomic aspects of transport information and control systems (TICS) – Procedures for determining priority of on-board messages presented to drivers
ISO/TS 16955:2016 Prosthetics – Quantification of physical parameters of ankle foot devices and foot units
ISO/IEC 16963:2017 Information technology - Digitally recorded media for information interchange and storage - Test method for the estimation of lifetime of optical disks for long-term data storage
ISO/IEC 16969:1999 Information technology - Data interchange on 120 mm optical disk cartridges using +RW format - Capacity: 3,0 Gbytes and 6,0 Gbytes
ISO 16971:2015 Ophthalmic instruments – Optical coherence tomograph for the posterior segment of the human eye
ISO/TR 16982:2002 Ergonomics of human-system interaction – Usability methods supporting human-centred design

ISO 17000 – ISO 17999

ISO/IEC 17000:2004 Conformity assessment - Vocabulary and general principles
ISO/IEC 17007:2009 Conformity assessment – Guidance for drafting normative documents suitable for use for conformity assessment
ISO/IEC 17011:2017 Conformity assessment – Requirements for accreditation bodies accrediting conformity assessment bodies
ISO/IEC 17020:2012 Conformity assessment—Requirements for the operation of various types of bodies performing inspection
ISO/IEC 17021:2011 Conformity assessment—Requirements for bodies providing audit and certification of management systems
- ISO/IEC 17021-1:2015 Part 1: Requirements
- ISO/IEC 17021-2:2016 Part 2: Competence requirements for auditing and certification of environmental management systems
- ISO/IEC 17021-3:2017 Part 3: Competence requirements for auditing and certification of quality management systems
- ISO/IEC TS 17021-4:2013 Part 4: Competence requirements for auditing and certification of event sustainability management systems
- ISO/IEC TS 17021-5:2014 Part 5: Competence requirements for auditing and certification of asset management systems
- ISO/IEC TS 17021-6:2014 Part 6: Competence requirements for auditing and certification of business continuity management systems
- ISO/IEC TS 17021-7:2014 Part 7: Competence requirements for auditing and certification of road traffic safety management systems
- ISO/IEC TS 17021-9:2016 Part 9: Competence requirements for auditing and certification of anti-bribery management systems
ISO/IEC TS 17022:2012 Conformity assessment—Requirements and recommendations for content of a third-party audit report on management systems
ISO/IEC TS 17023:2013 Conformity assessment—Guidelines for determining the duration of management system certification audits
ISO/IEC 17024:2012 Conformity assessment – General requirements for bodies operating certification of persons
ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
ISO/IEC TR 17026:2015 Conformity assessment – Example of a certification scheme for tangible products
ISO/IEC TS 17027:2014 Conformity assessment – Vocabulary related to competence of persons used for certification of persons
ISO/IEC TR 17028:2017 Conformity assessment – Guidelines and examples of a certification scheme for services
ISO/IEC 17030:2003 Conformity assessment – General requirements for third-party marks of conformity
ISO 17034:2016 General requirements for the competence of reference material producers
ISO/IEC 17040:2005 Conformity assessment – General requirements for peer assessment of conformity assessment bodies and accreditation bodies
ISO/IEC 17043:2010 Conformity assessment – General requirements for proficiency testing
ISO 17049:2013 Accessible design - Application of braille on signage, equipment and appliances
ISO/IEC 17050:2004 Conformity assessment — Supplier's declaration of conformity
- ISO/IEC 17050-1:2004 Part 1: General requirements
- ISO/IEC 17050-2:2004 Part 2: Supporting documentation
ISO/IEC 17065:2012 Conformity assessment—Requirements for bodies certifying products, processes and services
ISO 17066:2007 Hydraulic tools - Vocabulary
ISO/IEC 17067:2013 Conformity assessment – Fundamentals of product certification and guidelines for product certification schemes
ISO/TR 17068:2012 Information and documentation - Trusted third party repository for digital records
ISO 17075 Leather - Chemical determination of chromium(VI) content in leather
- ISO 17075-1:2017 Part 1: Colorimetric method
- ISO 17075-2:2017 Part 2: Chromatographic method
ISO 17080:2005 Manually portable agricultural and forestry machines and powered lawn and garden equipment - Design principles for single-panel product safety labels
ISO 17088:2012 Specifications for compostable plastics
ISO 17089 Measurement of fluid flow in closed conduits – Ultrasonic meters for gas
- ISO 17089-1:2010 Part 1: Meters for custody transfer and allocation measurement
- ISO 17089-2:2012 Part 2: Meters for industrial applications
ISO 17090 Health informatics – Public key infrastructure
- ISO 17090-1:2013 Part 1: Overview of digital certificate services
- ISO 17090-2:2015 Part 2: Certificate profile
- ISO 17090-3:2008 Part 3: Policy management of certification authority
- ISO 17090-4:2014 Part 4: Digital Signatures for healthcare documents
- ISO 17090-5:2017 Part 5: Authentication using Healthcare PKI credentials
ISO/TR 17098:2013 Packaging material recycling - Report on substances and materials which may impede recycling
ISO 17100:2015 Translation services—Requirements for translation services
ISO 17115:2007 Health informatics - Vocabulary of compositional terminological systems
ISO/TS 17117:2002 Health informatics - Controlled health terminology - Structure and high-level indicators
ISO/TR 17119:2005 Health informatics – Health informatics profiling framework
ISO 17123 Optics and optical instruments – Field procedures for testing geodetic and surveying instruments
- ISO 17123-1:2014 Part 1: Theory
- ISO 17123-2:2001 Part 2: Levels
- ISO 17123-3:2001 Part 3: Theodolites
- ISO 17123-4:2012 Part 4: Electro-optical distance meters (EDM measurements to reflectors)
- ISO 17123-5:2012 Part 5: Total stations
- ISO 17123-6:2012 Part 6: Rotating lasers
- ISO 17123-7:2005 Part 7: Optical plumbing instruments
- ISO 17123-8:2015 Part 8: GNSS field measurement systems in real-time kinematic (RTK)
ISO/TS 17137:2014 Cardiovascular implants and extracorporeal systems – Cardiovascular absorbable implants
ISO 17166:1999 Erythema reference action spectrum and standard erythema dose
ISO 17185 Intelligent transport systems – Public transport user information
- ISO 17185-1:2014 Part 1: Standards framework for public information systems
- ISO/TR 17185-2:2015 Part 2: Public transport data and interface standards catalogue and cross references
- ISO/TR 17185-3:2015 Part 3: Use cases for journey planning systems and their interoperation
ISO/TS 17187:2013 Intelligent transport systems – Electronic information exchange to facilitate the movement of freight and its intermodal transfer – Governance rules to sustain electronic information exchange methods
ISO/TS 17200:2013 Nanotechnology – Nanoparticles in powder form – Characteristics and measurements
ISO 17201 Acoustics – Noise from shooting ranges
- ISO 17201-1:2005 Part 1: Determination of muzzle blast by measurement
- ISO 17201-2:2006 Part 2: Estimation of muzzle blast and projectile sound by calculation
- ISO 17201-3:2010 Part 3: Guidelines for sound propagation calculations
- ISO 17201-4:2006 Part 4: Prediction of projectile sound
- ISO 17201-5:2010 Part 5: Noise management
ISO 17202 Textiles – Determination of twist in single spun yarns – Untwist/retwist method
ISO/IEC 17203:2017 Information technology – Open Virtualization Format (OVF) specification
ISO 17208 Underwater acoustics – Quantities and procedures for description and measurement of underwater sound from ships
- ISO 17208-1:2016 Part 1: Requirements for precision measurements in deep water used for comparison purposes
ISO 17218:2014 Sterile acupuncture needles for single use
ISO/TS 17251:2016 Health informatics – Business requirements for a syntax to exchange structured dose information for medicinal products
ISO 17258:2015 Statistical methods - Six Sigma - Basic criteria underlying benchmarking for Six Sigma in organisations
ISO 17261:2012 Intelligent transport systems – Automatic vehicle and equipment identification – Intermodal goods transport architecture and terminology
ISO 17262:2012 Intelligent transport systems – Automatic vehicle and equipment identification – Numbering and data structures
ISO 17263:2012 Intelligent transport systems – Automatic vehicle and equipment identification – System parameters
ISO 17264:2009 Intelligent transport systems – Automatic vehicle and equipment identification – Interfaces
ISO 17267:2009 Intelligent transport systems – Navigation systems – Application programming interface (API)
ISO/TR 17302:2015 Nanotechnologies – Framework for identifying vocabulary development for nanotechnology applications in human healthcare
ISO/IEC 17309:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of a circuit mode basic service and the supplementary service user-to-user signalling as a pair of on-demand inter-PINX connections
ISO/IEC 17310:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of 64 kbit/s circuit mode connections with 16 kbit/s sub-multiplexing
ISO/IEC 17311:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of 64 kbit/s circuit mode connections with 8 kbit/s sub-multiplexing
ISO 17316:2015 Information and documentation - International standard link identifier (ISLI)
ISO 17338:2009 Ships and marine technology - Drawings for fire protection - Indications of fire rating by divisions for ships and high-speed craft
ISO/IEC 17341:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4X)
ISO/IEC 17342:2004 Information technology - 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD re-recordable disk (DVD-RW)
ISO/IEC 17343:2007 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Signalling interworking between QSIG and SIP – Basic services
ISO/IEC 17344:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +R format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 16X)
ISO/IEC 17345:2006 Information technology - Data Interchange on 130 mm Rewritable and Write Once Read Many Ultra Density Optical (UDO) Disk Cartridges - Capacity: 30 Gbytes per Cartridge - First Generation
ISO/IEC 17346:2005 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 1,3 Gbytes per cartridge
ISO/TR 17350:2013 Direct Marking on Plastic Returnable Transport Items (RTIs)
ISO 17351:2013 Packaging - Braille on packaging for medicinal products
ISO 17359:2011 Condition monitoring and diagnostics of machines – General guidelines
ISO 17361:2017 Intelligent transport systems – Lane departure warning systems – Performance requirements and test procedures
ISO 17363:2013 Supply chain applications of RFID - Freight containers
ISO 17364:2013 Supply chain applications of RFID - Returnable transport items (RTIs) and returnable packaging items (RPIs)
ISO 17365:2013 Supply chain applications of RFID - Transport units
ISO 17366:2013 Supply chain applications of RFID - Product packaging
ISO 17367:2013 Supply chain applications of RFID - Product tagging
ISO 17369:2013 Statistical data and metadata exchange (SDMX)
ISO/TR 17370:2013 Application Guideline on Data Carriers for Supply Chain Management
ISO/TR 17384:2008 Intelligent transport systems – Interactive centrally determined route guidance (CDRG) – Air interface message set, contents and format
ISO 17387:2008 Intelligent transport systems – Lane change decision aid systems (LCDAS) – Performance requirements and test procedures
ISO 17398:2004 Safety colours and safety signs - Classification, performance and durability of safety signs
ISO 17410:2001 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of psychrotrophic microorganisms
ISO/IEC 17417:2011 Information technology – Telecommunications and information exchange between systems – Short Distance Visible Light Communication (SDVLC)
ISO/TS 17419:2014 Intelligent transport systems – Cooperative systems – Classification and management of ITS applications in a global context
ISO/TS 17423:2014 Intelligent transport systems – Cooperative systems – ITS application requirements and objectives for selection of communication profiles
ISO/TR 17424:2015 Intelligent transport systems – Cooperative systems – State of the art of Local Dynamic Maps concepts
ISO/TS 17425:2016 Intelligent transport systems – Cooperative systems – Data exchange specification for in-vehicle presentation of external road and traffic related data
ISO/TS 17426:2016 Intelligent transport systems – Cooperative systems – Contextual speeds
ISO 17427 Intelligent transport systems – Cooperative ITS^{[Note 3]}
- ISO/TS 17427:2014 Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems
- ISO/TR 17427-2:2015 Part 2: Framework overview
- ISO/TR 17427-3:2015 Part 3: Concept of operations (ConOps) for 'core' systems
- ISO/TR 17427-4:2015 Part 4: Minimum system requirements and behaviour for core systems
- ISO/TR 17427-6:2015 Part 6: 'Core system' risk assessment methodology
- ISO/TR 17427-7:2015 Part 7: Privacy aspects
- ISO/TR 17427-8:2015 Part 8: Liability aspects
- ISO/TR 17427-9:2015 Part 9: Compliance and enforcement aspects
- ISO/TR 17427-10:2015 Part 10: Driver distraction and information display
ISO/TS 17429:2017 Intelligent transport systems – Cooperative ITS – ITS station facilities for the transfer of information between ITS stations
ISO 17432:2004 Health informatics – Messages and communication – Web access to DICOM persistent objects
ISO 17438 Intelligent transport systems – Indoor navigation for personal and vehicle ITS station
- ISO 17438-1:2016 Part 1: General information and use case definition
ISO/TS 17439:2014 Health informatics – Development of terms and definitions for health informatics glossaries
ISO 17442:2012 Financial services - Legal Entity Identifier (LEI)
ISO/TS 17444 Electronic fee collection – Charging performance
- ISO/TS 17444-1:2017 Part 1: Metrics
- ISO/TS 17444-2:2017 Part 2: Examination framework
ISO 17450 Geometrical product specifications (GPS) - Basic concepts^{[Note 3]}
- ISO 17450-1:2011 Part 1: Model for geometrical specification and verification
- ISO 17450-2:2012 Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
- ISO 17450-3:2016 Part 3: Toleranced features
- ISO 17450-4:2017 Part 4: Geometrical characteristics for quantifying GPS deviations
ISO 17451 Packaging - Codification of contents for inventories for shipments of household goods and personal effects
- ISO 17451-1:2016 Part 1: Numeric codification of inventories
- ISO/TS 17451-2:2017 Part 2: XML messaging structure for electronic transmission of inventory data
ISO/TR 17452:2007 Intelligent transport systems – Using UML for defining and documenting ITS/TICS interfaces
ISO/IEC 17462:2000 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-4 format
ISO/TR 17465 Intelligent transport systems - Cooperative ITS
- ISO/TR 17465-1:2014 Part 1: Terms and definitions
- ISO/TR 17465-2:2015 Part 2: Guidelines for standards documents
- ISO/TR 17465-3:2015 Part 3: Release procedures for standards documents
ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
ISO 17468:2016 Microbiology of the food chain – Technical requirements and guidance on establishment or revision of a standardized reference method
ISO 17469 Document management - Strategy markup language (StratML)
- ISO 17469-1:2015 Part 1: StratML core elements
ISO 17480:2015 Packaging - Accessible design - Ease of opening
ISO 17488:2016 Road vehicles – Transport information and control systems – Detection-response task (DRT) for assessing attentional effects of cognitive load in driving
ISO/TS 17503:2015 Statistical methods of uncertainty evaluation - Guidance on evaluation of uncertainty using two-factor crossed designs
ISO/PAS 17506 Industrial automation systems and integration – COLLADA digital asset schema specification for 3D visualization of industrial data
ISO 17510:2015 Medical devices – Sleep apnoea breathing therapy – Masks and application accessories
ISO 17515 Intelligent transport systems – Communications access for land mobiles (CALM) – Evolved universal terrestrial radio access network (E-UTRAN)
- ISO 17515-1:2015 Part 1: General usage
ISO 17516:2014 Cosmetics – Microbiology – Microbiological limits
ISO/TR 17522:2015 Health informatics – Provisions for health applications on mobile/smart devices
ISO 17523:2016 Health informatics – Requirements for electronic prescriptions
ISO 17526:2003 Optics and optical instruments – Lasers and laser-related equipment – Lifetime of lasers
ISO 17532:2007 Stationary equipment for agriculture – Data communications network for livestock farming
ISO 17534 Acoustics – Software for the calculation of sound outdoors
- ISO 17534-1:2015 Part 1: Quality requirements and quality assurance
- ISO/TR 17534-2:2014 Part 2: General recommendations for test cases and quality assurance interface
- ISO/TR 17534-3:2015 Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1
ISO/IEC 17549 Information technology – User interface guidelines on menu navigation
- ISO/IEC 17549-2:2015 Part 2: Navigation with 4-direction devices
ISO/IEC 17568:2013 Information technology – Telecommunications and information exchange between systems – Close proximity electric induction wireless communications
ISO 17572 Intelligent transport systems (ITS) – Location referencing for geographic databases
- ISO 17572-1:2015 Part 1: General requirements and conceptual model
- ISO 17572-2:2015 Part 2: Pre-coded location references (pre-coded profile)
- ISO 17572-3:2015 Part 3: Dynamic location references (dynamic profile)
ISO 17573:2010 Electronic fee collection – Systems architecture for vehicle-related tolling
ISO/TS 17574:2017 Electronic fee collection – Guidelines for security protection profiles
ISO 17575 Electronic fee collection – Application interface definition for autonomous systems
- ISO 17575-1:2016 Part 1: Charging
- ISO 17575-2:2016 Part 2: Communication and connection to the lower layers
- ISO 17575-3:2016 Part 3: Context data
ISO/TS 17582:2014 Quality management systems – Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government
ISO/IEC 17592:2004 Information technology - 120 mm (4,7 Gbytes per side) and 80 mm (1,46 Gbytes per side) DVD rewritable disk (DVD-RAM)
ISO/IEC 17594:2004 Information technology - Cases for 120 mm and 80 mm DVD-RAM disks
ISO 17599:2015 Technical product documentation (TPD) – General requirements of digital mock-up for mechanical products
ISO 17604:2015 Microbiology of the food chain – Carcass sampling for microbiological analysis
ISO 17631:2002 Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape
ISO 17658:2002 Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
ISO 17659:2002 Welding - Multilingual terms for welded joints with illustrations
ISO 17677 Resistance welding - Vocabulary
- ISO 17677-1:2009 Part 1: Spot, projection and seam welding
ISO 17679:2016 Tourism and related services – Wellness spa – Service requirements
ISO 17680:2015 Tourism and related services – Thalassotherapy – Service requirements
ISO 17687:2007 Transport Information and Control Systems (TICS) – General fleet management and commercial freight operations – Data dictionary and message sets for electronic identification and monitoring of hazardous materials/dangerous goods transportation
ISO 17713 Meteorology – Wind measurements
- ISO 17713-1:2007 Part 1: Wind tunnel test methods for rotating anemometer performance
ISO 17714:2007 Meteorology – Air temperature measurements – Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
ISO 17717:2017 Meteorological balloons – Specification
ISO 17724:2003 Graphical symbols - Vocabulary
ISO/TS 17728:2015 Microbiology of the food chain – Sampling techniques for microbiological analysis of food and feed samples
ISO 17740 Building construction machinery and equipment – Concrete placing systems for stationary equipment
- ISO 17740-1:2015 Part 1: Terminology and commercial specifications
ISO/IEC 17760 Information technology - AT Attachment^{[Note 3]}
- ISO/IEC 17760-101:2015 Part 101: ATA/ATAPI Command Set (ATA8-ACS)
- ISO/IEC 17760-102:2016 Part 102: ATA/ATAPI Command set - 2 (ACS-2)
ISO 17772 Energy performance of buildings - Indoor environmental quality
- ISO 17772-1:2017 Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings
ISO 17776 Petroleum and natural gas industries – Offshore production installations – Guidelines on tools and techniques for hazard identification and risk assessment
ISO/IEC 17788:2014 Information technology - Cloud computing - Overview and vocabulary
ISO/IEC 17789:2014 Information technology - Cloud computing - Reference architecture
ISO/TR 17791:2013 Health informatics – Guidance on standards for enabling safety in health software
ISO 17799 Information technology - Security techniques - Code of Practice for Information Security Management (superseded by ISO/IEC 27002)
ISO 17800 Building environment design – Facility Smart Grid Information Model
ISO/IEC 17811 Information technology – Device control and management
- ISO/IEC 17811-1:2014 Part 1: Architecture
- ISO/IEC 17811-2:2015 Part 2: Specification of Device Control and Management Protocol
- ISO/IEC 17811-3:2014 Part 3: Specification of Reliable Message Delivery Protocol
ISO/IEC 17821:2015 Information technology – Specification of low power wireless mesh network over channel-hopped TDMA links
ISO/TS 17822 In vitro diagnostic test systems - Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens
- ISO/TS 17822-1:2014 Part 1: General requirements, terms and definitions
ISO/IEC 17825:2016 Information technology - Security techniques - Testing methods for the mitigation of non-invasive attack classes against cryptographic modules
ISO/IEC 17826:2016 Information technology - Cloud Data Management Interface (CDMI)
ISO/IEC 17839 Information technology – Identification cards – Biometric System-on-Card^{[Note 3]}
- ISO/IEC 17839-1:2014 Part 1: Core requirements
- ISO/IEC 17839-2:2015 Part 2: Physical characteristics
- ISO/IEC 17839-3:2016 Part 3: Logical information interchange mechanism
ISO 17853:2011 Wear of implant materials – Polymer and metal wear particles – Isolation and characterization
ISO/TS 17863:2013 Geometrical product specification (GPS) - Tolerancing of moveable assemblies
ISO/TS 17865:2016 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
ISO/IEC 17875:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Private User Mobility (PUM) – Registration supplementary service
ISO/IEC 17876:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol—Private User Mobility (PUM) – Registration supplementary service
ISO/IEC 17877:2000 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Private User Mobility (PUM) – Call handling additional network features
ISO/IEC 17878:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Private User Mobility (PUM) – Call handling additional network features
ISO 17893:2004 Steel wire ropes - Vocabulary, designation and classification
ISO 17894:2005 Ships and marine technology – Computer applications – General principles for the development and use of programmable electronic systems in marine applications
ISO 17901 Optics and photonics – Holography
- ISO 17901-1:2015 Part 1: Methods of measuring diffraction efficiency and associated optical characteristics of holograms
- ISO 17901-2:2015 Part 2: Methods for measurement of hologram recording characteristics
ISO 17907:2014 Ships and marine technology - Single point mooring arrangements for conventional tankers
ISO/IEC 17913:2000 Information technology – 12,7mm 128-track magnetic tape cartridge for information interchange – Parallel serpentine format
ISO/TS 17915:2013 Optics and photonics – Measurement method of semiconductor lasers for sensing
ISO/TS 17919:2013 Microbiology of the food chain – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Detection of botulinum type A, B, E and F neurotoxin-producing clostridia
ISO 17933:2000 GEDI - Generic Electronic Document Interchange
ISO/TS 17938:2014 Health informatics – Semantic network framework of traditional Chinese medicine language system
ISO 17937:2015 Dentistry - Osteotome
ISO/TS 17948:2014 Health informatics – Traditional Chinese medicine literature metadata
ISO/IEC 17960:2015 Information technology - Programming languages, their environments and system software interfaces - Code signing for source code
ISO/IEC TS 17961:2013 Information technology - Programming languages, their environments and system software interfaces - C secure coding rules
ISO/IEC 17963:2013 Web Services for Management (WS-Management) Specification
ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries – Guidelines on competency for personnel
ISO 17972 Graphic technology - Colour data exchange format (CxF/X)^{[Note 3]}
- ISO 17972-1:2015 Part 1: Relationship to CxF3 (CxF/X)
- ISO 17972-2:2016 Part 2: Scanner target data (CxF/X-2)
- ISO 17972-3:2017 Part 3: Output target data (CxF/X-3)
- ISO 17972-4:2015 Part 4: Spot colour characterisation data (CxF/X-4)
ISO/TS 17975:2015 Health informatics – Principles and data requirements for consent in the Collection, Use or Disclosure of personal health information
ISO/IEC 17982:2012 Information technology – Telecommunications and information exchange between systems – Close Capacitive Coupling Communication Physical Layer (CCCC PHY)
ISO 17987 Road vehicles – Local Interconnect Network (LIN)
- ISO 17987-2:2016 Part 2: Transport protocol and network layer services
ISO 17994:2014 Water quality – Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
ISO 17995:2005 Water quality – Detection and enumeration of thermotolerant Campylobacter species
ISO/IEC 17998:2012 Information technology - SOA Governance Framework

ISO 18000 – ISO 18999

ISO/IEC 18000 Information technology – Radio frequency identification for item management
ISO/IEC 18004:2015 Information technology – Automatic identification and data capture techniques – QR Code bar code symbology specification
ISO/IEC 18009:1999 Information technology – Programming languages – Ada: Conformity assessment of a language processor
ISO/IEC 18010:2002 Information technology - Pathways and spaces for customer premises cabling
ISO/IEC 18012 Information technology - Home Electronic System - Guidelines for product interoperability
- ISO/IEC 18012-1:2004 Part 1: Introduction
- ISO/IEC 18012-2:2012 Part 2: Taxonomy and application interoperability model
ISO/IEC 18013 Information technology – Personal identification – ISO-compliant driving license
- ISO/IEC 18013-1:2005 Part 1: Physical characteristics and basic data set
- ISO/IEC 18013-2:2008 Part 2: Machine-readable technologies
- ISO/IEC 18013-3:2017 Part 3: Access control, authentication and integrity validation
- ISO/IEC 18013-4:2011 Part 4: Test methods
ISO/IEC 18014 Information technology – Security techniques – Time-stamping services
ISO/IEC TR 18015:2006 Information technology - Programming languages, their environments and system software interfaces - Technical Report on C++ Performance
ISO/IEC TR 18016:2003 Information technology – Message Handling Systems (MHS): Interworking with Internet e-mail
ISO/IEC 18017:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the employment of Virtual Private Network scenarios
ISO/IEC TR 18018:2010 Information technology - Systems and software engineering - Guide for configuration management tool capabilities
ISO/IEC 18021:2002 Information technology – User interfaces for mobile tools for management of database communications in a client-server model
ISO/IEC 18023 Information technology – SEDRIS
- ISO/IEC 18023-1:2006 Part 1: Functional specification
- ISO/IEC 18023-2:2006 Part 2: Abstract transmittal format
- ISO/IEC 18023-3:2006 Part 3: Transmittal format binary encoding
ISO/IEC 18024 Information technology – SEDRIS language bindings
- ISO/IEC 18024-4:2006 Part 4: C
ISO/IEC 18025:2005 Information technology – Environmental Data Coding Specification (EDCS)
ISO/IEC 18026:2009 Information technology – Spatial Reference Model (SRM)
ISO/IEC 18031:2011 Information technology - Security techniques - Random bit generation
ISO/IEC 18032:2005 Information technology - Security techniques - Prime number generation
ISO/IEC 18033 Information technology – Security techniques – Encryption algorithms
- ISO/IEC 18033-1:2015 Part 1: General
- ISO/IEC 18033-2:2006 Part 2: Asymmetric ciphers
- ISO/IEC 18033-3:2010 Part 3: Block ciphers
- ISO/IEC 18033-4:2011 Part 4: Stream ciphers
- ISO/IEC 18033-5:2015 Part 5: Identity-based ciphers
ISO/IEC 18035:2003 Information technology – Icon symbols and functions for controlling multimedia software applications
ISO/IEC 18036:2003 Information technology - Icon symbols and functions for World Wide Web browser toolbars
ISO/IEC TR 18037:2008 Programming languages - C - Extensions to support embedded processors
ISO/IEC 18041 Information technology – Computer graphics, image processing and environmental data representation – Environmental Data Coding Specification (EDCS) language bindings
- ISO/IEC 18041-4:2016 Part 4: C
ISO/IEC 18042 Information technology – Computer graphics and image processing – Spatial Reference Model (SRM) language bindings
- ISO/IEC 18042-4:2006 Part 4: C
ISO/IEC 18045:2008 Information technology - Security techniques - Methodology for IT security evaluation
ISO/IEC 18046 Information technology - Radio frequency identification device performance test methods
- ISO/IEC 18046-1:2011 Part 1: Test methods for system performance
- ISO/IEC 18046-2:2011 Part 2: Test methods for interrogator performance
- ISO/IEC 18046-3:2012 Part 3: Test methods for tag performance
- ISO/IEC 18046-4:2015 Part 4: Test methods for performance of RFID gates in libraries
ISO/IEC 18047 Information technology - Radio frequency identification device conformance test methods
- ISO/IEC 18047-2:2012 Part 2: Test methods for air interface communications below 135 kHz
- ISO/IEC TR 18047-3:2011 Part 3: Test methods for air interface communications at 13,56 MHz
- ISO/IEC TR 18047-4:2004 Part 4: Test methods for air interface communications at 2,45 GHz
- ISO/IEC 18047-6:2012 Part 6: Test methods for air interface communications at 860 MHz to 960 MHz
- ISO/IEC TR 18047-7:2010 Part 7: Test methods for active air interface communications at 433 MHz
ISO/IEC 18050:2006 Information technology - Office equipment - Print quality attributes for machine readable Digital Postage Marks
ISO/IEC 18051:2012 Information technology – Telecommunications and information exchange between systems – Services for Computer Supported Telecommunications Applications (CSTA) Phase III
ISO/IEC 18052:2012 Information technology – Telecommunications and information exchange between systems – ASN.1 for Computer Supported Telecommunications Applications (CSTA) Phase III
ISO/IEC TR 18053:2000 Information technology - Telecommunications and information exchange between systems - Glossary of definitions and terminology for Computer Supported Telecommunications Applications (CSTA) Phase III
ISO/IEC 18056:2012 Information technology – Telecommunications and information exchange between systems – XML Schema Definitions for Computer Supported Telecommunications Applications (CSTA) Phase III
ISO/IEC TR 18057:2004 Information technology – Telecommunications and information exchange between systems – Using ECMA-323 (CSTA XML) in a Voice Browser Environment
ISO/TS 18062:2016 Health informatics – Categorial structure for representation of herbal medicaments in terminological systems
ISO 18064:2014 Thermoplastic elastomers – Nomenclature and abbreviated terms
ISO 18065:2015 Tourism and related services – Tourist services for public use provided by Natural Protected Areas Authorities – Requirements
ISO 18082:2014 Anaesthetic and respiratory equipment – Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
ISO 18091:2014 Quality management systems – Guidelines for the application of ISO 9001:2008 in local government
ISO/IEC 18092:2013 Information technology – Telecommunications and information exchange between systems – Near Field Communication – Interface and Protocol (NFCIP-1)
ISO/IEC 18093:1999 Information technology - Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 5,2 Gbytes per cartridge
ISO 18104:2014 Health informatics – Categorial structures for representation of nursing diagnoses and nursing actions in terminological systems
ISO/TS 18110:2015 Nanotechnologies - Vocabularies for science, technology and innovation indicators
ISO 18115 Surface chemical analysis – Vocabulary
- ISO 18115-1:2013 Part 1: General terms and terms used in spectroscopy
- ISO 18115-2:2013 Part 2: Terms used in scanning-probe microscopy
ISO 18117:2009 Surface chemical analysis – Handling of specimens prior to analysis
ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
ISO/IEC TR 18120:2016 Information technology - Learning, education, and training - Requirements for e-textbooks in education
ISO/IEC TR 18121:2015 Information technology - Learning, education and training - Virtual experiment framework
ISO/TR 18128:2014 Information and documentation - Risk assessment for records processes and systems
ISO 18129:2015 Condition monitoring and diagnostics of machines – Approaches for performance diagnosis
ISO/TS 18152 Ergonomics of human-system interaction – Specification for the process assessment of human-system issues
ISO 18158:2016 Workplace air - Terminology
ISO/TS 18173:2005 Non-destructive testing - General terms and definitions
ISO/IEC 18180:2013 Information technology - Specification for the Extensible Configuration Checklist Description Format (XCCDF) Version 1.2
ISO 18185 Freight containers – Electronic seals
ISO 18189:2016 Ophthalmic optics – Contact lenses and contact lens care products – Cytotoxicity testing of contact lenses in combination with lens care solution to evaluate lens/solution interactions
ISO 18190:2016 Anaesthetic and respiratory equipment – General requirements for airways and related equipment
ISO 18192 Implants for surgery – Wear of total intervertebral spinal disc prostheses
- ISO 18192-1:2011 Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test
- ISO 18192-2:2010 Part 2: Nucleus replacements
- ISO 18192-3:2017 Part 3: Impingement-wear testing and corresponding environmental conditions for test of lumbar prostheses under adverse kinematic conditions
ISO/TR 18196:2016 Nanotechnologies – Measurement technique matrix for the characterization of nano-objects
ISO 18215:2015 Ships and marine technology - Vessel machinery operations in polar waters - Guidelines
ISO 18232:2006 Health Informatics – Messages and communication – Format of length limited globally unique string identifiers
ISO/TS 18234 Intelligent transport systems – Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format
- ISO/TS 18234-1:2013 Part 1: Introduction, numbering and versions (TPEG1-INV)
- ISO/TS 18234-2:2013 Part 2: Syntax, semantics and framing structure (TPEG1-SSF)
- ISO/TS 18234-3:2013 Part 3: Service and network information (TPEG1-SNI)
- ISO/TS 18234-4:2006 Part 4: Road Traffic Message (RTM) application
- ISO/TS 18234-5:2006 Part 5: Public Transport Information (PTI) application
- ISO/TS 18234-6:2006 Part 6: Location referencing applications
- ISO/TS 18234-7:2013 Part 7: Parking information (TPEG1-PKI)
- ISO/TS 18234-8:2012 Part 8: Congestion and Travel Time application (TPEG1-CTT)
- ISO/TS 18234-9:2013 Part 9: Traffic event compact (TPEG1-TEC)
- ISO/TS 18234-10:2013 Part 10: Conditional access information (TPEG1-CAI)
- ISO/TS 18234-11:2013 Part 11: Location Referencing Container (TPEG1-LRC)
ISO 18241:2016 Cardiovascular implants and extracorporeal systems – Cardiopulmonary bypass systems – Venous bubble traps
ISO 18242:2016 Cardiovascular implants and extracorporeal systems – Centrifugal blood pumps
ISO 18245:2003 Retail financial services – Merchant category codes
ISO 18259:2014 Ophthalmic optics – Contact lens care products – Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms
ISO/IEC TR 18268:2013 Identification cards – Contactless integrated circuit cards – Proximity cards – Multiple PICCs in a single PCD field
ISO 18295 Customer contact centres
- ISO 18295-1:2017 Part 1: Requirements for customer contact centres
- ISO 18295-2:2017 Part 2: Requirements for clients using the services of customer contact centres
ISO/IEC 18305:2016 Information technology - Real time locating systems - Test and evaluation of localization and tracking systems
ISO/TR 18307:2001 Health informatics – Interoperability and compatibility in messaging and communication standards – Key characteristics
ISO 18308:2011 Health informatics – Requirements for an electronic health record architecture
ISO 18312 Mechanical vibration and shock – Measurement of vibration power flow from machines into connected support structures
- ISO 18312-1:2012 Part 1: Direct method
- ISO 18312-2:2012 Part 2: Indirect method
ISO/TR 18317:2017 Intelligent transport systems – Pre-emption of ITS communication networks for disaster and emergency communication – Use case scenarios
ISO 18322:2017 Space systems – General management requirements for space test centres
ISO/IEC 18328 Identification cards – ICC-managed devices
- ISO/IEC 18328-1:2015 Part 1: General framework
- ISO/IEC 18328-2:2015 Part 2: Physical characteristics and test methods for cards with devices
- ISO/IEC 18328-3:2016 Part 3: Organization, security and commands for interchange
ISO/TS 18339:2015 Endotherapy devices – Eyepiece cap and light guide connector
ISO/TS 18340:2015 Endoscopes – Trocar pins, trocar sleeves and endotherapy devices for use with trocar sleeves
ISO/TS 18344:2016 Effectiveness of paper deacidification processes
ISO 18365:2013 Hydrometry – Selection, establishment and operation of a gauging station
ISO/IEC 18367:2016 Information technology - Security techniques - Cryptographic algorithms and security mechanisms conformance testing
ISO 18369 Ophthalmic optics - Contact lenses
- ISO 18369-1:2017 Part 1: Vocabulary, classification system and recommendations for labelling specifications
- ISO 18369-2:2017 Part 2: Tolerances
- ISO 18369-3:2017 Part 3: Measurement methods
- ISO 18369-4:2017 Part 4: Physicochemical properties of contact lens materials
ISO/IEC 18370 Information technology - Security techniques - Blind digital signatures
- ISO/IEC 18370-1:2016 Part 1: General
- ISO/IEC 18370-2:2016 Part 2: Discrete logarithm based mechanisms
ISO/IEC 18372:2004 Information technology – RapidIO interconnect specification
ISO/TR 18476:2017 Ophthalmic optics and instruments – Free form technology – Spectacle lenses and measurement
ISO/IEC 18384 Information technology - Reference Architecture for Service Oriented Architecture (SOA RA)
- ISO/IEC 18384-1:2016 Part 1: Terminology and concepts for SOA
- ISO/IEC 18384-2:2016 Part 2: Reference Architecture for SOA Solutions
- ISO/IEC 18384-3:2016 Part 3: Service Oriented Architecture ontology
ISO 18385:2016 Minimizing the risk of human DNA contamination in products used to collect, store and analyze biological material for forensic purposes – Requirements
ISO 18388:2016 Technical product documentation (TPD) – Relief grooves – Types and dimensioning
ISO 18391:2016 Geometrical product specifications (GPS) - Population specification
ISO/TR 18401:2017 Nanotechnologies - Plain language explanation of selected terms from the ISO/IEC 80004 series
ISO 18404:2015 Quantitative methods in process improvement - Six Sigma - Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation
ISO 18405:2017 Underwater acoustics - Terminology
ISO 18406:2017 Underwater acoustics – Measurement of radiated underwater sound from percussive pile driving
ISO 18414:2006 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
ISO 18415:2017 Cosmetics – Microbiology – Detection of specified and non-specified microorganisms
ISO 18416:2015 Cosmetics – Microbiology – Detection of Candida albicans
ISO 18431 Mechanical vibration and shock – Signal processing
- ISO 18431-1:2005 Part 1: General introduction
- ISO 18431-2:2004 Part 2: Time domain windows for Fourier Transform analysis
- ISO 18431-3:2014 Part 3: Methods of time-frequency analysis
- ISO 18431-4:2007 Part 4: Shock-response spectrum analysis
ISO 18434 Condition monitoring and diagnostics of machines – Thermography
- ISO 18434-1:2008 Part 1: General procedures
ISO 18436 Condition monitoring and diagnostics of machines – Requirements for qualification and assessment of personnel
- ISO 18436-1:2012 Part 1: Requirements for assessment bodies and the assessment process
- ISO 18436-2:2014 Part 2: Vibration condition monitoring and diagnostics
- ISO 18436-3:2012 Part 3: Requirements for training bodies and the training process
- ISO 18436-4:2014 Part 4: Field lubricant analysis
- ISO 18436-5:2012 Part 5: Lubricant laboratory technician/analyst
- ISO 18436-6:2014 Part 6: Acoustic emission
- ISO 18436-7:2014 Part 7: Thermography
- ISO 18436-8:2013 Part 8: Ultrasound
ISO 18437 Mechanical vibration and shock – Characterization of the dynamic mechanical properties of visco-elastic materials
- ISO 18437-1:2012 Part 1: Principles and guidelines
- ISO 18437-2:2005 Part 2: Resonance method
- ISO 18437-3:2005 Part 3: Cantilever shear beam method
- ISO 18437-4:2008 Part 4: Dynamic stiffness method
- ISO 18437-5:2011 Part 5: Poisson ratio based on comparison between measurements and finite element analysis
ISO/IEC 18450:2013 Information technology - Telecommunications and information exchange between systems - Web Services Description Language (WSDL) for CSTA Phase III
ISO 18451 Pigments, dyestuffs and extenders – Terminology
- ISO 18451-1:2015 Part 1: General terms
ISO 18457:2016 Biomimetics – Biomimetic materials, structures and components
ISO 18458:2015 Biomimetics – Terminology, concepts and methodology
ISO 18459:2015 Biomimetics – Biomimetic structural optimization
ISO 18461:2016 International museum statistics
ISO 18465:2017 Microbiology of the food chain - Quantitative determination of emetic toxin (cereulide) using LC-MS/MS
ISO/IEC 18477 Information technology - Scalable compression and coding of continuous-tone still images
- ISO/IEC 18477-1:2015 Part 1: Scalable compression and coding of continuous-tone still images
- ISO/IEC 18477-2:2016 Part 2: Coding of high dynamic range images
- ISO/IEC 18477-3:2015 Part 3: Box file format
- ISO/IEC 18477-6:2016 Part 6: IDR Integer Coding
- ISO/IEC 18477-7:2017 Part 7: HDR Floating-Point Coding
- ISO/IEC 18477-8:2016 Part 8: Lossless and near-lossless coding
- ISO/IEC 18477-9:2016 Part 9: Alpha channel coding
ISO 18490:2015 Non-destructive testing – Evaluation of vision acuity of NDT personnel
ISO 18495 Intelligent transport systems – Commercial freight – Automotive visibility in the distribution supply chain
- ISO 18495-1:2016 Part 1: Architecture and data definitions
ISO/IEC TS 18508:2015 Information technology - Additional Parallel Features in Fortran
ISO 18513:2003 Tourism services - Hotels and other types of tourism accommodation - Terminology
ISO/TR 18529:2000 Ergonomics – Ergonomics of human-system interaction – Human-centred lifecycle process descriptions
ISO/TS 18530:2014 Health Informatics – Automatic identification and data capture marking and labelling – Subject of care and individual provider identification
ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization
ISO 18541 Road vehicles – Standardized access to automotive repair and maintenance information (RMI)
ISO 18542 Road vehicles – Standardized repair and maintenance information (RMI) terminology
- ISO 18542-1:2012 Part 1: General information and use case definition
- ISO 18542-2:2014 Part 2: Standardized process implementation requirements, Registration Authority
ISO 18562 Biocompatibility evaluation of breathing gas pathways in healthcare applications
- ISO 18562-1:2017 Part 1: Evaluation and testing within a risk management process
- ISO 18562-2:2017 Part 2: Tests for emissions of particulate matter
- ISO 18562-3:2017 Part 3: Tests for emissions of volatile organic compounds (VOCs)
- ISO 18562-4:2017 Part 4: Tests for leachables in condensate
ISO 18564:2016 Machinery for forestry – Noise test code
ISO/IEC 18584:2015 Information technology – Identification cards – Conformance test requirements for on-card biometric comparison applications
ISO 18587:2017 Translation services - Post-editing of machine translation output - Requirements
ISO 18589 Measurement of radioactivity in the environment - Soil
- ISO 18589-1:2005 Part 1: General guidelines and definitions
- ISO 18589-2:2015 Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
- ISO 18589-3:2015 Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry
- ISO 18589-4:2009 Part 4: Measurement of plutonium isotopes (plutonium 238 and plutonium 239 + 240) by alpha spectrometry
- ISO 18589-5:2009 Part 5: Measurement of strontium 90
- ISO 18589-6:2009 Part 6: Measurement of gross alpha and gross beta activities
- ISO 18589-7:2013 Part 7: In situ measurement of gamma-emitting radionuclides
ISO 18593:2004 Microbiology of food and animal feeding stuffs – Horizontal methods for sampling techniques from surfaces using contact plates and swabs
ISO/IEC 18598:2016 Information technology - Automated infrastructure management (AIM) systems - Requirements, data exchange and applications
ISO 18600:2015 Textile machinery and accessories – Web roller cards – Terms and definitions
ISO 18601:2013 Packaging and the environment - General requirements for the use of ISO standards in the field of packaging and the environment
ISO 18602:2013 Packaging and the environment—Optimization of the packaging system
ISO 18603:2013 Packaging and the environment—Reuse
ISO 18604:2013 Packaging and the environment—Material recycling
ISO 18605:2013 Packaging and the environment—Energy recovery
ISO 18606:2013 Packaging and the environment—Organic recycling
ISO/TS 18614:2016 Packaging - Label material - Required information for ordering and specifying self-adhesive labels
ISO 18619:2015 Image technology colour management - Black point compensation
ISO 18626:2017 Information and documentation - Interlibrary Loan Transactions
ISO 18629 Industrial automation systems and integration – Process specification language
ISO/TR 18637:2016 Nanotechnologies – Overview of available frameworks for the development of occupational exposure limits and bands for nano-objects and their aggregates and agglomerates (NOAAs)
ISO/TR 18638:2017 Health informatics – Guidance on health information privacy education in healthcare organizations
ISO 18649:2004 Mechanical vibration – Evaluation of measurement results from dynamic tests and investigations on bridges
ISO 18650 Building construction machinery and equipment – Concrete mixers
- ISO 18650-1:2004 Part 1: Vocabulary and general specifications
ISO/IEC TS 18661 Information technology - Programming languages, their environments, and system software interfaces - Floating-point extensions for C
- ISO/IEC TS 18661-1:2014 Part 1: Binary floating-point arithmetic
- ISO/IEC TS 18661-2:2015 Part 2: Decimal floating-point arithmetic
- ISO/IEC TS 18661-3:2015 Part 3: Interchange and extended types
- ISO/IEC TS 18661-4:2015 Part 4: Supplementary functions
- ISO/IEC TS 18661-5:2016 Part 5: Supplementary attributes
ISO 18662 Traditional Chinese medicine - Vocabulary
- ISO 18662-1:2017 Part 1: Chinese Materia Medica
ISO 18665:2015 Traditional Chinese medicine – Herbal decoction apparatus
ISO 18666:2015 Traditional Chinese medicine – General requirements of moxibustion devices
ISO 18682:2016 Intelligent transport systems – External hazard detection and notification systems – Basic requirements
ISO 18739:2016 Dentistry - Vocabulary of process chain for CAD/CAM systems
ISO 18743:2015 Microbiology of the food chain – Detection of Trichinella larvae in meat by artificial digestion method
ISO 18744:2016 Microbiology of the food chain – Detection and enumeration of Cryptosporidium and Giardia in fresh leafy green vegetables and berry fruits
ISO/IEC 18745 Information technology – Test methods for machine readable travel documents (MRTD) and associated devices
- ISO/IEC 18745-1:2014 Part 1: Physical test methods for passport books (durability)
- ISO/IEC 18745-2:2016 Part 2: Test methods for the contactless interface
ISO 18746:2016 Traditional Chinese medicine – Sterile intradermal acupuncture needles for single use
ISO/TS 18750:2015 Intelligent transport systems – Cooperative systems – Definition of a global concept for Local Dynamic Maps
ISO/PAS 18761:2013 Use and handling of medical devices covered by the scope of ISO/TC 84 – Risk assessment on mucocutaneous blood exposure
ISO 18774:2015 Securities and related financial instruments – Financial Instrument Short Name (FISN)
ISO 18775:2008 Veneers – Terms and definitions, determination of physical characteristics and tolerances
ISO 18777:2005 Transportable liquid oxygen systems for medical use – Particular requirements
ISO 18778:2005 Respiratory equipment – Infant monitors – Particular requirements
ISO 18788:2015 Management system for private security operations – Requirements with guidance for use
ISO/TS 18790 Health informatics – Profiling framework and classification for Traditional Medicine informatics standards development
- ISO/TS 18790-1:2015 Part 1: Traditional Chinese Medicine
ISO/IEC 18809:2000 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording AIT-1 with MIC format
ISO/IEC 18810:2001 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording AIT-2 with MIC format
ISO 18812:2003 Health informatics – Clinical analyser interfaces to laboratory information systems – Use profiles
ISO/IEC TS 18822:2015 Programming languages - C++ - File System Technical Specification
ISO/TS 18827:2017 Nanotechnologies – Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
ISO 18829:2017 Document management - Assessing ECM/EDRM implementations - Trustworthiness
ISO 18831:2016 Clothing – Digital fittings – Attributes of virtual garments
ISO 18835:2015 Inhalational anaesthesia systems – Draw-over anaesthetic systems
ISO/IEC 18836:2001 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording – MammothTape-2 format
ISO/TR 18845:2017 Dentistry - Test methods for machining accuracy of computer-aided milling machines
ISO/TS 18867:2015 Microbiology of the food chain – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis
ISO 18875:2015 Coalbed methane exploration and development – Terms and definitions
ISO/TS 18876 Industrial automation systems and integration - Integration of industrial data for exchange, access and sharing
- ISO/TS 18876-1:2003 Part 1: Architecture overview and description
- ISO/TS 18876-2:2003 Part 2: Integration and mapping methodology
ISO 18878:2013 Mobile elevating work platforms – Operator (driver) training
ISO/IEC/IEEE 18880:2015 Information technology – Ubiquitous green community control network protocol
ISO/IEC/IEEE 18881:2016 Information technology – Ubiquitous green community control network – Control and management
ISO/IEC/IEEE 18882:2017 Information technology – Telecommunications and information exchange between systems – Ubiquitous green community control network: Heterogeneous networks convergence and scalability
ISO/IEC/IEEE 18883:2016 Information technology – Ubiquitous green community control network – Security
ISO 18913:2012 Imaging materials - Permanence - Vocabulary
ISO 18921:2008 Imaging materials - Compact discs (CD-ROM) - Method for estimating the life expectancy based on the effects of temperature and relative humidity
ISO 18925:2013 Imaging materials - Optical disc media - Storage practices
ISO 18926:2012 Imaging materials - Information stored on magneto-optical (MO) discs - Method for estimating the life expectancy based on the effects of temperature and relative humidity
ISO 18927:2013 Imaging materials - Recordable compact disc systems - Method for estimating the life expectancy based on the effects of temperature and relative humidity
ISO 18933:2012 Imaging materials – Magnetic tape – Care and handling practices for extended usage
ISO 18938:2014 Imaging materials - Optical discs - Care and handling for extended storage

ISO 19000 – ISO 19999

ISO 19001:2013 In vitro diagnostic medical devices – Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
ISO 19005 Document management – Electronic document file format for long-term preservation
ISO/TS 19006:2016 Nanotechnologies – 5-(and 6)-Chloromethyl-2’,7’ Dichloro-dihydrofluorescein diacetate (CM-H2DCF-DA) assay for evaluating nanoparticle-induced intracellular reactive oxygen species (ROS) production in RAW 264.7 macrophage cell line
ISO 19011:2011 Guidelines for auditing management systems
ISO 19017:2015 Guidance for gamma spectrometry measurement of radioactive waste
ISO 19018:2004 Ships and marine technology - Terms, abbreviations, graphical symbols and concepts on navigation
ISO 19019:2005 Sea-going vessels and marine technology - Instructions for planning, carrying out and reporting sea trials
ISO 19020:2017 Microbiology of the food chain – Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs
ISO/TR 19024:2016 Evaluation of CPB devices relative to their capabilities of reducing the transmission of gaseous microemboli (GME) to a patient during cardiopulmonary bypass
ISO 19028:2016 Accessible design - Information contents, figuration and display methods of tactile guide maps
ISO/TS 19036:2006 Microbiology of food and animal feeding stuffs – Guidelines for the estimation of measurement uncertainty for quantitative determinations
ISO/TR 19038:2005 Banking and related financial services – Triple DEA – Modes of operation – Implementation guidelines
ISO 19045:2015 Ophthalmic optics – Contact lens care products – Method for evaluating Acanthamoeba encystment by contact lens care products
ISO 19054:2005 Rail systems for supporting medical equipment
ISO/TR 19057:2017 Nanotechnologies – Use and application of acellular in vitro tests and methodologies to assess nanomaterial biodurability
ISO/IEC 19058:2001 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Generic functional protocol
ISO/IEC TR 19075 Information technology - Database languages - SQL Technical Reports
- ISO/IEC TR 19075-1:2011 Part 1: XQuery Regular Expression Support in SQL
- ISO/IEC TR 19075-2:2015 Part 2: SQL Support for Time-Related Information
- ISO/IEC TR 19075-3:2015 Part 3: SQL Embedded in Programs using the JavaTM programming language
- ISO/IEC TR 19075-4:2015 Part 4: SQL with Routines and types using the JavaTM programming language
- ISO/IEC TR 19075-5:2016 Part 5: Row Pattern Recognition in SQL
- ISO/IEC TR 19075-6:2017 Part 6: SQL support for JavaScript Object Notation (JSON)
- ISO/IEC TR 19075-7:2017 Part 7: Polymorphic table functions in SQL
ISO 19079:2016 Intelligent transport systems – Communications access for land mobiles (CALM) – 6LoWPAN networking
ISO 19080:2016 Intelligent transport systems – Communications access for land mobiles (CALM) – CoAP facility
ISO/TR 19083 Intelligent transport systems – Emergency evacuation and disaster response and recovery
- ISO/TR 19083-1:2016 Part 1: Framework and concept of operation
ISO/IEC 19086 Information technology - Cloud computing - Service level agreement (SLA) framework
- ISO/IEC 19086-1:2016 Part 1: Overview and concepts
- ISO/IEC 19086-3:2017 Part 3: Core conformance requirements
ISO/TS 19091:2017 Intelligent transport systems – Cooperative ITS – Using V2I and I2V communications for applications related to signalized intersections
ISO 19092:2008 Financial services – Biometrics – Security framework
ISO/IEC 19099:2014 Information technology - Virtualization Management Specification
ISO 19101 Geographic information – Reference model
- ISO 19101-1:2014 Part 1: Fundamentals
- ISO/TS 19101-2:2008 Part 2: Imagery
ISO/TS 19103:2015 Geographic information – Conceptual schema language
ISO/TS 19104:2016 Geographic information – Terminology
ISO 19105:2000 Geographic information – Conformance and testing
ISO 19106:2004 Geographic information – Profiles
ISO 19107:2003 Geographic information – Spatial schema
ISO 19108:2002 Geographic information – Temporal schema
ISO 19109:2015 Geographic information – Rules for application schema
ISO 19110:2016 Geographic information – Methodology for feature cataloguing
ISO 19111:2007 Geographic information – Spatial referencing by coordinates
- ISO 19111-2:2009 Part 2: Extension for parametric values
ISO 19112:2003 Geographic information – Spatial referencing by geographic identifiers
ISO 19113:2002 Geographic information – Quality principles [Withdrawn: replaced by ISO 19157:2013]
ISO 19114:2003 Geographic information – Quality evaluation procedures [Withdrawn: replaced by ISO 19157:2013]
ISO 19115 Geographic information – Metadata
- ISO 19115-1:2014 Part 1: Fundamentals
- ISO 19115-2:2009 Part 2: Extensions for imagery and gridded data
- ISO/TS 19115-3:2016 Part 3: XML schema implementation for fundamental concepts
ISO 19116:2004 Geographic information – Positioning services
ISO 19117:2012 Geographic information – Portrayal
ISO 19118:2011 Geographic information – Encoding
ISO 19119:2016 Geographic information – Services
ISO/TR 19120:2001 Geographic information – Functional standards
ISO/TR 19121:2000 Geographic information – Imagery and gridded data
ISO/TR 19122:2004 Geographic information / Geomatics – Qualification and certification of personnel
ISO 19123:2005 Geographic information – Schema for coverage geometry and functions
ISO 19125 Geographic information – Simple feature access
ISO 19126:2009 Geographic information – Feature concept dictionaries and registers
ISO/TS 19127:2005 Geographic information – Geodetic codes and parameters
ISO 19128:2005 Geographic information – Web map server interface
ISO/TS 19129:2009 Geographic information – Imagery, gridded and coverage data framework
ISO/TS 19130:2010 Geographic information – Imagery sensor models for geopositioning
- ISO/TS 19130-2:2014 Part 2: SAR, InSAR, lidar and sonar
ISO 19131:2007 Geographic information – Data product specifications
ISO 19132:2007 Geographic information – Location-based services – Reference model
ISO 19133:2005 Geographic information – Location-based services – Tracking and navigation
ISO 19134:2007 Geographic information – Location-based services – Multimodal routing and navigation
ISO 19135 Geographic information – Procedures for item registration
- ISO 19135-1:2015 Part 1: Fundamentals
- ISO/TS 19135-2:2012 Part 2: XML schema implementation
ISO 19136:2007 Geographic information – Geography Markup Language (GML)
- ISO 19136-2:2015 Part 2: Extended schemas and encoding rules
ISO 19137:2007 Geographic information – Core profile of the spatial schema
ISO/TS 19138:2006 Geographic information – Data quality measures [Withdrawn: replaced by ISO 19157:2013]
ISO/TS 19139:2007 Geographic information – Metadata – XML schema implementation
- ISO/TS 19139-2:2012 Part 2: Extensions for imagery and gridded data
ISO 19141:2008 Geographic information – Schema for moving features
ISO 19142:2010 Geographic information – Web Feature Service
ISO 19143:2010 Geographic information – Filter encoding
ISO 19144 Geographic information – Classification systems
- ISO 19144-1:2009 Part 1: Classification system structure
- ISO 19144-2:2012 Part 2: Land Cover Meta Language (LCML)
ISO 19145:2013 Geographic information – Registry of representations of geographic point location
ISO 19146:2010 Geographic information – Cross-domain vocabularies
ISO 19147:2015 Geographic information – Transfer Nodes
ISO 19148:2012 Geographic information – Linear referencing
ISO 19149:2011 Geographic information – Rights expression language for geographic information - GeoREL
ISO 19150 Geographic information – Ontology
- ISO/TS 19150-1:2012 Part 1: Framework
- ISO 19150-2:2015 Part 2: Rules for developing ontologies in the Web Ontology Language (OWL)
ISO 19152:2012 Geographic information – Land Administration Domain Model (LADM)
ISO 19153:2014 Geospatial Digital Rights Management Reference Model (GeoDRM RM)
ISO 19154:2014 Geographic information – Ubiquitous public access – Reference model
ISO 19155:2012 Geographic information – Place Identifier (PI) architecture
- ISO 19155-2:2017 Part 2: Place Identifier (PI) linking
ISO 19156 Geographic information - Observations and measurements
ISO 19157:2013 Geographic information – Data quality
- ISO/TS 19157-2:2016 Part 2: XML schema implementation
ISO/TS 19158:2012 Geographic information – Quality assurance of data supply
ISO/TS 19159 Geographic information – Calibration and validation of remote sensing imagery sensors and data
- ISO/TS 19159-1:2014 Part 1: Optical sensors
- ISO/TS 19159-2:2016 Part 2: Lidar
ISO 19160 Addressing
- ISO 19160-1:2015 Part 1: Conceptual model
ISO 19162:2015 Geographic information – Well-known text representation of coordinate reference systems
ISO/TS 19163 Geographic information – Content components and encoding rules for imagery and gridded data
- ISO/TS 19163-1:2016 Part 1: Content model
ISO/TR 19201:2013 Mechanical vibration – Methodology for selecting appropriate machinery vibration standards
ISO 19204:2017 Soil quality - Procedure for site-specific ecological risk assessment of soil contamination (soil quality TRIAD approach)
ISO 19213:2017 Implants for surgery – Test methods of material for use as a cortical bone model
ISO/IEC TS 19217:2015 Information technology - Programming languages - C++ Extensions for concepts
ISO/TS 19218 Medical devices – Hierarchical coding structure for adverse events
- ISO/TS 19218-1:2011 Part 1: Event-type codes
- ISO/TS 19218-2:2012 Part 2: Evaluation codes
ISO/TR 19231:2014 Health informatics – Survey of mHealth projects in low and middle income countries (LMIC)
ISO 19233 Implants for surgery – Orthopaedic joint prosthesis
- ISO 19233-1:2017 Part 1: Procedure for producing parametric 3D bone models from CT data of the knee
ISO/TR 19234:2016 Hydrometry – Low cost baffle solution to aid fish passage at triangular profile weirs that conform to ISO 4360
ISO 19238:2014 Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics
ISO/TR 19244:2014 Guidance on transition periods for standards developed by ISO/TC 84 – Devices for administration of medicinal products and catheters
ISO 19250:2010 Water quality – Detection of Salmonella spp.
ISO/TS 19256:2016 Health informatics – Requirements for medicinal product dictionary systems for health care
ISO 19262:2015 Photography - Archiving Systems - Vocabulary
ISO/TR 19263 Photography - Archiving systems
- ISO/TR 19263-1:2017 Part 1: Best practices for digital image capture of cultural heritage material
ISO/TS 19264 Photography - Archiving systems - Image quality analysis
- ISO/TS 19264-1:2017 Part 1: Reflective originals
ISO 19289:2015 Air quality – Meteorology – Siting classifications for surface observing stations on land
ISO/TS 19299:2015 Electronic fee collection – Security framework
ISO/TR 19300:2015 Graphic technology – Guidelines for the use of standards for print media production
ISO/TS 19321:2015 Intelligent transport systems – Cooperative ITS – Dictionary of in-vehicle information (IVI) data structures
ISO/TS 19337:2016 Nanotechnologies – Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity
ISO 19343:2017 Microbiology of the food chain – Detection and quantification of histamine in fish and fishery products – HPLC method
ISO 19361:2017 Measurement of radioactivity - Determination of beta emitters activities - Test method using liquid scintillation counting
ISO/IEC 19369:2014 Information technology – Telecommunications and information exchange between systems – NFCIP-2 test methods
ISO/IEC 19395:2015 Information technology - Sustainability for and by information technology - Smart data centre resource monitoring and control
ISO 19403 Paints and varnishes – Wettability
- ISO 19403-1:2017 Part 1: Terminology and general principles
- ISO 19403-2:2017 Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle
- ISO 19403-3:2017 Part 3: Determination of the surface tension of liquids using the pendant drop method
- ISO 19403-4:2017 Part 4: Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension
- ISO 19403-5:2017 Part 5: Determination of the polar and dispersive fractions of the surface tension of liquids from contact angles measurements on a solid with only a disperse contribution to its surface energy
- ISO 19403-6:2017 Part 6: Measurement of dynamic contact angle
- ISO 19403-7:2017 Part 7: Measurement of the contact angle on a tilt stage (roll-off angle)
ISO/TS 19408:2015 Footwear – Sizing – Vocabulary and terminology
ISO 19439 Enterprise integration – Framework for enterprise modelling
ISO 19440 Enterprise integration – Constructs for enterprise modelling
ISO 19444 Document management - XML Forms Data Format
- ISO 19444-1:2016 Part 1: Use of ISO 32000-2 (XFDF 3.0)
ISO 19445:2016 Graphic technology - Metadata for graphic arts workflow - XMP metadata for image and document proofing
ISO/IEC TR 19446:2015 Differences between the driving licences based on the ISO/IEC 18013 series and the European Union specifications
ISO/IEC 19459:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Single Step Call Transfer Supplementary Service
ISO/IEC 19460:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Single Step Call Transfer supplementary service
ISO/IEC 19464:2014 Information technology – Advanced Message Queuing Protocol (AMQP) v1.0 specification
ISO 19465:2017 Traditional Chinese medicine - Categories of traditional Chinese medicine (TCM) clinical terminological systems
ISO 19467:2017 Thermal performance of windows and doors - Determination of solar heat gain coefficient using solar simulator
ISO/CIE 19476:2014 Characterization of the performance of illuminance meters and luminance meters
ISO/TR 19480:2005 Polyethylene pipes and fittings for the supply of gaseous fuels or water – Training and assessment of fusion operators
ISO 19496 Vitreous and porcelain enamels - Terminology
- ISO 19496-1:2017 Part 1: Terms and definitions
- ISO 19496-2:2017 Part 2: Visual representations and descriptions
ISO/TR 19498:2015 Ophthalmic optics and instruments – Correlation of optotypes
ISO/IEC 19500 Information technology - Object Management Group - Common Object Request Broker Architecture (CORBA)
- ISO/IEC 19500-1:2012 Part 1: Interfaces
- ISO/IEC 19500-2:2012 Part 2: Interoperability
- ISO/IEC 19500-3:2012 Part 3: Components
ISO/IEC 19501 Information technology – Open Distributed Processing – Unified Modeling Language (UML) Version 1.4.2
ISO/IEC 19502 Information technology – Meta Object Facility (MOF)
ISO/IEC 19503 Information technology – XML Metadata Interchange (XMI)
ISO/IEC 19505 Information technology - Object Management Group Unified Modeling Language (OMG UML)
- ISO/IEC 19505-1:2012 Part 1: Infrastructure
- ISO/IEC 19505-2:2012 Part 2: Superstructure
ISO/IEC 19506:2012 Information technology—Object Management Group Architecture-Driven Modernization (ADM) - Knowledge Discovery Meta-Model (KDM)
ISO/IEC 19507:2012 Information technology - Object Management Group Object Constraint Language (OCL)
ISO/IEC 19508:2014 Information technology - Object Management Group Meta Object Facility (MOF) Core
ISO/IEC 19509:2014 Information technology - Object Management Group XML Metadata Interchange (XMI)
ISO/IEC 19510:2013 Information technology - Object Management Group Business Process Model and Notation
ISO/IEC 19514:2017 Information technology - Object management group systems modeling language (OMG SysML)
ISO/IEC TR 19566 Information technology - JPEG Systems
- ISO/IEC TR 19566-1:2016 Part 1: Packaging of information using codestreams and file formats
- ISO/IEC TR 19566-2:2016 Part 2: Transport mechanisms and packaging
ISO/IEC TS 19568:2017 Programming Languages - C++ Extensions for Library Fundamentals
ISO/IEC TS 19570:2015 Programming Languages - Technical Specification for C++ Extensions for Parallelism
ISO/IEC TS 19571:2016 Programming Languages - Technical specification for C++ extensions for concurrency
ISO/TS 19590:2017 Nanotechnologies – Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
ISO/IEC 19592 Information technology - Security techniques - Secret sharing
- ISO/IEC 19592-1:2016 Part 1: General
ISO 19600 Compliance management systems - Guidelines
ISO/TR 19601:2017 Nanotechnologies – Aerosol generation for air exposure studies of nano-objects and their aggregates and agglomerates (NOAA)
ISO 19611:2017 Traditional Chinese medicine – Air extraction cupping device
ISO 19614:2017 Traditional Chinese medicine – Pulse graph force transducer
ISO/IEC 19637:2016 Information technology – Sensor network testing framework
ISO/TR 19639:2015 Electronic fee collection – Investigation of EFC standards for common payment schemes for multi-modal transport services
ISO 19649:2017 Mobile robots - Vocabulary
ISO/TR 19664:2017 Human response to vibration – Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety
ISO/IEC 19678:2015 Information Technology - BIOS Protection Guidelines
ISO 19709 Transport packaging - Small load container systems
- ISO 19709-1:2016 Part 1: Common requirements and test methods
- ISO/TS 19709-2:2016 Part 2: Column Stackable System (CSS)
- ISO/TS 19709-3:2016 Part 3: Bond Stackable System (BSS)
ISO/TR 19716:2016 Nanotechnologies – Characterization of cellulose nanocrystals
ISO 19719:2010 Machine tools - Work holding chucks - Vocabulary
ISO 19720 Building construction machinery and equipment – Plants for the preparation of concrete and mortar
- ISO 19720-1:2017 Part 1: Terminology and commercial specifications
ISO/TR 19727:2017 Medical devices – Pump tube spallation test – General procedure
ISO 19731:2017 Digital analytics and web analyses for purposes of market, opinion and social research - Vocabulary and service requirements
ISO/IEC 19752 Information technology – Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components
ISO/IEC TR 19755:2003 Information technology - Programming languages, their environments and system software interfaces - Object finalization for programming language COBOL
ISO/IEC 19756:2011 Information technology - Topic Maps - Constraint Language (TMCL)
ISO/IEC 19757 Information technology – Document Schema Definition Languages (DSDL)
- ISO/IEC 19757-2:2008 Part 2: Regular-grammar-based validation – RELAX NG
- ISO/IEC 19757-3:2016 Part 3: Rule-based validation – Schematron
- ISO/IEC 19757-4:2006 Part 4: Namespace-based Validation Dispatching Language (NVDL)
- ISO/IEC 19757-5:2011 Part 5: Extensible Datatypes
- ISO/IEC 19757-7:2009 Part 7: Character Repertoire Description Language (CREPDL)
- ISO/IEC 19757-8:2008 Part 8: Document Semantics Renaming Language (DSRL)
- ISO/IEC 19757-11:2011 Part 11: Schema association
ISO/IEC TR 19758:2003 Information technology - Document description and processing languages - DSSSL library for complex compositions
ISO/IEC TR 19759:2015 Software Engineering - Guide to the software engineering body of knowledge (SWEBOK)
ISO/IEC 19761:2011 Software engineering - COSMIC: a functional size measurement method
ISO/IEC 19762:2016 Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary
ISO/IEC 19763 Information technology - Metamodel framework for interoperability (MFI)
- ISO/IEC 19763-1:2015 Part 1: Framework
- ISO/IEC 19763-3:2010 Part 3: Metamodel for ontology registration
- ISO/IEC 19763-5:2015 Part 5: Metamodel for process model registration
- ISO/IEC 19763-6:2015 Part 6: Registry Summary
- ISO/IEC 19763-7:2015 Part 7: Metamodel for service model registration
- ISO/IEC 19763-8:2015 Part 8: Metamodel for role and goal model registration
- ISO/IEC TR 19763-9:2015 Part 9: On demand model selection
- ISO/IEC 19763-10:2014 Part 10: Core model and basic mapping
- ISO/IEC 19763-12:2015 Part 12: Metamodel for information model registration
- ISO/IEC TS 19763-13:2016 Part 13: Metamodel for form design registration
ISO/IEC TR 19764:2005 Information technology – Guidelines, methodology and reference criteria for cultural and linguistic adaptability in information technology products
ISO/IEC TR 19768:2007 Information technology - Programming languages - Technical Report on C++ Library Extensions
ISO/IEC 19770 Information technology – Software asset management
ISO/IEC 19772:2009 Information technology - Security techniques - Authenticated encryption
ISO/IEC 19773:2011 Information technology - Metadata Registries (MDR) modules
ISO/IEC 19774:2006 Information technology - Computer graphics and image processing - Humanoid Animation (H-Anim)
ISO/IEC 19775 Information technology—Computer graphics, image processing and environmental data representation—Extensible 3D (X3D)
- ISO/IEC 19775-1:2013 Part 1: Architecture and base components
- ISO/IEC 19775-2:2015 Part 2: Scene access interface (SAI)
ISO/IEC 19776 Information technology - Computer graphics, image processing and environmental data representation - Extensible 3D (X3D) encodings
- ISO/IEC 19776-1:2015 Part 1: Extensible Markup Language (XML) encoding
- ISO/IEC 19776-2:2015 Part 2: Classic VRML encoding
- ISO/IEC 19776-3:2015 Part 3: Compressed binary encoding
ISO/IEC 19777 Information technology - Computer graphics and image processing - Extensible 3D (X3D) language bindings
- ISO/IEC 19777-1:2006 Part 1: ECMAScript
- ISO/IEC 19777-2:2006 Part 2: Java
ISO/IEC 19778 Information technology - Learning, education and training - Collaborative technology - Collaborative workplace
- ISO/IEC 19778-1:2015 Part 1: Collaborative workplace data model
- ISO/IEC 19778-2:2015 Part 2: Collaborative environment data model
- ISO/IEC 19778-3:2015 Part 3: Collaborative group data model
ISO/IEC 19780 Information technology - Learning, education and training - Collaborative technology - Collaborative learning communication
- ISO/IEC 19780-1:2015 Part 1: Text-based communication
ISO/IEC TR 19782:2006 Information technology - Automatic identification and data capture techniques - Effects of gloss and low substrate opacity on reading of bar code symbols
ISO/IEC 19784 Information technology – Biometric application programming interface
- ISO/IEC 19784-1:2006 Part 1: BioAPI specification
- ISO/IEC 19784-2:2007 Part 2: Biometric archive function provider interface
- ISO/IEC 19784-4:2011 Part 4: Biometric sensor function provider interface
ISO/IEC 19785 Information technology – Common Biometric Exchange Formats Framework
- ISO/IEC 19785-1:2015 Part 1: Data element specification
- ISO/IEC 19785-2:2006 Part 2: Procedures for the operation of the Biometric Registration Authority
- ISO/IEC 19785-3:2015 Part 3: Patron format specifications
- ISO/IEC 19785-4:2010 Part 4: Security block format specifications
ISO/IEC 19788 Information technology – Learning, education and training – Metadata for learning resources
ISO/IEC 19790:2012 Information technology – Security techniques – Security requirements for cryptographic modules
ISO/IEC TR 19791:2010 Information technology - Security techniques - Security assessment of operational systems
ISO/IEC 19792:2009 Information technology - Security techniques - Security evaluation of biometrics
ISO/IEC 19793 Information technology - Open Distributed Processing—Use of UML for ODP system specifications
ISO/IEC 19794 Information technology – Biometric data interchange formats
- ISO/IEC 19794-1:2011 Part 1: Framework
- ISO/IEC 19794-2:2011 Part 2: Finger minutiae data
- ISO/IEC 19794-3:2006 Part 3: Finger pattern spectral data
- ISO/IEC 19794-4:2011 Part 4: Finger image data
- ISO/IEC 19794-5:2011 Part 5: Face image data
- ISO/IEC 19794-6:2011 Part 6: Iris image data
- ISO/IEC 19794-7:2014 Part 7: Signature/sign time series data
- ISO/IEC 19794-8:2011 Part 8: Finger pattern skeletal data
- ISO/IEC 19794-9:2011 Part 9: Vascular image data
- ISO/IEC 19794-10:2007 Part 10: Hand geometry silhouette data
- ISO/IEC 19794-11:2013 Part 11: Signature/sign processed dynamic data
- ISO/IEC 19794-14:2013 Part 14: DNA data
- ISO/IEC 19794-15:2017 Part 15: Palm crease image data
ISO/IEC 19795 Information technology – Biometric performance testing and reporting
- ISO/IEC 19795-1:2006 Part 1: Principles and framework
- ISO/IEC 19795-2:2007 Part 2: Testing methodologies for technology and scenario evaluation
- ISO/IEC TR 19795-3:2007 Part 3: Modality-specific testing
- ISO/IEC 19795-4:2008 Part 4: Interoperability performance testing
- ISO/IEC 19795-5:2011 Part 5: Access control scenario and grading scheme
- ISO/IEC 19795-6:2012 Part 6: Testing methodologies for operational evaluation
- ISO/IEC 19795-7:2011 Part 7: Testing of on-card biometric comparison algorithms
ISO/IEC 19796 Information technology - Learning, education and training - Quality management, assurance and metrics
- ISO/IEC 19796-1:2005 Part 1: General approach
- ISO/IEC 19796-3:2009 Part 3: Reference methods and metrics
ISO/TR 19814:2017 Information and documentation - Collections management for archives and libraries
ISO/IEC 19831:2015 Cloud Infrastructure Management Interface (CIMI) Model and RESTful HTTP-based Protocol – An Interface for Managing Cloud Infrastructure
ISO/TR 19838:2016 Microbiology – Cosmetics – Guidelines for the application of ISO standards on Cosmetic Microbiology
ISO/IEC TS 19841:2015 Technical Specification for C++ Extensions for Transactional Memory
ISO/TS 19844:2016 Health informatics – Identification of medicinal products – Implementation guidelines for data elements and structures for the unique identification and exchange of regulated information on substances
ISO/IEC 19845:2015 Information technology - Universal business language version 2.1 (UBL v2.1)
ISO 19859:2016 Gas turbine applications – Requirements for power generation
ISO 19891 Ships and marine technology - Specifications for gas detectors intended for use on board ships
- ISO 19891-1:2017 Part 1: Portable gas detectors for atmosphere testing of enclosed spaces
ISO/TR 19948:2016 Earth-moving machinery – Conformity assessment and certification process
ISO 19952:2005 Footwear – Vocabulary
ISO/TS 19979:2014 Ophthalmic optics – Contact lenses – Hygienic management of multipatient use trial contact lenses
ISO 19980:2012 Ophthalmic instruments – Corneal topographers
ISO/IEC 19987:2015 Information technology - EPC Information services - Specification
ISO/IEC 19988:2015 Information technology - GS1 Core Business Vocabulary (CBV)
ISO 19993 Timber structures—Glued laminated timber—Face and edge joint cleavage test

ISO 20000 – ISO 20999

ISO/IEC 20000 Information technology – Service management
ISO/IEC TR 20002:2012 Information technology – Telecommunications and information exchange between systems – Managed P2P: Framework
ISO/IEC TR 20004:2015 Information technology - Security techniques - Refining software vulnerability analysis under ISO/IEC 15408 and ISO/IEC 18045
ISO/IEC 20005:2013 Information technology - Sensor networks - Services and interfaces supporting collaborative information processing in intelligent sensor networks
ISO/IEC 20006 Information technology for learning, education and training - Information model for competency
- ISO/IEC 20006-1:2014 Part 1: Competency general framework and information model
- ISO/IEC 20006-2:2015 Part 2: Proficiency level information model
ISO/IEC TR 20007:2014 Information technology - Cultural and linguistic interoperability - Definitions and relationship between symbols, icons, animated icons, pictograms, characters and glyphs
ISO/IEC 20008 Information technology - Security techniques - Anonymous digital signatures
- ISO/IEC 20008-1:2013 Part 1: General
- ISO/IEC 20008-2:2013 Part 2: Mechanisms using a group public key
ISO/IEC 20009 Information technology - Security techniques - Anonymous entity authentication
- ISO/IEC 20009-1:2013 Part 1: General
- ISO/IEC 20009-2:2013 Part 2: Mechanisms based on signatures using a group public key
- ISO/IEC 20009-4:2017 Part 4: Mechanisms based on weak secrets
ISO/IEC TS 20013:2015 Information technology for learning, education and training - A reference framework of e-Portfolio information
ISO/IEC 20016 Information technology for learning, education and training - Language accessibility and human interface equivalencies (HIEs) in e-learning applications
- ISO/IEC 20016-1:2014 Part 1: Framework and reference model for semantic interoperability
ISO/IEC TR 20017:2011 Information technology - Radio frequency identification for item management - Electromagnetic interference impact of ISO/IEC 18000 interrogator emitters on implantable pacemakers and implantable cardioverter defibrillators
ISO 20022 Financial services – UNIversal Financial Industry message scheme
ISO/TS 20026:2017 Intelligent transport systems – Cooperative ITS – Test architecture
ISO/IEC TS 20027:2015 Biometrics interoperability profiles – Best practices for slap tenprint captures
ISO/IEC 20060:2010 Information technology – Open Terminal Architecture (OTA) – Virtual machine
ISO/IEC 20061:2001 Information technology – 12,65 mm wide magnetic tape cassette for information interchange – Helical scan recording – DTF-2
ISO/IEC 20062:2001 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording – VXA-1 format
ISO/PAS 20065:2016 Acoustics – Objective method for assessing the audibility of tones in noise – Engineering method
ISO/IEC TS 20071 Information technology – User interface component accessibility
- ISO/IEC TS 20071-11:2012 Part 11: Guidance for alternative text for images
- ISO/IEC TS 20071-21:2015 Part 21: Guidance on audio descriptions
- ISO/IEC TS 20071-25:2017 Part 25: Guidance on the audio presentation of text in videos, including captions, subtitles and other on-screen text
ISO 20072:2009 Aerosol drug delivery device design verification—Requirements and test methods
ISO/IEC 20113:2004 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Make call request supplementary service
ISO/IEC 20114:2004 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network (PISN) – Inter-exchange signalling protocol – Make call request supplementary service
ISO/IEC 20115:2004 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Use of QSIG for Message Centre Access (MCA) profile standard
ISO/IEC 20116:2004 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Message centre monitoring and mailbox identification supplementary services
ISO/IEC 20117:2004 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Message centre monitoring and mailbox identification supplementary services
ISO 20121:2012 Event sustainability management systems - Requirements with guidance for use
ISO 20128:2006 Milk products – Enumeration of presumptive Lactobacillus acidophilus on a selective medium – Colony-count technique at 37 degrees C
ISO 20155:2017 Ships and marine technology - Test method of flow induced in-pipe noise source characteristics for a ship-used pump
ISO 20160:2006 Implants for surgery – Metallic materials – Classification of microstructures for alpha+beta titanium alloy bars
ISO/IEC 20161:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Use of QSIG at the C reference point between a PINX and an Interconnecting Network
ISO/IEC 20162:2001 Information technology - Data interchange on 300 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 30 Gbytes per cartridge
ISO/IEC 20243:2015 Information Technology - Open Trusted Technology ProviderTM Standard (O-TTPS) - Mitigating maliciously tainted and counterfeit products
ISO 20245:2017 Cross-border trade of second-hand goods
ISO/IEC 20246:2017 Software and systems engineering - Work product reviews
ISO 20252:2012 Market, opinion and social research — Vocabulary and service requirements
ISO 20275:2017 Financial services – Entity legal forms (ELF)
ISO/TR 20278:2015 Unwanted reflections from the active and inactive areas of display surfaces visible during use
ISO/TS 20282 Usability of consumer products and products for public use
ISO 20283 Mechanical vibration - Measurement of vibration on ships
- ISO 20283-2:2008 Part 2: Measurement of structural vibration
- ISO 20283-3:2006 Part 3: Pre-installation vibration measurement of shipboard equipment
- ISO 20283-4:2012 Part 4: Measurement and evaluation of vibration of the ship propulsion machinery
- ISO 20283-5:2016 Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
ISO 20301:2014 Health informatics – Health cards – General characteristics
ISO 20302:2014 Health informatics – Health cards – Numbering system and registration procedure for issuer identifiers
ISO 20308:2017 Traditional Chinese medicine – Gua Sha instruments
ISO 20361:2015 Liquid pumps and pump units – Noise test code – Grades 2 and 3 of accuracy
ISO 20381:2009 Mobile elevating work platforms - Symbols for operator controls and other displays
ISO 20400:2017 Sustainable procurement - Guidance
ISO/TS 20428:2017 Health informatics – Data elements and their metadata for describing structured clinical genomic sequence information in electronic health records
ISO/TS 20440:2016 Health informatics – Identification of medicinal products – Implementation guide for ISO 11239 data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging
ISO/TS 20452:2007 Requirements and Logical Data Model for a Physical Storage Format (PSF) and an Application Program Interface (API) and Logical Data Organization for PSF used in Intelligent Transport Systems (ITS) Database Technology
ISO 20456:2017 Measurement of fluid flow in closed conduits – Guidance for the use of electromagnetic flowmeters for conductive liquids
ISO/TR 20461:2000 Determination of uncertainty for volume measurements made using the gravimetric method
ISO/TS 20477:2017 Nanotechnologies - Standard terms and their definition for cellulose nanomaterial
ISO 20480 Fine bubble technology – General principles for usage and measurement of fine bubbles
- ISO 20480-1:2017 Part 1: Terminology
ISO 20484:2017 Non-destructive testing - Leak testing - Vocabulary
ISO 20498 Traditional Chinese medicine – Computerized tongue image analysis system
- ISO 20498-2:2017 Part 2: Light environment
ISO/TR 20514:2005 Health informatics – Electronic health record – Definition, scope and context
ISO 20519:2017 Ships and marine technology - Specification for bunkering of liquefied natural gas fuelled vessels
ISO/TR 20526:2017 Account-based ticketing state of the art report
ISO/TR 20529 Intelligent transport systems – Framework for green ITS (G-ITS) standards
- ISO/TR 20529-1:2017 Part 1: General information and use case definitions
ISO/TR 20545:2017 Intelligent transport systems – Vehicle/roadway warning and control systems – Report on standardisation for vehicle automated driving systems (RoVAS)/Beyond driver assistance systems
ISO/IEC 20563:2001 Information technology - 80 mm (1,23 Gbytes per side) and 120 mm (3,95 Gbytes per side) DVD-recordable disk (DVD-R)
ISO/TS 20625:2002 Electronic data interchange for administration, commerce and transport (EDIFACT) – Rules for generation of XML scheme files (XSD) on the basis of EDI(FACT) implementation guidelines
ISO/IEC 20648:2016 Information technology - TLS specification for storage systems
ISO 20653 Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access
ISO 20669:2017 Non-destructive testing - Pulsed eddy current testing of ferromagnetic metallic components
ISO 20700 Guidelines for management consultancy services
ISO 20712 Water safety signs and beach safety flags
- ISO 20712-1:2008 Part 1: Specifications for water safety signs used in workplaces and public areas
- ISO 20712-2:2007 Part 2: Specifications for beach safety flags - Colour, shape, meaning and performance
- ISO 20712-3:2014 Part 3: Guidance for use
ISO 20725:2004 Textile machinery – Condensers for cotton spinning – Vocabulary and principles of construction
ISO 20726:2004 Textile machinery – Hopper feeders for cotton spinning – Vocabulary and principles of construction
ISO 20727:2004 Textile machinery – Mixing bale openers for cotton spinning – Vocabulary and principles of construction
ISO/IEC 20741:2017 Systems and software engineering - Guideline for the evaluation and selection of software engineering tools
ISO 20743:2013 Textiles – Determination of antibacterial activity of textile products
ISO/IEC TR 20748 Information technology for learning, education and training - Learning analytics interoperability
- ISO/IEC TR 20748-1:2016 Part 1: Reference model
- ISO/IEC TR 20748-2:2017 Part 2: System requirements
ISO 20775:2009 Information and documentation - Schema for holdings information
ISO 20785 Dosimetry for exposures to cosmic radiation in civilian aircraft
- ISO 20785-1:2012 Part 1: Conceptual basis for measurements
- ISO 20785-2:2011 Part 2: Characterization of instrument response
- ISO 20785-3:2015 Part 3: Measurements at aviation altitudes
ISO/IEC 20802 Information technology – Open data protocol (OData) v4.0
- ISO/IEC 20802-1:2016 Part 1: Core
- ISO/IEC 20802-2:2016 Part 2: OData JSON Format
ISO 20807:2004 Non-destructive testing – Qualification of personnel for limited application of non-destructive testing
ISO/TR 20811:2017 Optics and photonics – Lasers and laser-related equipment – Laser-induced molecular contamination testing
ISO 20815 Petroleum, petrochemical and natural gas industries - Production assurance and reliability management
ISO 20816 Mechanical vibration – Measurement and evaluation of machine vibration
- ISO 20816-1:2016 Part 1: General guidelines
- ISO 20816-2:2017 Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
ISO/TR 20824:2007 Ophthalmic instruments – Background for light hazard specification in ophthalmic instrument standards
ISO/TR 20831:2017 Health informatics – Medication management concepts and definitions
ISO/TS 20836:2005 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Performance testing for thermal cyclers
ISO 20837:2006 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Requirements for sample preparation for qualitative detection
ISO 20838:2006 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Requirements for amplification and detection for qualitative methods
ISO 20906:2009 Acoustics – Unattended monitoring of aircraft sound in the vicinity of airports
ISO/IEC TR 20913:2016 Information technology - Data centres - Guidelines on holistic investigation methodology for data centre key performance indicators
ISO/IEC 20919:2016 Information technology – Linear Tape File System (LTFS) Format Specification
ISO/IEC 20922:2016 Information technology – Message Queuing Telemetry Transport (MQTT) v3.1.1
ISO/IEC 20926:2009 Software and systems engineering - Software measurement - IFPUG functional size measurement method 2009
ISO/IEC 20933:2016 Information technology - Distributed Application Platforms and Services (DAPS) - Access Systems
ISO/IEC TR 20943 Information technology – Procedures for achieving metadata registry content consistency
- ISO/IEC TR 20943-1:2003 Part 1: Data elements
- ISO/IEC TR 20943-3:2004 Part 3: Value domains
- ISO/IEC TR 20943-5:2013 Part 5: Metadata mapping procedure
- ISO/IEC TR 20943-6:2013 Part 6: Framework for generating ontologies
ISO/IEC 20944 Information technology - Metadata Registries Interoperability and Bindings (MDR-IB)
- ISO/IEC 20944-1:2013 Part 1: Framework, common vocabulary, and common provisions for conformance
- ISO/IEC 20944-2:2013 Part 2: Coding bindings
- ISO/IEC 20944-3:2013 Part 3: API bindings
- ISO/IEC 20944-4:2013 Part 4: Protocol bindings
- ISO/IEC 20944-5:2013 Part 5: Profiles
ISO 20958:2013 Condition monitoring and diagnostics of machine systems – Electrical signature analysis of three-phase induction motors
ISO/IEC 20968:2002 Software engineering - Mk II Function Point Analysis - Counting Practices Manual
ISO/IEC 20970:2002 Information technology - Programming languages, their environments and system software interfaces - JEFF file format

ISO 21000 – ISO 21999

ISO/IEC 21000 Information technology – Multimedia framework (MPEG-21)
ISO 21047:2009 Information and documentation - International Standard Text Code (ISTC)
ISO 21063:2017 Prosthetics and orthotics – Soft orthoses – Uses, functions, classification and description
ISO 21064:2017 Prosthetics and orthotics – Foot orthotics – Uses, functions classification and description
ISO 21065:2017 Prosthetics and orthotics – Terms relating to the treatment and rehabilitation of persons having a lower limb amputation
ISO 21067 Packaging - Vocabulary
- ISO 21067-1:2016 Part 1: General terms
- ISO 21067-2:2015 Part 2: Packaging and the environment terms
ISO/TR 21074:2016 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
ISO/TR 21089:2004 Health informatics – Trusted end-to-end information flows
ISO 21090:2011 Health informatics – Harmonized data types for information interchange
ISO 21091:2013 Health informatics – Directory services for healthcare providers, subjects of care and other entities
ISO 21101:2014 Adventure tourism – Safety management systems – Requirements
ISO/TR 21102:2013 Adventure tourism – Leaders – Personnel competence
ISO 21103:2014 Adventure tourism – Information for participants
ISO/IEC 21118:2012 Information technology – Office equipment – Information to be included in specification sheets – Data projectors
ISO 21127:2014 Information and documentation - A reference ontology for the interchange of cultural heritage information
ISO/TS 21144:2016 Ergonomics of human-system interaction – Electronic paper display – Indoor use
ISO 21148:2017 Cosmetics – Microbiology – General instructions for microbiological examination
ISO 21149:2017 Cosmetics – Microbiology – Enumeration and detection of aerobic mesophilic bacteria
ISO 21150:2015 Cosmetics – Microbiology – Detection of Escherichia coli
ISO 21183 Light conveyor belts
- ISO 21183-2:2005 Part 2: List of equivalent terms
ISO 21187:2004 Milk – Quantitative determination of bacteriological quality – Guidance for establishing and verifying a conversion relationship between routine method results and anchor method results
ISO 21188:2006 Public key infrastructure for financial services – Practices and policy framework
ISO 21210:2012 Intelligent transport systems – Communications access for land mobiles (CALM) – IPv6 Networking
ISO 21212:2008 Intelligent transport systems – Communications access for land mobiles (CALM) – 2G Cellular systems
ISO 21213:2008 Intelligent transport systems – Communications access for land mobiles (CALM) – 3G Cellular systems
ISO 21214:2015 Intelligent transport systems – Communications access for land mobiles (CALM) – Infra-red systems
ISO 21215:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – M5
ISO 21216:2012 Intelligent transport systems – Communication access for land mobiles (CALM) – Millimetre wave air interface
ISO 21217:2014 Intelligent transport systems – Communications access for land mobiles (CALM) – Architecture
ISO 21218:2013 Intelligent transport systems – Communications access for land mobiles (CALM) – Access technology support
ISO/TS 21219 Intelligent transport systems – Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2)
ISO 21247:2005 Combined accept-zero sampling systems and process control procedures for product acceptance
ISO 21254 Lasers and laser-related equipment – Test methods for laser-induced damage threshold
- ISO 21254-1:2011 Part 1: Definitions and general principles
- ISO 21254-2:2011 Part 2: Threshold determination
- ISO 21254-3:2011 Part 3: Assurance of laser power (energy) handling capabilities
- ISO/TR 21254-4:2011 Part 4: Inspection, detection and measurement
ISO 21289:2008 Mechanical vibration and shock – Parameters to be specified for the acquisition of vibration data
ISO 21298:2017 Health informatics - Functional and structural roles
ISO/IEC 21320 Information technology - Document Container File
- ISO/IEC 21320-1:2015 Part 1: Core
ISO/IEC 21407:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Simple dialog supplementary service
ISO/IEC 21408:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Simple dialog supplementary service
ISO/IEC 21409:2001 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Signalling interworking between QSIG and H.323 – Generic functional protocol for the support of supplementary services
ISO/IEC 21410:2001 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Signalling interworking between QSIG and H.323 – Call transfer supplementary services
ISO/IEC 21411:2001 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Signalling interworking between QSIG and H.323 – Call diversion supplementary services
ISO 21413:2005 Manual methods for the measurement of a groundwater level in a well
ISO/TR 21414:2016 Hydrometry – Groundwater – Surface geophysical surveys for hydrogeological purposes
ISO 21439:2009 Clinical dosimetry - Beta radiation sources for brachytherapy
ISO/IEC/IEEE 21450:2010 Information technology - Smart transducer interface for sensors and actuators - Common functions, communication protocols, and Transducer Electronic Data Sheet (TEDS) formats
ISO/IEC/IEEE 21451 Information technology - Smart transducer interface for sensors and actuators
- ISO/IEC/IEEE 21451-1:2010 Part 1: Network Capable Application Processor (NCAP) information model
- ISO/IEC/IEEE 21451-2:2010 Part 2: Transducer to microprocessor communication protocols and Transducer Electronic Data Sheet (TEDS) formats
- ISO/IEC/IEEE 21451-4:2010 Part 4: Mixed-mode communication protocols and Transducer Electronic Data Sheet (TEDS) formats
- ISO/IEC/IEEE 21451-7:2011 Part 7: Transducer to radio frequency identification (RFID) systems communication protocols and Transducer Electronic Data Sheet (TEDS) formats
ISO/IEC 21481:2012 Information technology – Telecommunications and information exchange between systems – Near Field Communication Interface and Protocol -2 (NFCIP-2)
ISO 21482:2007 Ionizing-radiation warning – Supplementary symbol
ISO 21484:2017 Nuclear Energy - Fuel technology - Determination of the O/M ratio in MOX pellets by the gravimetric method
ISO 21485:2013 Textile machinery – Draw frame for cotton spinning – Vocabulary and principles of construction
ISO 21500 Guidance on project management
ISO 21503:2017 Project, programme and portfolio management – Guidance on programme management
ISO 21504:2015 Project, programme and portfolio management – Guidance on portfolio management
ISO 21505:2017 Project, programme and portfolio management - Guidance on governance
ISO 21527 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of yeasts and moulds
- ISO 21527-1:2008 Part 1: Colony count technique in products with water activity greater than 0,95
- ISO 21527-2:2008 Part 2: Colony count technique in products with water activity less than or equal to 0,95
ISO 21528 Microbiology of the food chain - Horizontal method for the detection and enumeration of Enterobacteriaceae
- ISO 21528-1:2017 Part 1: Detection of Enterobacteriaceae
- ISO 21528-2:2017 Part 2: Colony-count technique
ISO 21531:2009 Dentistry - Graphical symbols for dental instruments
ISO 21534:2007 Non-active surgical implants – Joint replacement implants – Particular requirements
ISO 21535:2007 Non-active surgical implants – Joint replacement implants – Specific requirements for hip-joint replacement implants
ISO 21536:2007 Non-active surgical implants – Joint replacement implants – Specific requirements for knee-joint replacement implants
ISO/TS 21547:2010 Health informatics – Security requirements for archiving of electronic health records – Principles
ISO/TR 21548:2010 Health informatics – Security requirements for archiving of electronic health records – Guidelines
ISO 21549 Health informatics – Patient healthcard data
- ISO 21549-1:2013 Part 1: General structure
- ISO 21549-2:2014 Part 2: Common objects
- ISO 21549-3:2014 Part 3: Limited clinical data
- ISO 21549-4:2014 Part 4: Extended clinical data
- ISO 21549-5:2015 Part 5: Identification data
- ISO 21549-6:2008 Part 6: Administrative data
- ISO 21549-7:2016 Part 7: Medication data
- ISO 21549-8:2010 Part 8: Links
ISO 21567:2004 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Shigella spp.
ISO/TS 21609:2014 Road vehicles – (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment
ISO 21649:2006 Needle-free injectors for medical use – Requirements and test methods
ISO 21667:2010 Health informatics – Health indicators conceptual framework
ISO/TR 21707:2008 Intelligent transport systems – Integrated transport information, management and control – Data quality in ITS systems
ISO/TR 21730:2007 Health informatics – Use of mobile wireless communication and computing technology in healthcare facilities – Recommendations for electromagnetic compatibility (management of unintentional electromagnetic interference) with medical devices
ISO/HL7 21731:2014 Health informatics – HL7 version 3 – Reference information model – Release 4
ISO 21748:2017 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
ISO/TS 21749:2005 Measurement uncertainty for metrological applications - Repeated measurements and nested experiments
ISO 21807:2004 Microbiology of food and animal feeding stuffs – Determination of water activity
ISO/IEC 21827:2008 Information technology - Security techniques - Systems Security Engineering - Capability Maturity Model® (SSE-CMM®)
ISO 21849:2006 Aircraft and space - Industrial data - Product identification and traceability
ISO 21871:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the determination of low numbers of presumptive Bacillus cereus – Most probable number technique and detection method
ISO 21872 Microbiology of the food chain – Horizontal method for the determination of Vibrio spp.
- ISO 21872-1:2017 Part 1: Detection of potentially enteropathogenic Vibrio parahaemolyticus, Vibrio cholerae and Vibrio vulnificus
ISO/IEC 21888:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Identification and Call Linkage Additional Network Feature
ISO/IEC 21889:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Identification and Call Linkage Additional Network Feature
ISO/IEC TR 21890:2001 Information technology – Telecommunications and information exchange between systems – Interoperation of PISNs with IP networks
ISO/TR 21932:2013 Sustainability in buildings and civil engineering works – A review of terminology
ISO 21940 Mechanical vibration - Rotor balancing
- ISO 21940-2:2017 Part 2: Vocabulary
ISO/TR 21941:2017 Financial services – Third-party payment service providers
ISO 21969:2009 High-pressure flexible connections for use with medical gas systems
ISO 21987:2017 Ophthalmic optics – Mounted spectacle lenses
ISO/IEC 21989:2002 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Short message service
ISO/IEC 21990:2002 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Short message service
ISO/IEC 21991:2002 Information technology – Telecommunications and information exchange between systems – Corporate Telecommunication Networks – Signalling interworking between QSIG and H.323 – Call completion supplementary services
ISO/IEC 21992:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the tunnelling of QSIG through IP networks

ISO 22000 – ISO 22999

ISO 22000:2005 Food safety management systems – Requirements for any organization in the food chain
ISO/TS 22002 Prerequisite programmes on food safety
- ISO/TS 22002-1:2009 Part 1: Food manufacturing
- ISO/TS 22002-2:2013 Part 2: Catering
- ISO/TS 22002-3:2011 Part 3: Farming
- ISO/TS 22002-4:2013 Part 4: Food packaging manufacturing
- ISO/TS 22002-6:2016 Part 6: Feed and animal food production
ISO/TS 22003:2013 Food safety management systems – Requirements for bodies providing audit and certification of food safety management systems
ISO 22004:2014 Food safety management systems – Guidance on the application of ISO 22000
ISO 22005:2007 Traceability in the feed and food chain – General principles and basic requirements for system design and implementation
ISO 22006:2009 Quality management systems - Guidelines for the application of ISO 9001:2008 to crop production)
ISO/IEC 22050:2002 Information technology – Data interchange on 12,7 mm, 384-track magnetic tape cartridges – Ultrium-1 format
ISO/IEC 22051:2002 Information technology – Data interchange on 12,7 mm, 448-track magnetic tape cartridges – SDLT1 format
ISO 22077 Health informatics – Medical waveform format
- ISO 22077-1:2015 Part 1: Encoding rules
- ISO/TS 22077-2:2015 Part 2: Electrocardiography
- ISO/TS 22077-3:2015 Part 3: Long term electrocardiography
ISO/IEC 22091:2002 Information technology – Streaming Lossless Data Compression algorithm (SLDC)
ISO/IEC 22092:2002 Information technology - Data interchange on 130 mm magneto-optical disk cartridges - Capacity: 9,1 Gbytes per cartridge
ISO 22093 Industrial automation systems and integration – Physical device control – Dimensional Measuring Interface Standard (DMIS)
ISO 22096:2007 Condition monitoring and diagnostics of machines – Acoustic emission
ISO/TR 22100 Safety of machinery – Relationship with ISO 12100
- ISO/TR 22100-3:2016 Part 3: Implementation of ergonomic principles in safety standards
ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs – Specific requirements and guidance for proficiency testing by interlaboratory comparison
ISO 22118:2011 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens – Performance characteristics
ISO 22119:2011 Microbiology of food and animal feeding stuffs – Real-time polymerase chain reaction (PCR) for the detection of food-borne pathogens – General requirements and definitions
ISO 22128:2008 Terminology products and services - Overview and guidance
ISO/TR 22134:2007 Practical guidelines for socioterminology
ISO/TS 22163:2017 Railway applications – Quality management system – Business management system requirements for rail organizations: ISO 9001:2015 and particular requirements for application in the rail sector
ISO 22174:2005 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – General requirements and definitions
ISO/TS 22220:2011 Health informatics – Identification of subjects of health care
ISO/TR 22221:2006 Health informatics – Good principles and practices for a clinical data warehouse
ISO 22222:2005 Personal financial planning—Requirements for personal financial planners
ISO 22241 Diesel engines – NOx reduction agent AUS 32
- ISO 22241-1 Quality requirements
- ISO 22241-2 Test methods
- ISO 22241-3 Handling, transportation and storing
ISO/IEC TR 22250 Information technology – Document description and processing languages – Regular Language Description for XML (RELAX)
- ISO/IEC TR 22250-1:2002 RELAX Core
ISO 22266 Mechanical vibration – Torsional vibration of rotating machinery
- ISO 22266-1:2009 Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
ISO 22274:2013 Systems to manage terminology, knowledge and content - Concept-related aspects for developing and internationalizing classification systems
ISO 22300:2012 Societal security - Terminology
ISO 22301:2012 Societal security – Business continuity management systems – Requirements
ISO 22307:2008 Financial services – Privacy impact assessment
ISO 22310:2006 Information and documentation - Guidelines for standards drafters for stating records management requirements in standards
ISO 22311:2012 Societal security – Video-surveillance – Export interoperability
ISO/TR 22312:2011 Societal security – Technological capabilities
ISO 22313:2012 Societal security – Business continuity management systems – Guidance
ISO 22315:2014 Societal security – Mass evacuation – Guidelines for planning
ISO 22316:2017 Security and resilience - Organizational resilience—Principles and attributes
ISO/TS 22317:2015 Societal security – Business continuity management systems – Guidelines for business impact analysis (BIA)
ISO/TS 22318:2015 Societal security – Business continuity management systems – Guidelines for supply chain continuity
ISO 22319:2017 Security and resilience - Community resilience - Guidelines for planning the involvement of spontaneous volunteers
ISO 22320:2011 Societal security – Emergency management – Requirements for incident response
ISO 22322:2015 Societal security – Emergency management – Guidelines for public warning
ISO 22324:2015 Societal security – Emergency management – Guidelines for colour-coded alerts
ISO 22325:2016 Security and resilience – Emergency management – Guidelines for capability assessment
ISO/TR 22351:2015 Societal security – Emergency management – Message structure for exchange of information
ISO 22397:2014 Societal security – Guidelines for establishing partnering arrangements
ISO 22398:2013 Societal security – Guidelines for exercises
ISO/PAS 22399:2007 Societal security – Guideline for incident preparedness and operational continuity management
ISO/TR 22411:2008 Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities
ISO 22412:2017 Particle size analysis - Dynamic light scattering (DLS)
ISO 22413:2010 Transfer sets for pharmaceutical preparations – Requirements and test methods
ISO 22432:2011 Geometrical product specifications (GPS) - Features utilized in specification and verification
ISO/TS 22475 Geotechnical investigation and testing – Sampling methods and groundwater measurements
- ISO/TS 22475-3:2007 Part 3: Conformity assessment of enterprises and personnel by third party
ISO 22493:2014 Microbeam analysis - Scanning electron microscopy - Vocabulary
ISO 22514 Statistical methods in process management - Capability and performance
- ISO 22514-1:2014 Part 1: General principles and concepts
- ISO 22514-2:2017 Part 2: Process capability and performance of time-dependent process models
- ISO 22514-3:2008 Part 3: Machine performance studies for measured data on discrete parts
- ISO 22514-4:2016 Part 4: Process capability estimates and performance measures
- ISO 22514-6:2013 Part 6: Process capability statistics for characteristics following a multivariate normal distribution
- ISO 22514-7:2012 Part 7: Capability of measurement processes
- ISO 22514-8:2014 Part 8: Machine performance of a multi-state production process
ISO 22523:2006 External limb prostheses and external orthoses – Requirements and test methods
ISO/IEC 22533:2005 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 2,3 Gbytes per cartridge
ISO/IEC 22534:2005 Information technology – Telecommunications and information exchange between systems – Application session services
ISO/IEC 22535:2009 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Tunnelling of QSIG over SIP
ISO/IEC 22536:2013 Information technology - Telecommunications and information exchange between systems - Near Field Communication Interface and Protocol (NFCIP-1) - RF interface test methods
ISO/IEC 22537:2006 Information technology - ECMAScript for XML (E4X) specification
ISO/TR 22588:2005 Optics and photonics – Lasers and laser-related equipment – Measurement and evaluation of absorption-induced effects in laser optical components
ISO 22600 Health informatics – Privilege management and access control
- ISO 22600-1:2014 Part 1: Overview and policy management
- ISO 22600-2:2014 Part 2: Formal models
- ISO 22600-3:2014 Part 3: Implementations
ISO 22665:2012 Ophthalmic optics and instruments – Instruments to measure axial distances in the eye
ISO 22675:2016 Prosthetics – Testing of ankle-foot devices and foot units – Requirements and test methods
ISO/TR 22676:2006 Prosthetics – Testing of ankle-foot devices and foot units – Guidance on the application of the test loading conditions of ISO 22675 and on the design of appropriate test equipment
ISO 22716:2007 Cosmetics – Good Manufacturing Practices (GMP) – Guidelines on Good Manufacturing Practices
ISO 22717:2015 Cosmetics – Microbiology – Detection of Pseudomonas aeruginosa
ISO 22718:2015 Cosmetics – Microbiology – Detection of Staphylococcus aureus
ISO 22727:2007 Graphical symbols - Creation and design of public information symbols - Requirements
ISO 22742:2010 Packaging - Linear bar code and two-dimensional symbols for product packaging
ISO 22745 Industrial automation systems and integration - Open technical dictionaries and their application to master data
- ISO 22745-2:2010 Part 2: Vocabulary
ISO/IEC TR 22767:2005 Information technology – Telecommunications and information exchange between systems – Using CSTA for SIP phone user agents (uaCSTA)
ISO/TS 22789:2010 Health informatics – Conceptual framework for patient findings and problems in terminologies
ISO/TS 22809:2007 Non-destructive testing – Discontinuities in specimens for use in qualification examinations
ISO 22829:2017 Resistance welding equipment – Transformers – Integrated transformer-rectifier units for welding guns operating at 1 000 Hz
ISO 22837:2009 Vehicle probe data for wide area communications
ISO 22839:2013 Intelligent transport systems – Forward vehicle collision mitigation systems – Operation, performance, and verification requirements
ISO 22840:2010 Intelligent transport systems – Devices to aid reverse manoeuvres – Extended-range backing aid systems (ERBA)
ISO/PAS 22853:2005 Ships and marine technology – Computer applications – Specification of Maritime Safety Markup Language (MSML)
ISO 22857:2013 Health informatics – Guidelines on data protection to facilitate trans-border flows of personal health data
ISO 22868:2011 Forestry and gardening machinery – Noise test code for portable hand-held machines with internal combustion engine – Engineering method (Grade 2 accuracy)
ISO 22870:2016 Point-of-care testing (POCT) – Requirements for quality and competence
ISO 22877:2004 Castors and wheels – Vocabulary, symbols and multilingual terminology
ISO 22935 Milk and milk products – Sensory analysis
- ISO 22935-1:2009 Part 1: General guidance for the recruitment, selection, training and monitoring of assessors
ISO 22951:2009 Data dictionary and message sets for preemption and prioritization signal systems for emergency and public transport vehicles (PRESTO)
ISO 22964:2017 Microbiology of the food chain - Horizontal method for the detection of Cronobacter spp.
ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
ISO/TR 22979:2017 Ophthalmic implants – Intraocular lenses – Guidance on assessment of the need for clinical investigation of intraocular lens design modifications

ISO 23000 – ISO 23999

ISO/IEC 23000 Information technology - Multimedia application format (MPEG-A)
ISO/IEC 23001 Information technology – MPEG systems technologies
- ISO/IEC 23001-1:2006 Part 1: Binary MPEG format for XML
- ISO/IEC 23001-2:2008 Part 2: Fragment request units
- ISO/IEC 23001-3:2008 Part 3: XML IPMP messages
- ISO/IEC 23001-4:2017 Part 4: Codec configuration representation
- ISO/IEC 23001-5:2008 Part 5: Bitstream Syntax Description Language (BSDL)
- ISO/IEC 23001-7:2016 Part 7: Common encryption in ISO base media file format
- ISO/IEC 23001-8:2016 Part 8: Coding-independent code points
- ISO/IEC 23001-9:2016 Part 9: Common encryption of MPEG-2 transport streams
- ISO/IEC 23001-10:2015 Part 10: Carriage of timed metadata metrics of media in ISO base media file format
- ISO/IEC 23001-12:2015 Part 12: Sample Variants in the ISO base media file format
ISO/IEC 23002 Information technology – MPEG video technologies
ISO/IEC 23003 Information technology – MPEG audio technologies
- ISO/IEC 23003-1:2007 Part 1: MPEG Surround
- ISO/IEC 23003-2:2010 Part 2: Spatial Audio Object Coding (SAOC)
- ISO/IEC 23003-3:2012 Part 3: Unified speech and audio coding
- ISO/IEC 23003-4:2015 Part 4: Dynamic Range Control
ISO/IEC 23004 Information technology - Multimedia Middleware
- ISO/IEC 23004-1:2007 Part 1: Architecture
- ISO/IEC 23004-2:2007 Part 2: Multimedia application programming interface (API)
- ISO/IEC 23004-3:2007 Part 3: Component model
- ISO/IEC 23004-4:2007 Part 4: Resource and quality management
- ISO/IEC 23004-5:2008 Part 5: Component download
- ISO/IEC 23004-6:2008 Part 6: Fault management
- ISO/IEC 23004-7:2008 Part 7: System integrity management
- ISO/IEC 23004-8:2009 Part 8: Reference software
ISO/IEC 23005 Information technology - Media context and control
- ISO/IEC 23005-1:2016 Part 1: Architecture
- ISO/IEC 23005-2:2016 Part 2: Control information
- ISO/IEC 23005-3:2016 Part 3: Sensory information
- ISO/IEC 23005-4:2016 Part 4: Virtual world object characteristics
- ISO/IEC 23005-5:2016 Part 5: Data formats for interaction devices
- ISO/IEC 23005-6:2016 Part 6: Common types and tools
- ISO/IEC 23005-7:2017 Part 7: Conformance and reference software
ISO/IEC 23006 Information technology - Multimedia service platform technologies
- ISO/IEC 23006-1:2013 Part 1: Architecture
- ISO/IEC 23006-2:2016 Part 2: MPEG extensible middleware (MXM) API
- ISO/IEC 23006-3:2016 Part 3: Conformance and reference software
- ISO/IEC 23006-4:2013 Part 4: Elementary services
- ISO/IEC 23006-5:2013 Part 5: Service aggregation
ISO/IEC 23007 Information technology - Rich media user interfaces
- ISO/IEC 23007-1:2010 Part 1: Widgets
- ISO/IEC 23007-2:2012 Part 2: Advanced user interaction (AUI) interfaces
- ISO/IEC 23007-3:2011 Part 3: Conformance and reference software
ISO/IEC 23008 Information technology - High efficiency coding and media delivery in heterogeneous environments
ISO/IEC 23009 Information technology - Dynamic adaptive streaming over HTTP (DASH)
- ISO/IEC 23009-1:2014 Part 1: Media presentation description and segment formats
- ISO/IEC 23009-2:2014 Part 2: Conformance and reference software
- ISO/IEC TR 23009-3:2015 Part 3: Implementation guidelines
- ISO/IEC 23009-4:2013 Part 4: Segment encryption and authentication
- ISO/IEC 23009-5:2017 Part 5: Server and network assisted DASH (SAND)
ISO/IEC/IEEE 23026:2015 Systems and software engineering - Engineering and management of websites for systems, software, and services information
ISO 23081 Information and documentation - Managing metadata for records^{[Note 3]}
- ISO 23081-1:2006 Part 1: Principles
- ISO 23081-2:2009 Part 2: Conceptual and implementation issues
- ISO/TR 23081-3:2011 Part 3: Self-assessment method
ISO/TS 23165:2006 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty
ISO 23185:2009 Assessment and benchmarking of terminological resources - General concepts, principles and requirements
ISO/TR 23211:2009 Hydrometry – Measuring the water level in a well using automated pressure transducer methods
ISO/IEC 23270:2006 Information technology – Programming languages – C#
ISO/IEC 23271:2012 Information technology – Common Language Infrastructure (CLI)
ISO/IEC TR 23272:2011 Information technology - Common Language Infrastructure (CLI) - Information Derived from Partition IV XML File
ISO/IEC 23289:2002 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Signalling interworking between QSIG and H.323 – Basic services
ISO/IEC 23290:2004 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network (PISN) – Mapping functions for the tunnelling of QSIG through H.323 networks
ISO 23317:2014 Implants for surgery – In vitro evaluation for apatite-forming ability of implant materials
ISO 23328 Breathing system filters for anaesthetic and respiratory use
- ISO 23328-1:2003 Part 1: Salt test method to assess filtration performance
- ISO 23328-2:2002 Part 2: Non-filtration aspects
ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1
ISO 23500:2014 Guidance for the preparation and quality management of fluids for haemodialysis and related therapies
ISO 23539:2005 Photometry - The CIE system of physical photometry
ISO 23599:2012 Assistive products for blind and vision-impaired persons - Tactile walking surface indicators
ISO 23600:2007 Assistive products for persons with vision impairments and persons with vision and hearing impairments - Acoustic and tactile signals for pedestrian traffic lights
ISO 23601:2009 Safety identification - Escape and evacuation plan signs
ISO 23603:2005 Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour
ISO/TR 23605:2009 Technical product specification (TPS) – Application guidance – International model for national implementation
ISO/IEC 23651:2003 Information technology – 8 mm wide magnetic tape cartridge for information interchange – Helical scan recording – AIT-3 format
ISO 23718:2007 Metallic materials – Mechanical testing – Vocabulary
ISO 23733 Textiles – Chenille yarns – Test method for the determination of linear density
ISO 23747:2015 Anaesthetic and respiratory equipment – Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
ISO/TS 23768 Rolling bearings - Parts library
- ISO/TS 23768-1:2011 Part 1: Reference dictionary for rolling bearings
ISO 23771:2015 Textile machinery – Guide to the design of textile machinery for reduction of the noise emissions
ISO/TS 23810:2012 Cardiovascular implants and artificial organs – Checklist for preoperative extracorporeal circulation equipment setup
ISO 23813:2007 Cranes – Training of appointed persons
ISO 23814:2009 Cranes – Competency requirements for crane inspectors
ISO 23833:2013 Microbeam analysis – Electron probe microanalysis (EPMA) – Vocabulary
ISO 23853:2004 Cranes – Training of slingers and signallers
ISO 23907:2012 Sharps injury protection – Requirements and test methods – Sharps containers
ISO 23908:2011 Sharps injury protection – Requirements and test methods – Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
ISO/IEC 23912:2005 Information technology - 80 mm (1,46 Gbytes per side) and 120 mm (4,70 Gbytes per side) DVD Recordable Disk (DVD-R)
ISO/IEC 23915:2005 Information technology – Telecommunications and information exchange between systems – Corporate Telecommunication Networks – Signalling Interworking between QSIG and SIP – Call Diversion
ISO/IEC 23916:2005 Information technology – Telecommunications and information exchange between systems – Corporate Telecommunication Networks – Signalling Interworking between QSIG and SIP – Call Transfer
ISO/IEC 23917:2005 Information technology – Telecommunications and information exchange between systems – NFCIP-1 – Protocol Test Methods
ISO 23950:1998 Information and documentation – Information retrieval (Z39.50) – Application service definition and protocol specification
ISO 23953 Refrigerated display cabinets
- ISO 23953-1:2015 Part 1: Vocabulary
ISO/IEC 23988:2007 Information technology - A code of practice for the use of information technology (IT) in the delivery of assessments

ISO 24000 – ISO 24999

ISO 24013:2006 Optics and photonics – Lasers and laser-related equipment – Measurement of phase retardation of optical components for polarized laser radiation
ISO 24014 Public transport – Interoperable fare management system
- ISO 24014-1:2015 Part 1: Architecture
- ISO/TR 24014-2:2013 Part 2: Business practices
- ISO/TR 24014-3:2013 Part 3: Complementary concepts to Part 1 for multi-application media
ISO 24097 Intelligent transport systems – Using web services (machine-machine delivery) for ITS service delivery
- ISO 24097-1:2017 Part 1: Realization of interoperable web services
- ISO/TR 24097-2:2015 Part 2: Elaboration of interoperable web services' interfaces
ISO/TR 24098:2007 Intelligent transport systems – System architecture, taxonomy and terminology – Procedures for developing ITS deployment plans utilizing ITS system architecture
ISO 24099:2011 Navigation data delivery structures and protocols
ISO 24100:2010 Intelligent transport systems – Basic principles for personal data protection in probe vehicle information services
ISO 24101 Intelligent transport systems – Communications access for land mobiles (CALM) – Application management
- ISO 24101-1:2008 Part 1: General requirements
- ISO 24101-2:2010 Part 2: Conformance test
ISO 24102 Intelligent transport systems – Communications access for land mobiles (CALM) – ITS station management
- ISO 24102-1:2013 Part 1: Local management
- ISO 24102-2:2015 Part 2: Remote management of ITS-SCUs
- ISO 24102-3:2013 Part 3: Service access points
- ISO 24102-4:2013 Part 4: Station-internal management communications
- ISO 24102-5:2013 Part 5: Fast service advertisement protocol (FSAP)
ISO 24103:2009 Intelligent transport systems – Communications access for land mobiles (CALM) – Media adapted interface layer (MAIL)
ISO 24153:2009 Random sampling and randomization procedures
ISO 24155:2016 Hydrometry – Hydrometric data transmission systems – Specification of system requirements
ISO 24156 Graphic notations for concept modelling in terminology work and its relationship with UML
- ISO 24156-1:2014 Part 1: Guidelines for using UML notation in terminology work
ISO 24157:2008 Ophthalmic optics and instruments – Reporting aberrations of the human eye
ISO 24294:2013 Timber – Round and sawn timber – Vocabulary
ISO/TS 24348:2014 Ophthalmic optics – Spectacle frames – Method for the simulation of wear and detection of nickel release from metal and combination spectacle frames
ISO 24393:2008 Rolling bearings - Linear motion rolling bearings - Vocabulary
ISO 24408:2005 Ships and marine technology - Position-indicating lights for life-saving appliances - Testing, inspection and marking of production units
ISO 24409 Ships and marine technology - Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings
- ISO 24409-1:2010 Part 1: Design principles
- ISO 24409-2:2014 Part 2: Catalogue
- ISO 24409-3:2014 Part 3: Code of practice
ISO 24497 Non-destructive testing - Metal magnetic memory
- ISO 24497-1:2007 Part 1: Vocabulary
ISO 24502:2010 Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light
ISO 24503:2011 Ergonomics - Accessible design - Tactile dots and bars on consumer products
ISO 24510:2007 Activities relating to drinking water and wastewater services – Guidelines for the assessment and for the improvement of the service to users
ISO 24517 Document management - Engineering document format using PDF
- ISO 24517-1:2008 Part 1: Use of PDF 1.6 (PDF/E-1)
ISO 24518:2015 Activities relating to drinking water and wastewater services – Crisis management of water utilities
ISO/TS 24520:2017 Service activities relating to drinking water supply systems and wastewater systems – Crisis management – Good practice for technical aspects
ISO 24521:2016 Activities relating to drinking water and wastewater services – Guidelines for the management of basic on-site domestic wastewater services
ISO 24523:2017 Service activities relating to drinking water supply systems and wastewater systems – Guidelines for benchmarking of water utilities
ISO/TR 24529:2008 Intelligent transport systems – Systems architecture – Use of unified modelling language (UML) in ITS International Standards and deliverables
ISO/TS 24530 Traffic and Travel Information (TTI) – TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML)
- ISO/TS 24530-1:2006 Part 1: Introduction, common data types and tpegML
- ISO/TS 24530-2:2006 Part 2: tpeg-locML
- ISO/TS 24530-3:2006 Part 3: tpeg-rtmML
- ISO/TS 24530-4:2006 Part 4: tpeg-ptiML
ISO 24531:2013 Intelligent transport systems – System architecture, taxonomy and terminology – Using XML in ITS standards, data registries and data dictionaries
ISO/TR 24532:2006 Intelligent transport systems – Systems architecture, taxonomy and terminology – Using CORBA (Common Object Request Broker Architecture) in ITS standards, data registries and data dictionaries
ISO/TS 24533:2012 Intelligent transport systems – Electronic information exchange to facilitate the movement of freight and its intermodal transfer – Road transport information exchange methodology
ISO 24534 Intelligent transport systems – Automatic vehicle and equipment identification – Electronic registration identification (ERI) for vehicles^{[Note 3]}
- ISO 24534-1:2010 Part 1: Architecture
- ISO 24534-2:2010 Part 2: Operational requirements
- ISO 24534-3:2016 Part 3: Vehicle data
- ISO 24534-4:2010 Part 4: Secure communications using asymmetrical techniques
- ISO 24534-5:2011 Part 5: Secure communications using symmetrical techniques
ISO 24535:2007 Intelligent transport systems – Automatic vehicle identification – Basic electronic registration identification (Basic ERI)
ISO/IEC 24570:2005 Software engineering - NESMA functional size measurement method version 2.1 - Definitions and counting guidelines for the application of Function Point Analysis
ISO/TR 24578:2012 Hydrometry – Acoustic Doppler profiler – Method and application for measurement of flow in open channels
ISO 24610 Language resource management - Feature structures
- ISO 24610-1:2006 Part 1: Feature structure representation
- ISO 24610-2:2011 Part 2: Feature system declaration
ISO 24611:2012 Language resource management - Morpho-syntactic annotation framework (MAF)
ISO 24612:2012 Language resource management - Linguistic annotation framework (LAF)
ISO 24613:2008 Language resource management - Lexical markup framework (LMF)
ISO 24614 Language resource management - Word segmentation of written texts
- ISO 24614-1:2010 Part 1: Basic concepts and general principles
- ISO 24614-2:2011 Part 2: Word segmentation for Chinese, Japanese and Korean
ISO 24615 Language resource management - Syntactic annotation framework (SynAF)
- ISO 24615-1:2014 Part 1: Syntactic model
ISO 24616:2012 Language resources management - Multilingual information framework
ISO 24617 Language resource management - Semantic annotation framework (SemAF)
- ISO 24617-1:2012 Part 1: Time and events (SemAF-Time, ISO-TimeML)
- ISO 24617-2:2012 Part 2: Dialogue acts
- ISO 24617-4:2014 Part 4: Semantic roles (SemAF-SR)
- ISO/TS 24617-5:2014 Part 5: Discourse structure (SemAF-DS)
- ISO 24617-6:2016 Part 6: Principles of semantic annotation (SemAF Principles)
- ISO 24617-7:2014 Part 7: Spatial information (ISOspace)
- ISO 24617-8:2016 Part 8: Semantic relations in discourse, core annotation schema (DR-core)
ISO 24619:2011 Language resource management - Persistent identification and sustainable access (PISA)
ISO/TS 24620 Language resource management - Controlled natural language (CNL)
- ISO/TS 24620-1:2015 Part 1: Basic concepts and principles
ISO 24622 Language resource management - Component Metadata Infrastructure (CMDI)
- ISO 24622-1:2015 Part 1: The Component Metadata Model
ISO 24624:2016 Language resource management - Transcription of spoken language
ISO/IEC 24700:2005 Quality and performance of office equipment that contains reused components
ISO/IEC 24702:2006 Information technology - Generic cabling - Industrial premises
ISO/IEC 24703:2004 Information technology - Participant Identifiers
ISO/IEC TR 24704:2004 Information technology - Customer premises cabling for wireless access points
ISO/IEC 24707:2007 Information technology – Common Logic (CL): a framework for a family of logic-based languages
ISO/IEC 24708:2008 Information technology – Biometrics – BioAPI Interworking Protocol
ISO/IEC 24709 Information technology – Conformance testing for the biometric application programming interface (BioAPI)
- ISO/IEC 24709-1:2007 Part 1: Methods and procedures
- ISO/IEC 24709-2:2007 Part 2: Test assertions for biometric service providers
- ISO/IEC 24709-3:2011 Part 3: Test assertions for BioAPI frameworks
ISO/IEC TR 24710:2005 Information technology - Radio frequency identification for item management - Elementary tag licence plate functionality for ISO/IEC 18000 air interface definitions
ISO/IEC 24713 Information technology – Biometric profiles for interoperability and data interchange
- ISO/IEC 24713-1:2008 Part 1: Overview of biometric systems and biometric profiles
- ISO/IEC 24713-2:2008 Part 2: Physical access control for employees at airports
- ISO/IEC 24713-3:2009 Part 3: Biometrics-based verification and identification of seafarers
ISO/IEC TR 24714 Information technology - Biometrics - Jurisdictional and societal considerations for commercial applications
- ISO/IEC TR 24714-1:2008 Part 1: General guidance
ISO/IEC TR 24715:2006 Information technology - Programming languages, their environments and system software interfaces - Technical Report on the Conflicts between the ISO/IEC 9945 (POSIX) and the Linux Standard Base (ISO/IEC 23360)
ISO/IEC TR 24716:2007 Information technology - Programming languages, their environment and system software interfaces - Native COBOL Syntax for XML Support
ISO/IEC TR 24717:2009 Information technology - Programming languages, their environments and system software interfaces - Collection classes for programming language COBOL
ISO/IEC TR 24718:2005 Information technology - Programming languages - Guide for the use of the Ada Ravenscar Profile in high integrity systems
ISO/IEC TR 24720:2008 Information technology - Automatic identification and data capture techniques - Guidelines for direct part marking (DPM)
ISO/IEC TR 24722:2015 Information technology – Biometrics – Multimodal and other multibiometric fusion
ISO/IEC 24723:2010 Information technology - Automatic identification and data capture techniques - GS1 Composite bar code symbology specification
ISO/IEC 24724:2011 Information technology - Automatic identification and data capture techniques - GS1 DataBar bar code symbology specification
ISO/IEC 24727 Identification cards – Integrated circuit card programming interfaces
ISO/IEC 24728:2006 Information technology - Automatic identification and data capture techniques - MicroPDF417 bar code symbology specification
ISO/IEC TR 24729 Information technology - Radio frequency identification for item management - Implementation guidelines
- ISO/IEC TR 24729-1:2008 Part 1: RFID-enabled labels and packaging supporting ISO/IEC 18000-6C
- ISO/IEC TR 24729-2:2008 Part 2: Recycling and RFID tags
- ISO/IEC TR 24729-3:2009 Part 3: Implementation and operation of UHF RFID Interrogator systems in logistics applications
- ISO/IEC TR 24729-4:2009 Part 4: Tag data security
ISO/IEC 24730 Information technology - Real-time locating systems (RTLS)
- ISO/IEC 24730-1:2014 Part 1: Application programming interface (API)
- ISO/IEC 24730-2:2012 Part 2: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol
- ISO/IEC 24730-5:2010 Part 5: Chirp spread spectrum (CSS) at 2,4 GHz air interface
- ISO/IEC 24730-21:2012 Part 21: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with a single spread code and employing a DBPSK data encoding and BPSK spreading scheme
- ISO/IEC 24730-22:2012 Part 22: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with multiple spread codes and employing a QPSK data encoding and Walsh offset QPSK (WOQPSK) spreading scheme
- ISO/IEC 24730-61:2013 Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
- ISO/IEC 24730-62:2013 Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
ISO/IEC TR 24731 Information technology - Programming languages, their environments and system software interfaces - Extensions to the C library
- ISO/IEC TR 24731-1:2007 Part 1: Bounds-checking interfaces
- ISO/IEC TR 24731-2:2010 Part 2: Dynamic Allocation Functions
ISO/IEC TR 24732:2009 Information technology - Programming languages, their environments and system software interfaces - Extension for the programming language C to support decimal floating-point arithmetic
ISO/IEC TR 24733:2011 Information technology - Programming languages, their environments and system software interfaces - Extensions for the programming language C++ to support decimal floating-point arithmetic
ISO/IEC 24738:2006 Information technology – Icon symbols and functions for multimedia link attributes
ISO/IEC 24739 Information technology - AT Attachment with Packet Interface - 7
- ISO/IEC 24739-1:2009 Part 1: Register Delivered Command Set, Logical Register Set (ATA/ATAPI-7 V1)
- ISO/IEC 24739-2:2009 Part 2: Parallel transport protocols and physical interconnect (ATA/ATAPI-7)
- ISO/IEC 24739-3:2010 Part 3: Serial transport protocols and physical interconnect (ATA/ATAPI-7 V3)
ISO/IEC 24740:2008 Information technology - Responsive Link (RL)
ISO/IEC TR 24741:2007 Information technology – Biometrics tutorial
ISO/IEC 24744:2014 Software Engineering – Metamodel for Development Methodologies
ISO/IEC 24745:2011 Information technology - Security techniques - Biometric information protection
ISO/IEC TR 24746:2005 Information technology - Generic cabling for customer premises - Mid-span DTE power insertion
ISO/IEC 24747:2009 Information technology - Programming languages, their environments and system software interfaces - Extensions to the C Library to support mathematical special functions
ISO/IEC 24748 Systems and software engineering - Life cycle management
- ISO/IEC TS 24748-1:2016 Part 1: Guidelines for life cycle
- ISO/IEC TR 24748-2:2011 Part 2: Guide to the application of ISO/IEC 15288 (System life cycle processes)
- ISO/IEC TR 24748-3:2011 Part 3: Guide to the application of ISO/IEC 12207 (Software life cycle processes)
- ISO/IEC/IEEE 24748-4:2016 Part 4: Systems engineering planning
- ISO/IEC/IEEE 24748-5:2017 Part 5: Software development planning
- ISO/IEC TS 24748-6:2016 Part 6: System integration engineering
ISO/IEC TR 24750:2007 Information technology - Assessment and mitigation of installed balanced cabling channels in order to support of 10GBASE-T
ISO/IEC 24751 Information technology - Individualized adaptability and accessibility in e-learning, education and training
- ISO/IEC 24751-1:2008 Part 1: Framework and reference model
- ISO/IEC 24751-2:2008 Part 2: "Access for all" personal needs and preferences for digital delivery
- ISO/IEC 24751-3:2008 Part 3: "Access for all" digital resource description
ISO/IEC 24752 Information technology – User interfaces – Universal remote console
ISO/IEC 24753:2011 Information technology - Radio frequency identification (RFID) for item management - Application protocol: encoding and processing rules for sensors and batteries
ISO/IEC 24754 Information technology - Document description and processing languages - Minimum requirements for specifying document rendering systems
- ISO/IEC 24754-1:2008 Part 1: Feature specifications for document rendering systems
- ISO/IEC TR 24754-2:2011 Part 2: Formatting specifications for document rendering systems
ISO/IEC 24755:2007 Information technology - Screen icons and symbols for personal mobile communication devices
ISO/IEC 24756:2009 Information technology - Framework for specifying a common access profile (CAP) of needs and capabilities of users, systems, and their environments
ISO/IEC 24757:2008 Information technology - Keyboard interaction model - Machine-readable keyboard description
ISO/IEC 24759:2017 Information technology - Security techniques - Test requirements for cryptographic modules
ISO/IEC 24760 Information technology - Security techniques - A framework for identity management
- ISO/IEC 24760-1:2011 Part 1: Terminology and concepts
- ISO/IEC 24760-2:2015 Part 2: Reference architecture and requirements
- ISO/IEC 24760-3:2016 Part 3: Practice
ISO/IEC 24761:2009 Information technology - Security techniques - Authentication context for biometrics
ISO/IEC 24762:2008 Information technology – Security techniques – Guidelines for information and communications technology disaster recovery services
ISO/IEC TR 24763:2011 Information technology - Learning, education and training - Conceptual Reference Model for Competency Information and Related Objects
ISO/IEC 24764:2010 Information technology - Generic cabling systems for data centres
ISO/IEC/IEEE 24765:2017 Systems and software engineering - Vocabulary
ISO/IEC TR 24766:2009 Information technology - Systems and software engineering - Guide for requirements engineering tool capabilities
ISO/IEC 24767 Information technology - Home network security
- ISO/IEC 24767-1:2008 Part 1: Security requirements
- ISO/IEC 24767-2:2009 Part 2: Internal security services: Secure Communication Protocol for Middleware (SCPM)
ISO/IEC 24769 Information technology - Real-time locating systems (RTLS) device conformance test methods
- ISO/IEC 24769-2:2013 Part 2: Test methods for air interface communication at 2,4 GHz
- ISO/IEC 24769-5:2012 Part 5: Test methods for chirp spread spectrum (CSS) at 2,4 GHz air interface
- ISO/IEC 24769-61:2015 Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
- ISO/IEC 24769-62:2015 Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
ISO/IEC 24770:2012 Information technology - Real-time locating system (RTLS) device performance test methods - Test methods for air interface communication at 2,4 GHz
- ISO/IEC 24770-61:2015 Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface
- ISO/IEC 24770-62:2015 Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface
ISO/IEC 24771:2014 Information technology – Telecommunications and information exchange between systems – MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment
ISO/IEC TR 24772:2013 Information technology - Programming languages - Guidance to avoiding vulnerabilities in programming languages through language selection and use
ISO/IEC 24773:2008 Software engineering - Certification of software engineering professionals - Comparison framework
ISO/IEC TR 24774:2010 Systems and software engineering - Life cycle management - Guidelines for process description
ISO/IEC 24775 Information technology - Storage management
- ISO/IEC 24775-1:2014 Part 1: Overview
- ISO/IEC 24775-2:2014 Part 2: Common Architecture
- ISO/IEC 24775-3:2014 Part 3: Common Profiles
- ISO/IEC 24775-4:2014 Part 4: Block Devices
- ISO/IEC 24775-5:2014 Part 5: File systems
- ISO/IEC 24775-6:2014 Part 6: Fabric
- ISO/IEC 24775-7:2014 Part 7: Host Elements
- ISO/IEC 24775-8:2014 Part 8: Media Libraries
ISO/IEC 24778:2008 Information technology - Automatic identification and data capture techniques - Aztec Code bar code symbology specification
ISO/IEC 24779 Information technology - Cross-jurisdictional and societal aspects of implementation of biometric technologies - Pictograms, icons and symbols for use with biometric systems
- ISO/IEC 24779-1:2016 Part 1: General principles
- ISO/IEC 24779-4:2017 Part 4: Fingerprint applications
- ISO/IEC 24779-9:2015 Part 9: Vascular applications
ISO/IEC TR 24785:2009 Information technology – Taxonomy of cultural and linguistic adaptability user requirements
ISO/IEC 24786:2009 Information technology – User interfaces – Accessible user interface for accessibility settings
ISO/IEC 24787:2010 Information technology – Identification cards – On-card biometric comparison
ISO/IEC 24789 Identification cards – Card service life
- ISO/IEC 24789-1:2012 Part 1: Application profiles and requirements
- ISO/IEC 24789-2:2011 Part 2: Methods of evaluation
ISO/IEC 24791 Information technology - Radio frequency identification (RFID) for item management - Software system infrastructure
- ISO/IEC 24791-1:2010 Part 1: Architecture
- ISO/IEC 24791-2:2011 Part 2: Data management
- ISO/IEC 24791-3:2014 Part 3: Device management
- ISO/IEC 24791-5:2012 Part 5: Device interface
ISO/IEC 24792:2010 Information technology – Telecommunications and information exchange between systems – Multicast Session Management Protocol (MSMP)
ISO/IEC 24793 Information technology – Mobile multicast communications
- ISO/IEC 24793-1:2010 Framework
- ISO/IEC 24793-2:2010 Protocol over native IP multicast networks
ISO/IEC 24800 Information technology - JPSearch
- ISO/IEC TR 24800-1:2012 Part 1: System framework and components
- ISO/IEC 24800-2:2011 Part 2: Registration, identification and management of schema and ontology
- ISO/IEC 24800-3:2010 Part 3: Query format
- ISO/IEC 24800-4:2010 Part 4: File format for metadata embedded in image data (JPEG and JPEG 2000)
- ISO/IEC 24800-5:2011 Part 5: Data interchange format between image repositories
- ISO/IEC 24800-6:2012 Part 6: Reference software
ISO 24801 Recreational diving services – Requirements for the training of recreational scuba divers
- ISO 24801-1:2014 Part 1: Level 1 – Supervised diver
- ISO 24801-2:2014 Part 2: Level 2 – Autonomous diver
- ISO 24801-3:2014 Part 3: Level 3 – Dive leader
ISO 24802 Recreational diving services – Requirements for the training of scuba instructors
- ISO 24802-1:2014 Part 1: Level 1
- ISO 24802-2:2014 Part 2: Level 2
ISO 24803:2017 Recreational diving services – Requirements for recreational diving providers
ISO/IEC 24824 Information technology – Generic applications of ASN.1
- ISO/IEC 24824-1:2007 Fast infoset
- ISO/IEC 24824-2:2006 Fast Web Services
- ISO/IEC 24824-3:2008 Fast infoset security
ISO/TR 24971:2013 Medical devices – Guidance on the application of ISO 14971
ISO 24978:2009 Intelligent transport systems – ITS Safety and emergency messages using any available wireless media – Data registry procedures

ISO 25000 – ISO 25999

ISO/IEC 25000:2014 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Guide to SQuaRE
ISO/IEC 25001:2014 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Planning and management
ISO/IEC 25010:2011 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - System and software quality models
ISO/IEC TS 25011:2017 Information technology - Systems and software quality requirements and evaluation (SQuaRE) - Service quality models
ISO/IEC 25012:2008 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Data quality model
ISO/IEC 25020:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Measurement reference model and guide
ISO/IEC 25021:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality measure elements
ISO/IEC 25022:2016 Systems and software engineering - Systems and software quality requirements and evaluation (SQuaRE) - Measurement of quality in use
ISO/IEC 25023:2016 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of system and software product quality
ISO/IEC 25024:2015 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of data quality
ISO/IEC 25030:2007 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Quality requirements
ISO/IEC 25040:2011 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Evaluation process
ISO/IEC 25041:2012 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Evaluation guide for developers, acquirers and independent evaluators
ISO/IEC 25045:2010 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Evaluation module for recoverability
ISO/IEC 25051:2014 Software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
ISO/IEC TR 25060:2010 Systems and software engineering - Systems and software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: General framework for usability-related information
ISO/IEC 25062:2006 Software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability test reports
ISO/IEC 25063:2014 Systems and software engineering - Systems and software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: Context of use description
ISO/IEC 25064:2013 Systems and software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for usability: User needs report
ISO/IEC 25066:2016 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for Usability—Evaluation Report
ISO/TR 25100:2012 Intelligent transport systems – Systems architecture – Harmonization of ITS data concepts
ISO/TR 25102:2008 Intelligent transport systems – System architecture – 'Use Case' pro-forma template
ISO/TR 25104:2008 Intelligent transport systems – System architecture, taxonomy, terminology and data modelling – Training requirements for ITS architecture
ISO/TS 25110:2017 Electronic fee collection – Interface definition for on-board account using integrated circuit card (ICC)
ISO 25111:2009 Intelligent transport systems – Communications access for land mobiles (CALM) – General requirements for using public networks
ISO 25112:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Mobile wireless broadband using IEEE 802.16
ISO 25113:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Mobile wireless broadband using HC-SDMA
ISO/TS 25114:2010 Intelligent transport systems – Probe data reporting management (PDRM)
ISO 25119 Tractors and machinery for agriculture and forestry – Safety-related parts of control systems
- ISO 25119-1:2010 Part 1: General principles for design and development
- ISO 25119-2:2010 Part 2: Concept phase
- ISO 25119-3:2010 Part 3: Series development, hardware and software
- ISO 25119-4:2010 Part 4: Production, operation, modification and supporting processes
ISO 25178 Geometrical product specifications (GPS) – Surface texture: Areal
ISO/IEC 25185 Identification cards – Integrated circuit card authentication protocols
- ISO/IEC 25185-1:2016 Part 1: Protocol for Lightweight
ISO 25237:2017 Health informatics – Pseudonymization
ISO/TS 25237:2008 Health informatics – Pseudonymization
ISO 25239 Friction stir welding - Aluminium
- ISO 25239-1:2011 Part 1: Vocabulary
ISO/TR 25257:2009 Health informatics – Business requirements for an international coding system for medicinal products
ISO/TS 25377:2007 Hydrometric uncertainty guidance (HUG)
ISO 25378:2011 Geometrical product specifications (GPS) - Characteristics and conditions - Definitions
ISO/TR 25417:2007 Acoustics – Definitions of basic quantities and terms
ISO/IEC 25434:2008 Information technology - Data interchange on 120 mm and 80 mm optical disk using +R DL format - Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed up to 16X)
ISO/IEC 25435:2006 Data Interchange on 60 mm Read-Only ODC - Capacity: 1,8 Gbytes (UMDTM)
ISO/IEC 25436:2006 Information technology - Eiffel: Analysis, Design and Programming Language
ISO/IEC 25437:2012 Information technology – Telecommunications and information exchange between systems – WS-Session – Web services for application session services
ISO/IEC TR 25438:2006 Information technology - Common Language Infrastructure (CLI) - Technical Report: Common Generics
ISO 25539 Cardiovascular implants - Endovascular devices
- ISO 25539-1:2017 Part 1: Endovascular prostheses
- ISO 25539-2:2012 Part 2: Vascular stents
- ISO 25539-3:2011 Part 3: Vena cava filters
ISO 25577:2013 Information and documentation - MarcXchange
ISO 25639 Exhibitions, shows, fairs and conventions
- ISO 25639-1:2008 Part 1: Vocabulary
- ISO 25639-2:2008 Part 2: Measurement procedures for statistical purposes
ISO/TR 25679:2005 Mechanical testing of metals – Symbols and definitions in published standards
ISO 25720:2009 Health informatics – Genomic Sequence Variation Markup Language (GSVML)
ISO/TR 25901 Welding and allied processes - Vocabulary
- ISO/TR 25901-1:2016 Part 1: General terms
- ISO/TR 25901-3:2016 Part 3: Welding processes
- ISO/TR 25901-4:2016 Part 4: Arc welding
ISO 25947 Fireworks – Categories 1, 2 and 3
- ISO 25947-1:2017 Part 1: Terminology
ISO 25964 Information and documentation - Thesauri and interoperability with other vocabularies

ISO 26000 – ISO 26999

ISO 26000:2010 Guidance on social responsibility
ISO 26101:2017 Acoustics – Test methods for the qualification of free-field environments
ISO/TR 26122:2008 Information and documentation - Work process analysis for records
ISO 26162:2012 Systems to manage terminology, knowledge and content - Design, implementation and maintenance of terminology management systems
ISO 26243:2007 Cards for staple fibres spinning – Vocabulary and principles of construction
ISO 26261 Fireworks – Category 4
- ISO 26261-1:2017 Part 1: Terminology
ISO 26262 Road Vehicles - Functional Safety
ISO 26322 Tractors for agriculture and forestry - Safety
- ISO 26322-1:2008 Part 1: Standard tractors
- ISO 26322-2:2010 Part 2: Narrow-track and small tractors
ISO/IEC 26300:2006 Information technology – Open Document Format for Office Applications (OpenDocument) v1.0
ISO 26324:2012 Information and documentation - Digital object identifier system
ISO 26362:2009 Access panels in market, opinion and social research - Vocabulary and service requirements
ISO 26428 Digital cinema (D-cinema) distribution master
- ISO 26428-1:2008 Part 1: Image characteristics
- ISO 26428-2:2008 Part 2: Audio characteristics
- ISO 26428-3:2008 Part 3: Audio channel mapping and channel labeling
- ISO 26428-9:2009 Part 9: Image pixel structure level 3 - Serial digital interface signal formatting
- ISO 26428-11:2011 Part 11: Additional frame rates
- ISO 26428-19:2011 Part 19: Serial digital interface signal formatting for additional frame rates level AFR2 and level AFR4
ISO 26429 Digital cinema (D-cinema) packaging
- ISO 26429-3:2008 Part 3: Sound and picture track file
- ISO 26429-4:2008 Part 4: MXF JPEG 2000 application
- ISO 26429-6:2008 Part 6: MXF track file essence encryption
- ISO 26429-7:2008 Part 7: Composition playlist
- ISO 26429-8:2009 Part 8: Packing list
- ISO 26429-9:2009 Part 9: Asset mapping and file segmentation
- ISO 26429-10:2009 Part 10: Stereoscopic picture track file
ISO 26430 Digital cinema (D-cinema) operations
- ISO 26430-1:2008 Part 1: Key delivery message
- ISO 26430-2:2008 Part 2: Digital certificate
- ISO 26430-3:2008 Part 3: Generic extra-theater message format
- ISO 26430-4:2009 Part 4: Log record format specification
- ISO 26430-5:2009 Part 5: Security log event class and constraints
- ISO 26430-6:2009 Part 6: Auditorium security messages for intra-theater communications
- ISO 26430-9:2009 Part 9: Key delivery bundle
ISO 26433:2009 Digital cinema (D-cinema) - XML data types
ISO/IEC/IEEE 26511:2011 Systems and software engineering - Requirements for managers of user documentation
ISO/IEC/IEEE 26512:2011 Systems and software engineering - Requirements for acquirers and suppliers of user documentation
ISO/IEC 26513:2009 Systems and software engineering - Requirements for testers and reviewers of user documentation
ISO/IEC 26514:2008 Systems and software engineering - Requirements for designers and developers of user documentation
ISO/IEC/IEEE 26515:2011 Systems and software engineering - Developing user documentation in an agile environment
ISO/IEC/IEEE 26531:2015 Systems and software engineering - Content management for product life-cycle, user and service management documentation
ISO/IEC 26550:2015 Software and systems engineering - Reference model for product line engineering and management
ISO/IEC 26551:2016 Software and systems engineering - Tools and methods for product line requirements engineering
ISO/IEC 26555:2015 Software and systems engineering - Tools and methods for product line technical management
ISO/IEC 26557:2016 Software and systems engineering - Methods and tools for variability mechanisms in software and systems product line
ISO/IEC 26558:2017 Software and systems engineering - Methods and tools for variability modelling in software and systems product line
ISO/IEC 26559:2017 Software and systems engineering - Methods and tools for variability traceability in software and systems product line
ISO 26683 Intelligent transport systems – Freight land conveyance content identification and communication
- ISO 26683-1:2013 Part 1: Context, architecture and referenced standards
- ISO 26683-2:2013 Part 2: Application interface profiles
ISO 26684:2015 Intelligent transport systems (ITS) – Cooperative intersection signal information and violation warning systems (CIWS) – Performance requirements and test procedures
ISO 26722:2014 Water treatment equipment for haemodialysis applications and related therapies
ISO 26782:2009 Anaesthetic and respiratory equipment – Spirometers intended for the measurement of time forced expired volumes in humans
ISO 26800:2011 Ergonomics - General approach, principles and concepts
ISO 26824:2013 Particle characterization of particulate systems - Vocabulary
ISO 26825:2008 Anaesthetic and respiratory equipment – User-applied labels for syringes containing drugs used during anaesthesia – Colours, design and performance
ISO/IEC TR 26905:2006 Information technology – Telecommunications and information exchange between systems – Enterprise Communication in Next Generation Corporate Networks (NGCN) involving Public Next Generation Networks (NGN)
ISO 26906:2015 Hydrometry – Fishpasses at flow measurement structures
ISO/IEC 26907:2009 Information technology – Telecommunications and information exchange between systems – High-rate ultra-wideband PHY and MAC standard
ISO/IEC 26908:2009 Information technology – Telecommunications and information exchange between systems – MAC-PHY interface for ISO/IEC 26907
ISO 26909:2009 Springs - Vocabulary
ISO/IEC 26925:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW HS format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed 8X)
ISO/IEC TR 26927:2011 Information technology – Telecommunications and information exchange between systems – Corporate telecommunication networks – Mobility for enterprise communications
ISO/TR 26999:2012 Intelligent transport systems – Systems architecture – Use of process-oriented methodology in ITS International Standards and other deliverables

ISO 27000 – ISO 27999

ISO/IEC 27000:2016 Information technology – Security techniques – Information security management systems – Overview and vocabulary
ISO/IEC 27001:2013 Information technology – Security techniques – Information security management systems – Requirements
ISO/IEC 27002:2013 Information technology – Security techniques – Code of practice for information security controls
ISO/IEC 27003:2017 Information technology – Security techniques – Information security management systems – Guidance
ISO/IEC 27004:2016 Information technology – Security techniques – Information security management – Monitoring, measurement, analysis and evaluation
ISO/IEC 27005:2011 Information technology – Security techniques – Information security risk management
ISO/IEC 27006:2015 Information technology – Security techniques – Requirements for bodies providing audit and certification of information security management systems
ISO/IEC 27007:2017 Information technology – Security techniques – Guidelines for information security management systems auditing
ISO/IEC TR 27008:2011 Information technology – Security techniques – Guidelines for auditors on information security controls
ISO/IEC 27009:2016 Information technology – Security techniques – Sector-specific application of ISO/IEC 27001 – Requirements
ISO/IEC 27010:2015 Information technology – Security techniques – Information security management for inter-sector and inter-organizational communications
ISO/IEC 27011:2016 Information technology – Security techniques – Code of practice for Information security controls based on ISO/IEC 27002 for telecommunications organizations
ISO/IEC 27013:2015 Information technology - Security techniques - Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1
ISO/IEC 27014:2013 Information technology - Security techniques - Governance of information security
ISO/IEC TR 27016:2014 Information technology - Security techniques - Information security management - Organizational economics
ISO/IEC 27017:2015 Information technology - Security techniques - Code of practice for information security controls based on ISO/IEC 27002 for cloud services
ISO/IEC 27018:2014 Information technology - Security techniques - Code of practice for protection of personally identifiable information (PII) in public clouds acting as PII processors
ISO/IEC TR 27019:2013 Information technology - Security techniques - Information security management guidelines based on ISO/IEC 27002 for process control systems specific to the energy utility industry
ISO/IEC TR 27023:2015 Information technology - Security techniques - Mapping the revised editions of ISO/IEC 27001 and ISO/IEC 27002
ISO/IEC 27031:2011 Information technology - Security techniques - Guidelines for information and communication technology readiness for business continuity
ISO/IEC 27032:2012 Information technology - Security techniques - Guidelines for cybersecurity
ISO/IEC 27033 Information technology - Security techniques - Network security
- ISO/IEC 27033-1:2015 Part 1: Overview and concepts
- ISO/IEC 27033-2:2012 Part 2: Guidelines for the design and implementation of network security
- ISO/IEC 27033-3:2010 Part 3: Reference networking scenarios - Threats, design techniques and control issues
- ISO/IEC 27033-4:2014 Part 4: Securing communications between networks using security gateways
- ISO/IEC 27033-5:2013 Part 5: Securing communications across networks using Virtual Private Networks (VPNs)
- ISO/IEC 27033-6:2016 Part 6: Securing wireless IP network access
ISO/IEC 27034 Information technology - Security techniques - Application security
- ISO/IEC 27034-1:2011 Part 1: Overview and concepts
- ISO/IEC 27034-2:2015 Part 2: Organization normative framework
- ISO/IEC 27034-6:2016 Part 6: Case studies
ISO/IEC 27035 Information technology - Security techniques - Information security incident management
- ISO/IEC 27035-1:2016 Part 1: Principles of incident management
- ISO/IEC 27035-2:2016 Part 2: Guidelines to plan and prepare for incident response
ISO/IEC 27036 Information technology - Security techniques - Information security for supplier relationships
- ISO/IEC 27036-1:2014 Part 1: Overview and concepts
- ISO/IEC 27036-2:2014 Part 2: Requirements
- ISO/IEC 27036-3:2013 Part 3: Guidelines for information and communication technology supply chain security
- ISO/IEC 27036-4:2016 Part 4: Guidelines for security of cloud services
ISO/IEC 27037:2012 Information technology – Security techniques – Guidelines for identification, collection, acquisition and preservation of digital evidence
ISO/IEC 27038:2014 Information technology - Security techniques - Specification for digital redaction
ISO/IEC 27039:2015 Information technology - Security techniques - Selection, deployment and operations of intrusion detection and prevention systems (IDPS)
ISO/IEC 27040:2015 Information technology - Security techniques - Storage security
ISO/IEC 27041:2015 Information technology - Security techniques - Guidance on assuring suitability and adequacy of incident investigative method
ISO/IEC 27042:2015 Information technology - Security techniques - Guidelines for the analysis and interpretation of digital evidence
ISO/IEC 27043:2015 Information technology - Security techniques - Incident investigation principles and processes
ISO/IEC 27050 Information technology - Security techniques - Electronic discovery
- ISO/IEC 27050-1:2016 Part 1: Overview and concepts
ISO 27185:2012 Cardiac rhythm management devices - Symbols to be used with cardiac rhythm management device labels, and information to be supplied - General requirements
ISO 27186:2010 Active implantable medical devices – Four-pole connector system for implantable cardiac rhythm management devices – Dimensional and test requirements
ISO 27327 Fans – Air curtain units
- ISO 27327-2:2014 Part 2: Laboratory methods of testing for sound power
ISO 27427:2013 Anaesthetic and respiratory equipment – Nebulizing systems and components
ISO/TS 27527:2010 Health informatics – Provider identification
ISO 27668 Gel ink ball pens and refills
- ISO 27668-1:2017 Part 1: General use
- ISO 27668-2:2009 Part 2: Documentary use (DOC)
ISO/TS 27687:2008 Nanotechnologies – Terminology and definitions for nano-objects – Nanoparticle, nanofibre and nanoplate [Withdrawn: replaced with ISO/TS 80004-2:2015]
ISO 27729:2012 Information and documentation - International standard name identifier (ISNI)
ISO 27730:2012 Information and documentation - International standard collection identifier (ISCI)
ISO 27789:2013 Health informatics – Audit trails for electronic health records
ISO/TS 27790:2009 Health informatics – Document registry framework
ISO 27799:2016 Health informatics—Information security management in health using ISO/IEC 27002
ISO/TR 27809:2007 Health informatics – Measures for ensuring patient safety of health software
ISO/HL7 27931:2009 Data Exchange Standards – Health Level Seven Version 2.5 – An application protocol for electronic data exchange in healthcare environments
ISO/HL7 27932:2009 Data Exchange Standards – HL7 Clinical Document Architecture, Release 2
ISO/HL7 27951:2009 Health informatics – Common terminology services, release 1
ISO/HL7 27953 Health informatics – Individual case safety reports (ICSRs) in pharmacovigilance
- ISO/HL7 27953-1:2011 Part 1: Framework for adverse event reporting
- ISO/HL7 27953-2:2011 Part 2: Human pharmaceutical reporting requirements for ICSR
ISO 27991:2008 Ships and marine technology - Marine evacuation systems - Means of communication

ISO 28000 – ISO 28999

ISO 28000:2007 Specification for security management systems for the supply chain
ISO 28001:2007 Security management systems for the supply chain – Best practices for implementing supply chain security, assessments and plans – Requirements and guidance
ISO 28002:2011 Security management systems for the supply chain – Development of resilience in the supply chain – Requirements with guidance for use
ISO 28003:2007 Security management systems for the supply chain – Requirements for bodies providing audit and certification of supply chain security management systems
ISO 28004 Security management systems for the supply chain – Guidelines for the implementation of ISO 28000
- ISO 28004-1:2007 Part 1: General principles
- ISO 28004-2:2014 Part 2: Guidelines for adopting ISO 28000 for use in medium and small seaport operations
- ISO 28004-3:2014 Part 3: Additional specific guidance for adopting ISO 28000 for use by medium and small businesses (other than marine ports)
- ISO 28004-4:2014 Part 4: Additional specific guidance on implementing ISO 28000 if compliance with ISO 28001 is a management objective
ISO 28005 Security management systems for the supply chain – Electronic port clearance (EPC)
- ISO 28005-1:2013 Part 1: Message structures
- ISO 28005-2:2011 Part 2: Core data elements
ISO/PAS 28007:2012 Ships and marine technology—Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) [Withdrawn: replaced by ISO 28007-1:2015]
ISO 28007 Ships and marine technology - Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract)
- ISO 28007-1:2015 Part 1: General
ISO/TS 28037:2010 Determination and use of straight-line calibration functions
ISO/CIE 28077:2016 Photocarcinogenesis action spectrum (non-melanoma skin cancers)
ISO/TR 28118:2009 Information and documentation - Performance indicators for national libraries
ISO 28178:2009 Graphic technology - Exchange format for colour and process control data using XML or ASCII text
ISO 28219:2009 Packaging - Labelling and direct product marking with linear bar code and two-dimensional symbols
ISO 28238:2010 Compression and injection moulds - Components for gating systems
ISO 28239:2008 Textile machinery – Opener and cleaner for staple fibres preparation – Vocabulary and principles of construction
ISO 28300:2008 Petroleum, petrochemical and natural gas industries – Venting of atmospheric and low-pressure storage tanks
ISO/IEC 28361:2007 Information technology – Telecommunications and information exchange between systems – Near Field Communication Wired Interface (NFC-WI)
ISO/TR 28380 Health informatics – IHE global standards adoption
- ISO/TR 28380-1:2014 Part 1: Process
- ISO/TR 28380-2:2014 Part 2: Integration and content profiles
- ISO/TR 28380-3:2014 Part 3: Deployment
ISO 28401:2010 Light metals and their alloys – Titanium and titanium alloys – Classification and terminology
ISO 28500:2017 Information and documentation - WARC file format
ISO 28560 Information and documentation - RFID in libraries
- ISO 28560-1:2014 Part 1: Data elements and general guidelines for implementation
- ISO 28560-2:2014 Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962
- ISO 28560-3:2014 Part 3: Fixed length encoding
- ISO/TS 28560-4:2014 Part 4: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory
ISO 28564 Public information guidance systems
- ISO 28564-1:2010 Part 1: Design principles and element requirements for location plans, maps and diagrams
- ISO 28564-2:2016 Part 2: Guidelines for the design and use of location signs and direction signs
ISO 28620:2010 Medical devices – Non-electrically driven portable infusion devices
ISO 28640:2010 Random variate generation methods
ISO/TR 28682:2008 Intelligent transport systems – Joint APEC-ISO study of progress to develop and deploy ITS standards
ISO 28801:2011 Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ)
ISO 28902 Air quality – Environmental meteorology
- ISO 28902-1:2012 Part 1: Ground-based remote sensing of visual range by lidar
- ISO 28902-2:2017 Part 2: Ground-based remote sensing of wind by heterodyne pulsed Doppler lidar
ISO/TR 28980:2007 Ophthalmic optics – Spectacle lenses – Parameters affecting lens power measurement

ISO 29000 – ISO 29999

ISO/TS 29001:2010 Petroleum, petrochemical and natural gas industries – Sector-specific quality management systems – Requirements for product and service supply organizations
ISO/IEC 29100:2011 Information technology - Security techniques - Privacy framework
ISO/IEC 29101:2013 Information technology - Security techniques - Privacy architecture framework
ISO/IEC TR 29106:2007 Information technology - Generic cabling - Introduction to the MICE environmental classification
ISO/IEC TR 29107 Information technology - Intelligent homes - Taxonomy of specifications
- ISO/IEC TR 29107-1:2010 Part 1: The scheme
ISO/IEC TR 29108:2013 Information technology - Terminology for intelligent homes
ISO/IEC 29109 Information technology – Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794
- ISO/IEC 29109-1:2009 Part 1: Generalized conformance testing methodology
- ISO/IEC 29109-2:2010 Part 2: Finger minutiae data
- ISO/IEC 29109-4:2010 Part 4: Finger image data
- ISO/IEC 29109-5:2014 Part 5: Face image data
- ISO/IEC 29109-6:2011 Part 6: Iris image data
- ISO/IEC 29109-7:2011 Part 7: Signature/sign time series data
- ISO/IEC 29109-8:2011 Part 8: Finger pattern skeletal data
- ISO/IEC 29109-9:2011 Part 9: Vascular image data
- ISO/IEC 29109-10:2010 Part 10: Hand geometry silhouette data
ISO/IEC 29110 Systems and software engineering - Lifecycle profiles for Very Small Entities (VSEs)^{[Note 3]}
- ISO/IEC TR 29110-1:2016 Part 1: Overview
- ISO/IEC 29110-2-1:2015 Part 2-1: Framework and taxonomy
- ISO/IEC TR 29110-2-2:2016 Part 2-2: Guide for the development of domain-specific profiles
- ISO/IEC TR 29110-3-1:2015 Part 3-1: Assessment guide
- ISO/IEC 29110-3-3:2016 Part 3-3: Certification requirements for conformity assessments of VSE profiles using process assessment and maturity models
- ISO/IEC TR 29110-3-4:2015 Part 3-4: Autonomy-based improvement method
- ISO/IEC 29110-4-1:2011 Part 4-1: Profile specifications: Generic profile group
- ISO/IEC TR 29110-5-1-1:2012 Part 5-1-1: Management and engineering guide: Generic profile group: Entry profile
- ISO/IEC TR 29110-5-1-2:2011 Part 5-1-2: Management and engineering guide: Generic profile group: Basic profile
- ISO/IEC TR 29110-5-1-3:2017 Part 5-1-3: Software engineering - Management and engineering guide: Generic profile group - Intermediate profile
- ISO/IEC TR 29110-5-2-1:2016 Part 5-2-1: Organizational management guidelines
- ISO/IEC TR 29110-5-6-1:2015 Part 5-6-1: Systems engineering - Management and engineering guide: Generic profile group: Entry profile
- ISO/IEC TR 29110-5-6-2:2014 Part 5-6-2: Systems engineering - Management and engineering guide: Generic profile group: Basic profile
ISO/IEC TS 29113:2012 Information technology - Further interoperability of Fortran with C
ISO/IEC 29115:2013 Information technology - Security techniques - Entity authentication assurance framework
ISO/IEC 29119 Software and systems engineering – Software testing
ISO/IEC 29120 Information technology – Machine readable test data for biometric testing and reporting
- ISO/IEC 29120-1:2015 Part 1: Test reports
ISO/IEC 29121:2013 Information technology - Digitally recorded media for information interchange and storage - Data migration method for DVD-R, DVD-RW, DVD-RAM, +R, and +RW disks
ISO/IEC TR 29123:2007 Identification Cards – Proximity Cards – Requirements for the enhancement of interoperability
ISO/IEC 29124:2010 Information technology - Programming languages, their environments and system software interfaces - Extensions to the C++ Library to support mathematical special functions
ISO/IEC TS 29125:2017 Information technology - Telecommunications cabling requirements for remote powering of terminal equipment
ISO/IEC TR 29127:2011 Information technology - System Process and Architecture for Multilingual Semantic Reverse Query Expansion
ISO/IEC 29128:2011 Information technology - Security techniques - Verification of cryptographic protocols
ISO/IEC 29133:2010 Information technology - Automatic identification and data capture techniques - Quality test specification for rewritable hybrid media data carriers
ISO/IEC 29134:2017 Information technology - Security techniques - Guidelines for privacy impact assessment
ISO/IEC 29136:2012 Information technology – User interfaces – Accessibility of personal computer hardware
ISO/IEC TR 29138 Information technology – Accessibility considerations for people with disabilities
- ISO/IEC TR 29138-1:2009 Part 1: User needs summary
- ISO/IEC TR 29138-2:2009 Part 2: Standards inventory
- ISO/IEC TR 29138-3:2009 Part 3: Guidance on user needs mapping
ISO/IEC TS 29140 Information technology for learning, education and training - Nomadicity and mobile technologies
- ISO/IEC TS 29140-1:2011 Part 1: Nomadicity reference model
- ISO/IEC TS 29140-2:2011 Part 2: Learner information model for mobile learning
ISO/IEC 29141:2009 Information technology – Biometrics – Tenprint capture using biometric application programming interface (BioAPI)
ISO/IEC 29143:2011 Information technology - Automatic identification and data capture techniques - Air interface specification for Mobile RFID interrogators
ISO/IEC TR 29144:2014 Information technology – Biometrics – The use of biometric technology in commercial Identity Management applications and processes
ISO/IEC 29145 Information technology - Wireless Beacon-enabled Energy Efficient Mesh network (WiBEEM) for wireless home network services
- ISO/IEC 29145-1:2014 Part 1: PHY Layer
- ISO/IEC 29145-2:2014 Part 2: MAC Layer
- ISO/IEC 29145-3:2014 Part 3: NWK Layer
ISO/IEC 29146:2016 Information technology - Security techniques - A framework for access management
ISO/IEC 29147:2014 Information technology - Security techniques - Vulnerability disclosure
ISO/IEC/IEEE 29148:2011 Systems and software engineering - Life cycle processes - Requirements engineering
ISO/IEC TR 29149:2012 Information technology - Security techniques - Best practices for the provision and use of time-stamping services
ISO/IEC 29150:2011 Information technology - Security techniques - Signcryption
ISO/IEC 29151:2017 Information technology - Security techniques - Code of practice for personally identifiable information protection
ISO/IEC TR 29154:2013 Software engineering - Guide for the application of ISO/IEC 24773:2008 (Certification of software engineering professionals - Comparison framework)
ISO/IEC 29155 Systems and software engineering - Information technology project performance benchmarking framework
- ISO/IEC 29155-1:2017 Part 1: Concepts and definitions
- ISO/IEC 29155-2:2013 Part 2: Requirements for benchmarking
- ISO/IEC 29155-3:2015 Part 3: Guidance for reporting
- ISO/IEC 29155-4:2016 Part 4: Guidance for data collection and maintenance
ISO/IEC TR 29156:2015 Information technology – Guidance for specifying performance requirements to meet security and usability needs in applications using biometrics
ISO/IEC 29157:2015 Information technology – Telecommunications and information exchange between systems – PHY/MAC specifications for short-range wireless low-rate applications in the ISM band
ISO/IEC TR 29158:2011 Information technology - Automatic identification and data capture techniques - Direct Part Mark (DPM) Quality Guideline
ISO/IEC 29159 Information technology – Biometric calibration, augmentation and fusion data
- ISO/IEC 29159-1:2010 Part 1: Fusion information format
ISO/IEC 29160:2012 Information technology - Radio frequency identification for item management - RFID Emblem
ISO/IEC 29161:2016 Information technology - Data structure - Unique identification for the Internet of Things
ISO/IEC TR 29162:2012 Information technology - Guidelines for using data structures in AIDC media
ISO/IEC TR 29163 Information technology - Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition
- ISO/IEC TR 29163-1:2009 Part 1: Overview Version 1.1
- ISO/IEC TR 29163-2:2009 Part 2: Content Aggregation Model Version 1.1
- ISO/IEC TR 29163-3:2009 Part 3: Run-Time Environment Version 1.1
- ISO/IEC TR 29163-4:2009 Part 4: Sequencing and Navigation Version 1.1
ISO/IEC 29164:2011 Information technology – Biometrics – Embedded BioAPI
ISO/IEC TR 29166:2011 Information technology - Document description and processing languages - Guidelines for translation between ISO/IEC 26300 and ISO/IEC 29500 document formats
ISO/IEC 29167 Information technology - Automatic identification and data capture techniques
- ISO/IEC 29167-1:2014 Part 1: Security services for RFID air interfaces
- ISO/IEC 29167-10:2015 Part 10: Crypto suite AES-128 security services for air interface communications
- ISO/IEC 29167-11:2014 Part 11: Crypto suite PRESENT-80 security services for air interface communications
- ISO/IEC 29167-12:2015 Part 12: Crypto suite ECC-DH security services for air interface communications
- ISO/IEC 29167-13:2015 Part 13: Crypto suite Grain-128A security services for air interface communications
- ISO/IEC 29167-14:2015 Part 14: Crypto suite AES OFB security services for air interface communications
- ISO/IEC 29167-16:2015 Part 16: Crypto suite ECDSA-ECDH security services for air interface communications
- ISO/IEC 29167-17:2015 Part 17: Crypto suite cryptoGPS security services for air interface communications
- ISO/IEC 29167-19:2016 Part 19: Crypto suite RAMON security services for air interface communications
ISO/IEC 29168 Information technology - Open systems interconnection
- ISO/IEC 29168-1:2011 Part 1: Object identifier resolution system
- ISO/IEC 29168-2:2011 Part 2: Procedures for the object identifier resolution system operational agency
ISO/IEC 29169:2016 Information technology - Process assessment - Application of conformity assessment methodology to the assessment to process quality characteristics and organizational maturity
ISO/IEC 29170 Information technology - Advanced image coding and evaluation
- ISO/IEC 29170-2:2015 Part 2: Evaluation procedure for nearly lossless coding
ISO/IEC 29171:2009 Information technology - Digitally recorded media for information interchange and storage - Information Versatile Disk for Removable usage (iVDR) cartridge
ISO/IEC TR 29172:2011 Information technology - Mobile item identification and management - Reference architecture for Mobile AIDC services
ISO/IEC 29173 Information technology - Mobile item identification and management
- ISO/IEC 29173-1:2012 Part 1: Mobile RFID interrogator device protocol for ISO/IEC 18000-63 Type C
ISO/IEC 29175:2012 Information technology - Mobile item identification and management - User data for Mobile AIDC services
ISO/IEC 29176:2011 Information technology - Mobile item identification and management - Consumer privacy-protection protocol for Mobile RFID services
ISO/IEC 29177:2016 Information technology - Automatic identification and data capture technique - Identifier resolution protocol for multimedia information access triggered by tag-based identification
ISO/IEC 29178:2012 Information technology - Mobile item identification and management - Service broker for Mobile AIDC services
ISO/IEC 29179:2012 Information technology - Mobile item identification and management - Mobile AIDC application programming interface
ISO/IEC 29180:2012 Information technology – Telecommunications and information exchange between systems – Security framework for ubiquitous sensor networks
ISO/IEC TR 29181 Information technology – Future Network – Problem statement and requirements
- ISO/IEC TR 29181-1:2012 Part 1: Overall aspects
- ISO/IEC TR 29181-2:2014 Part 2: Naming and addressing
- ISO/IEC TR 29181-3:2013 Part 3: Switching and routing
- ISO/IEC TR 29181-4:2013 Part 4: Mobility
- ISO/IEC TR 29181-5:2014 Part 5: Security
- ISO/IEC TR 29181-6:2013 Part 6: Media transport
- ISO/IEC TR 29181-7:2013 Part 7: Service composition
- ISO/IEC TR 29181-8:2017 Part 8: Quality of Service
- ISO/IEC TR 29181-9:2017 Part 9: Networking of everything
ISO/IEC 29182 Information technology – Sensor networks: Sensor Network Reference Architecture (SNRA)
- ISO/IEC 29182-1:2013 Part 1: General overview and requirements
- ISO/IEC 29182-2:2013 Part 2: Vocabulary and terminology
- ISO/IEC 29182-3:2014 Part 3: Reference architecture views
- ISO/IEC 29182-4:2013 Part 4: Entity models
- ISO/IEC 29182-5:2013 Part 5: Interface definitions
- ISO/IEC 29182-6:2014 Part 6: Applications
- ISO/IEC 29182-7:2015 Part 7: Interoperability guidelines
ISO/IEC 29187 Information technology - Identification of privacy protection requirements pertaining to learning, education and training (LET)
- ISO/IEC 29187-1:2013 Part 1: Framework and reference model
ISO/IEC TR 29189:2015 Information technology – Biometrics – Evaluation of examiner assisted biometric applications
ISO/IEC 29190:2015 Information technology - Security techniques - Privacy capability assessment model
ISO/IEC 29191:2012 Information technology - Security techniques - Requirements for partially anonymous, partially unlinkable authentication.
ISO/IEC 29192 Information technology - Security techniques - Lightweight cryptography
- ISO/IEC 29192-1:2012 Part 1: General
- ISO/IEC 29192-2:2012 Part 2: Block ciphers
- ISO/IEC 29192-3:2012 Part 3: Stream ciphers
- ISO/IEC 29192-4:2013 Part 4: Mechanisms using asymmetric techniques
- ISO/IEC 29192-5:2016 Part 5: Hash-functions
ISO/IEC TR 29194:2015 Information Technology – Biometrics – Guide on designing accessible and inclusive biometric systems
ISO/IEC TR 29195:2015 Traveller processes for biometric recognition in automated border control systems
ISO/IEC TR 29196:2015 Guidance for biometric enrolment
ISO/IEC 29197:2015 Information technology - Evaluation methodology for environmental influence in biometric system performance
ISO/IEC TR 29198:2013 Information technology – Biometrics – Characterization and measurement of difficulty for fingerprint databases for technology evaluation
ISO/IEC 29199 Information technology - JPEG XR image coding system
- ISO/IEC TR 29199-1:2011 Part 1: System architecture
- ISO/IEC 29199-2:2012 Part 2: Image coding specification
- ISO/IEC 29199-3:2010 Part 3: Motion JPEG XR
- ISO/IEC 29199-4:2010 Part 4: Conformance testing
- ISO/IEC 29199-5:2012 Part 5: Reference software
ISO 29281 Intelligent transport systems – Communication access for land mobiles (CALM) – Non-IP networking
- ISO 29281-1:2013 Part 1: Fast networking & transport layer protocol (FNTP)
- ISO 29281-2:2013 Part 2: Legacy system support
ISO 29282:2011 Intelligent transport systems – Communications access for land mobiles (CALM) – Satellite networks
ISO 29283:2011 ITS CALM Mobile Wireless Broadband applications using Communications in accordance with IEEE 802.20
ISO/TS 29284:2012 Intelligent transport systems – Event-based probe vehicle data
ISO/IEC 29341 Information technology - UPnP Device Architecture
- ISO/IEC 29341-1:2011 Part 1: UPnP Device Architecture Version 1.0
- ISO/IEC 29341-1-1:2011 Part 1-1: UPnP Device Architecture Version 1.1
- ISO/IEC 29341-1-2:2017 Part 1-2: UPnP Device Architecture Version 2.0
- ISO/IEC 29341-2:2008 Part 2: Basic Device Control Protocol - Basic Device
- ISO/IEC 29341-3-1:2011 Part 3-1: Audio Video Device Control Protocol - Audio Video Architecture
- ISO/IEC 29341-3-2:2008 Part 3-2: Audio Video Device Control Protocol - Media Renderer Device
- ISO/IEC 29341-3-3:2008 Part 3-3: Audio Video Device Control Protocol - Media Server Device
- ISO/IEC 29341-3-10:2015 Part 3-10: Audio Video Device Control Protocol - Audio Video Transport Service
- ISO/IEC 29341-3-11:2008 Part 3-11: Audio Video Device Control Protocol - Connection Manager Service
- ISO/IEC 29341-3-12:2008 Part 3-12: Audio Video Device Control Protocol - Content Directory Service
- ISO/IEC 29341-3-13:2008 Part 3-13: Audio Video Device Control Protocol - Rendering Control Service
- ISO/IEC 29341-4-2:2011 Part 4-2: Audio Video Device Control Protocol - Level 2 - Media Renderer Device
- ISO/IEC 29341-4-3:2008 Part 4-3: Audio Video Device Control Protocol - Level 2 - Media Server Device
- ISO/IEC 29341-4-4:2011 Part 4-4: Audio Video Device Control Protocol - Level 2 - Audio Video Data Structures
- ISO/IEC 29341-4-10:2011 Part 4-10: Audio Video Device Control Protocol - Level 2 - Audio Video Transport Service
- ISO/IEC 29341-4-11:2011 Part 4-11: Audio Video Device Control Protocol - Level 2 - Connection Manager Service
- ISO/IEC 29341-4-12:2008 Part 4-12: Audio Video Device Control Protocol - Level 2 - Content Directory Service
- ISO/IEC 29341-4-13:2011 Part 4-13: Audio Video Device Control Protocol - Level 2 - Rendering Control Service
- ISO/IEC 29341-4-14:2011 Part 4-14: Audio Video Device Control Protocol - Level 2 - Scheduled Recording Service
- ISO/IEC 29341-5-1:2008 Part 5-1: Digital Security Camera Device Control Protocol - Digital Security Camera Device
- ISO/IEC 29341-5-10:2008 Part 5-10: Digital Security Camera Device Control Protocol - Digital Security Camera Motion Image Service
- ISO/IEC 29341-5-11:2008 Part 5-11: Digital Security Camera Device Control Protocol - Digital Security Camera Settings Service
- ISO/IEC 29341-5-12:2008 Part 5-12: Digital Security Camera Device Control Protocol - Digital Security Camera Still Image Service
- ISO/IEC 29341-6-1:2008 Part 6-1: Heating, Ventilation, and Air Conditioning Device Control Protocol - System Device
- ISO/IEC 29341-6-2:2008 Part 6-2: Heating, Ventilation, and Air Conditioning Device Control Protocol - Zone Thermostat Device
- ISO/IEC 29341-6-10:2008 Part 6-10: Heating, Ventilation, and Air Conditioning Device Control Protocol - Control Valve Service
- ISO/IEC 29341-6-11:2008 Part 6-11: Heating, Ventilation, and Air Conditioning Device Control Protocol - Fan Operating Mode Service
- ISO/IEC 29341-6-12:2008 Part 6-12: Heating, Ventilation, and Air Conditioning Device Control Protocol - Fan Speed Service
- ISO/IEC 29341-6-13:2008 Part 6-13: Heating, Ventilation, and Air Conditioning Device Control Protocol - House Status Service
- ISO/IEC 29341-6-14:2008 Part 6-14: Heating, Ventilation, and Air Conditioning Device Control Protocol - Setpoint Schedule Service
- ISO/IEC 29341-6-15:2008 Part 6-15: Heating, Ventilation, and Air Conditioning Device Control Protocol - Temperature Sensor Service
- ISO/IEC 29341-6-16:2008 Part 6-16: Heating, Ventilation, and Air Conditioning Device Control Protocol - Temperature Setpoint Service
- ISO/IEC 29341-6-17:2008 Part 6-17: Heating, Ventilation, and Air Conditioning Device Control Protocol - User Operating Mode Service
- ISO/IEC 29341-7-1:2008 Part 7-1: Lighting Device Control Protocol - Binary Light Device
- ISO/IEC 29341-7-2:2008 Part 7-2: Lighting Device Control Protocol - Dimmable Light Device
- ISO/IEC 29341-7-10:2008 Part 7-10: Lighting Device Control Protocol - Dimming Service
- ISO/IEC 29341-7-11:2015 Part 7-11: Lighting Device Control Protocol - Switch Power Service
- ISO/IEC 29341-8-1:2008 Part 8-1: Internet Gateway Device Control Protocol - Internet Gateway Device
- ISO/IEC 29341-8-2:2008 Part 8-2: Internet Gateway Device Control Protocol - Local Area Network Device
- ISO/IEC 29341-8-3:2008 Part 8-3: Internet Gateway Device Control Protocol - Wide Area Network Device
- ISO/IEC 29341-8-4:2008 Part 8-4: Internet Gateway Device Control Protocol - Wide Area Network Connection Device
- ISO/IEC 29341-8-5:2008 Part 8-5: Internet Gateway Device Control Protocol - Wireless Local Area Network Access Point Device
- ISO/IEC 29341-8-10:2008 Part 8-10: Internet Gateway Device Control Protocol - Local Area Network Host Configuration Management Service
- ISO/IEC 29341-8-11:2008 Part 8-11: Internet Gateway Device Control Protocol - Layer 3 Forwarding Service
- ISO/IEC 29341-8-12:2008 Part 8-12: Internet Gateway Device Control Protocol - Link Authentication Service
- ISO/IEC 29341-8-13:2008 Part 8-13: Internet Gateway Device Control Protocol - Radius Client Service
- ISO/IEC 29341-8-14:2008 Part 8-14: Internet Gateway Device Control Protocol - Wide Area Network Cable Link Configuration Service
- ISO/IEC 29341-8-15:2008 Part 8-15: Internet Gateway Device Control Protocol - Wide Area Network Common Interface Configuration Service
- ISO/IEC 29341-8-16:2008 Part 8-16: Internet Gateway Device Control Protocol - Wide Area Network Digital Subscriber Line Configuration Service
- ISO/IEC 29341-8-17:2008 Part 8-17: Internet Gateway Device Control Protocol - Wide Area Network Ethernet Link Configuration Service
- ISO/IEC 29341-8-18:2008 Part 8-18: Internet Gateway Device Control Protocol - Wide Area Network Internet Protocol Connection Service
- ISO/IEC 29341-8-19:2008 Part 8-19: Internet Gateway Device Control Protocol - Wide Area Network Plain Old Telephone Service Link Configuration Service
- ISO/IEC 29341-8-20:2008 Part 8-20: Internet Gateway Device Control Protocol - Wide Area Network Point-to-Point Protocol Connection Service
- ISO/IEC 29341-8-21:2008 Part 8-21: Internet Gateway Device Control Protocol - Wireless Local Area Network Configuration Service
- ISO/IEC 29341-9-1:2008 Part 9-1: Imaging Device Control Protocol - Printer Device
- ISO/IEC 29341-9-2:2008 Part 9-2: Imaging Device Control Protocol - Scanner
- ISO/IEC 29341-9-10:2008 Part 9-10: Imaging Device Control Protocol - External Activity Service
- ISO/IEC 29341-9-11:2008 Part 9-11: Imaging Device Control Protocol - Feeder Service
- ISO/IEC 29341-9-12:2008 Part 9-12: Imaging Device Control Protocol - Print Basic Service
- ISO/IEC 29341-9-13:2008 Part 9-13: Imaging Device Control Protocol - Scan Service
- ISO/IEC 29341-10-1:2008 Part 10-1: Quality of Service Device Control Protocol - Quality of Service Architecture
- ISO/IEC 29341-10-10:2008 Part 10-10: Quality of Service Device Control Protocol - Quality of Service Device
- ISO/IEC 29341-10-11:2008 Part 10-11: Quality of Service Device Control Protocol - Quality of Service Manager Service
- ISO/IEC 29341-10-12:2008 Part 10-12: Quality of Service Device Control Protocol - Quality of Service Policy Holder Service
- ISO/IEC 29341-11-1:2008 Part 11-1: Quality of Service Device Control Protocol - Level 2 - Quality of Service Architecture
- ISO/IEC 29341-11-2:2008 Part 11-2: Quality of Service Device Control Protocol - Level 2 - Quality of Service Schemas
- ISO/IEC 29341-11-10:2008 Part 11-10: Quality of Service Device Control Protocol - Level 2 - Quality of Service Device Service
- ISO/IEC 29341-11-11:2008 Part 11-11: Quality of Service Device Control Protocol - Level 2 - Quality of Service Manager Service
- ISO/IEC 29341-11-12:2008 Part 11-12: Quality of Service Device Control Protocol - Level 2 - Quality of Service Policy Holder Service
- ISO/IEC 29341-12-1:2015 Part 12-1: Remote User Interface Device Control Protocol - Remote User Interface Client Device
- ISO/IEC 29341-12-2:2015 Part 12-2: Remote User Interface Device Control Protocol - Remote User Interface Server Device
- ISO/IEC 29341-12-10:2015 Part 12-10: Remote User Interface Device Control Protocol - Remote User Interface Client Service
- ISO/IEC 29341-12-11:2015 Part 12-11: Remote User Interface Device Control Protocol - Remote User Interface Server Service
- ISO/IEC 29341-13-10:2008 Part 13-10: Device Security Device Control Protocol - Device Security Service
- ISO/IEC 29341-13-11:2008 Part 13-11: Device Security Device Control Protocol - Security Console Service
- ISO/IEC 29341-14-3:2011 Part 14-3: Audio Video Device Control Protocol - Level 3 - Media Server Device
- ISO/IEC 29341-14-12:2011 Part 14-12: Audio Video Device Control Protocol - Level 3 - Audio Video Content Directory Service
- ISO/IEC 29341-15-10:2011 Part 15-10: Content Synchronization Device Control Protocol - Content Synchronization Service
- ISO/IEC 29341-16-1:2011 Part 16-1: Low Power Device Control Protocol - Low Power
- ISO/IEC 29341-16-10:2011 Part 16-10: Low Power Device Control Protocol - Low Power Proxy Service
- ISO/IEC 29341-16-11:2011 Part 16-11: Low Power Device Control Protocol - Low Power Service
- ISO/IEC 29341-17-1:2011 Part 17-1: Quality of Service Device Control Protocol - Level 3 - Quality of Service Architecture
- ISO/IEC 29341-17-10:2011 Part 17-10: Quality of Service Device Control Protocol - Level 3 - Quality of Service Device Service
- ISO/IEC 29341-17-11:2011 Part 17-11: Quality of Service Device Control Protocol - Level 3 - Quality of Service Manager Service
- ISO/IEC 29341-17-12:2011 Part 17-12: Quality of Service Device Control Protocol - Level 3 - Quality of Service Policy Holder Service
- ISO/IEC 29341-17-13:2011 Part 17-13: Quality of Service Device Control Protocol - Level 3 - Quality of Service Device Service - Underlying Technology Interfaces
- ISO/IEC 29341-18-1:2011 Part 18-1: Remote Access Device Control Protocol - Remote Access Architecture
- ISO/IEC 29341-18-2:2011 Part 18-2: Remote Access Device Control Protocol - Remote Access Client Device
- ISO/IEC 29341-18-3:2011 Part 18-3: Remote Access Device Control Protocol - Remote Access Server Device
- ISO/IEC 29341-18-4:2011 Part 18-4: Remote Access Device Control Protocol - Remote Access Discovery Agent Device
- ISO/IEC 29341-18-10:2011 Part 18-10: Remote Access Device Control Protocol - Remote Access Inbound Connection Configuration Service
- ISO/IEC 29341-18-11:2011 Part 18-11: Remote Access Device Control Protocol - Remote Access Discovery Agent Service
- ISO/IEC 29341-18-12:2011 Part 18-12: Remote Access Device Control Protocol - Remote Access Discovery Agent Synchronization Service
- ISO/IEC 29341-18-13:2011 Part 18-13: Remote Access Device Control Protocol - Remote Access Transport Agent Configuration Service
- ISO/IEC 29341-19-1:2011 Part 19-1: Solar Protection Blind Device Control Protocol - Solar Protection Blind Device
- ISO/IEC 29341-19-10:2011 Part 19-10: Solar Protection Blind Device Control Protocol - Two Way Motion Motor Service
- ISO/IEC 29341-30-1:2017 Part 30-1: IoT management and control device control protocol - IoT management and control architecture overview
- ISO/IEC 29341-30-2:2017 Part 30-2: IoT management and control device control protocol - IoT management and control device
- ISO/IEC 29341-30-10:2017 Part 30-10: IoT management and control device control protocol - Data store service
- ISO/IEC 29341-30-11:2017 Part 30-11: IoT management and control device control protocol - IoT management and control data model service
- ISO/IEC 29341-30-12:2017 Part 30-12: IoT management and control device control protocol - IoT management and control transport generic service
ISO/IEC 29361:2008 Information technology – Web Services Interoperability – WS-I Basic Profile Version 1.1
ISO/IEC 29362:2008 Information technology – Web Services Interoperability – WS-I Attachments Profile Version 1.0
ISO/IEC 29363:2008 Information technology – Web Services Interoperability – WS-I Simple SOAP Binding Profile Version 1.0
ISO 29383:2010 Terminology policies - Development and implementation
ISO 29404:2015 Ships and marine technology - Offshore wind energy - Supply chain information flow
ISO 29461 Air intake filter systems for rotary machinery – Test methods
- ISO 29461-1:2013 Part 1: Static filter elements
ISO 29464:2017 Cleaning of air and other gases – Terminology
ISO/IEC 29500 Information technology – Document description and processing languages – Office Open XML File Formats
- ISO/IEC 29500-1:2016 Part 1: Fundamentals and Markup Language Reference
- ISO/IEC 29500-2:2012 Part 2: Open Packaging Conventions
- ISO/IEC 29500-3:2015 Part 3: Markup Compatibility and Extensibility
- ISO/IEC 29500-4:2016 Part 4: Transitional Migration Features
ISO/TS 29585:2010 Health informatics – Deployment of a clinical data warehouse
ISO 29621:2017 Cosmetics – Microbiology – Guidelines for the risk assessment and identification of microbiologically low-risk products
ISO/IEC 29642:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW DL format - Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed 2,4X)
ISO 29701:2010 Nanotechnologies – Endotoxin test on nanomaterial samples for in vitro systems – Limulus amebocyte lysate (LAL) test
ISO 29781:2008 Prostheses and orthoses – Factors to be included when describing physical activity of a person who has had a lower limb amputation(s) or who has a deficiency of a lower limb segment(s) present at birth
ISO 29782:2008 Prostheses and orthoses – Factors to be considered when specifying a prosthesis for a person who has had a lower limb amputation
ISO 29783 Prosthetics and orthotics - Vocabulary
- ISO 29783-1:2008 Part 1: Normal gait
- ISO 29783-2:2015 Part 2: Prosthetic gait
- ISO 29783-3:2016 Part 3: Pathological gait (excluding prosthetic gait)
ISO/IEC 29794 Information technology – Biometric sample quality
- ISO/IEC 29794-1:2016 Part 1: Framework
- ISO/IEC 29794-4:2017 Part 4: Finger image data
- ISO/IEC TR 29794-5:2010 Part 5: Face image data
- ISO/IEC 29794-6:2015 Part 6: Iris image data
ISO 29821 Condition monitoring and diagnostics of machines – Ultrasound
- ISO 29821-1:2011 Part 1: General guidelines
- ISO 29821-2:2016 Part 2: Procedures and validation
ISO 29845:2011 Technical product documentation – Document types
ISO/IEC 29881:2010 Information technology - Systems and software engineering - FiSMA 1.1 functional size measurement method
ISO/TR 29901:2007 Selected illustrations of full factorial experiments with four factors
ISO 29990:2010 Learning services for non-formal education and training – Basic requirements for service providers
ISO 29991:2014 Language learning services outside formal education – Requirements
ISO 29993:2017 Learning services outside formal education – Service requirements

ISO 30000 – ISO 39999

ISO 30000:2009 Ships and marine technology – Ship recycling management systems – Specifications for management systems for safe and environmentally sound ship recycling facilities
ISO 30002:2012 Ships and marine technology - Ship recycling management systems - Guidelines for selection of ship recyclers (and pro forma contract)
ISO 30003:2009 Ships and marine technology - Ship recycling management systems - Requirements for bodies providing audit and certification of ship recycling management
ISO 30004:2012 Ships and marine technology - Ship recycling management systems - Guidelines for the implementation of ISO 30000
ISO 30005:2012 Ships and marine technology - Ship recycling management systems - Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations
ISO 30006:2010 Ship recycling management systems - Diagrams to show the location of hazardous materials onboard ships
ISO 30007:2010 Ships and marine technology - Measures to prevent asbestos emission and exposure during ship recycling
ISO 30042:2008 Systems to manage terminology, knowledge and content - TermBase eXchange (TBX)
ISO/IEC 30100 Information technology – Home network resource management
- ISO/IEC 30100-1:2016 Part 1: Requirements
- ISO/IEC 30100-2:2016 Part 2: Architecture
- ISO/IEC 30100-3:2016 Part 3: Management application
ISO/IEC 30101:2014 Information technology – Sensor networks: Sensor network and its interfaces for smart grid system
ISO/IEC TR 30102:2012 Information technology - Distributed Application Platforms and Services (DAPS) - General technical principles of Service Oriented Architecture
ISO/IEC TS 30103:2015 Software and Systems Engineering - Lifecycle Processes - Framework for Product Quality Achievement
ISO/IEC TS 30104:2015 Information Technology - Security Techniques - Physical Security Attacks, Mitigation Techniques and Security Requirements
ISO/IEC 30105 Information technology - IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes
- ISO/IEC 30105-1:2016 Part 1: Process reference model (PRM)
- ISO/IEC 30105-2:2016 Part 2: Process assessment model (PAM)
- ISO/IEC 30105-3:2016 Part 3: Measurement framework (MF) and organization maturity model (OMM)
- ISO/IEC 30105-4:2016 Part 4: Terms and concepts
- ISO/IEC 30105-5:2016 Part 5: Guidelines
ISO/IEC 30106 Information technology – Object oriented BioAPI
- ISO/IEC 30106-1:2016 Part 1: Architecture
- ISO/IEC 30106-2:2016 Part 2: Java implementation
- ISO/IEC 30106-3:2016 Part 3: C# implementation
ISO/IEC 30107 Information technology – Biometric presentation attack detection
- ISO/IEC 30107-1:2016 Part 1: Framework
- ISO/IEC 30107-3:2017 Part 3: Testing and reporting
ISO/IEC 30108 Information technology – Biometric Identity Assurance Services
- ISO/IEC 30108-1:2015 Part 1: BIAS services
ISO/IEC TR 30109:2015 Information technology – User interfaces – Worldwide availability of personalized computer environments
ISO/IEC TR 30110:2015 Information technology – Cross jurisdictional and societal aspects of implementation of biometric technologies – Biometrics and children
ISO/IEC 30111:2013 Information technology - Security techniques - Vulnerability handling processes
ISO/IEC TR 30112:2014 Information technology – Specification methods for cultural conventions
ISO/IEC 30113 Information technology – Gesture-based interfaces across devices and methods^{[Note 3]}
- ISO/IEC 30113-1:2015 Part 1: Framework
- ISO/IEC 30113-11:2017 Part 11: Single-point gestures for common system
ISO/IEC TR 30114 Information technology - Extensions of Office Open XML file formats
- ISO/IEC TR 30114-1:2016 Part 1: Guidelines
ISO/IEC 30116:2016 Information technology - Automatic identification and data capture techniques - Optical Character Recognition (OCR) quality testing
ISO/IEC TR 30117:2014 Information technology – Guide to on-card biometric comparison standards and applications
ISO/IEC 30121:2015 Information technology - Governance of digital forensic risk framework
ISO/IEC 30122 Information technology – User interfaces – Voice commands
- ISO/IEC 30122-1:2016 Part 1: Framework and general guidance
- ISO/IEC 30122-2:2017 Part 2: Constructing and testing
- ISO/IEC 30122-3:2017 Part 3: Translation and localization
- ISO/IEC 30122-4:2016 Part 4: Management of voice command registration
ISO/IEC TR 30125:2016 Information technology – Biometrics used with mobile devices
ISO/IEC 30128:2014 Information technology – Sensor networks – Generic Sensor Network Application Interface
ISO/IEC 30129:2015 Information technology - Telecommunications bonding networks for buildings and other structures
ISO/IEC 30130:2016 Software engineering - Capabilities of software testing tools
ISO/IEC TR 30132 Information technology - Information technology sustainability - Energy efficient computing models
- ISO/IEC TR 30132-1:2016 Part 1: Guidelines for energy effectiveness evaluation
ISO/IEC 30134 Information technology - Data centres - Key performance indicators
- ISO/IEC 30134-1:2016 Part 1: Overview and general requirements
- ISO/IEC 30134-2:2016 Part 2: Power usage effectiveness (PUE)
- ISO/IEC 30134-3:2016 Part 3: Renewable energy factor (REF)
ISO/IEC TS 30135 Information technology - Digital publishing - EPUB3
- ISO/IEC TS 30135-1:2014 Part 1: EPUB3 Overview
- ISO/IEC TS 30135-2:2014 Part 2: Publications
- ISO/IEC TS 30135-3:2014 Part 3: Content Documents
- ISO/IEC TS 30135-4:2014 Part 4: Open Container Format
- ISO/IEC TS 30135-5:2014 Part 5: Media Overlay
- ISO/IEC TS 30135-6:2014 Part 6: EPUB Canonical Fragment Identifier
- ISO/IEC TS 30135-7:2014 Part 7: EPUB3 Fixed-Layout Documents
ISO/IEC 30170:2012 Information technology – Programming languages – Ruby
ISO/IEC 30182:2017 Smart city concept model - Guidance for establishing a model for data interoperability
ISO/IEC 30190:2016 Information technology - Digitally recorded media for information interchange and storage - 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Recordable disk
ISO/IEC 30191:2015 Information technology - Digitally recorded media for information interchange and storage - 120 mm Triple Layer (100,0 Gbytes single sided disk and 200,0 Gbytes double sided disk) and Quadruple Layer (128,0 Gbytes single sided disk) BD Recordable disk
ISO/IEC 30192:2016 Information technology - Digitally recorded media for information interchange and storage - 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk
ISO/IEC 30193:2016 Information technology - Digitally recorded media for information interchange and storage - 120 mm Triple Layer (100,0 Gbytes per disk) BD Rewritable disk
ISO 30300:2011 Information and documentation - Management systems for records - Fundamentals and vocabulary
ISO 30301:2011 Information and documentation - Management systems for records - Requirements
ISO 30302:2015 Information and documentation - Management systems for records - Guidelines for implementation
ISO 30400:2016 Human resource management - Vocabulary
ISO 30405:2016 Human resource management – Guidelines on recruitment
ISO/TR 30406:2017 Human resource management – Sustainable employability management for organizations
ISO/TS 30407:2017 Human resource management – Cost-Per-Hire
ISO 30408:2016 Human resource management – Guidelines on human governance
ISO 30409:2016 Human resource management – Workforce planning
ISO 31000:2009 Risk management – Principles and guidelines
ISO/TR 31004:2013 Risk management – Guidance for the implementation of ISO 31000
ISO/IEC 31010:2009 Risk management - Risk assessment techniques
ISO/IEC/IEEE 31320 Information technology - Modeling Languages
- ISO/IEC/IEEE 31320-1:2012 Part 1: Syntax and Semantics for IDEF0
- ISO/IEC/IEEE 31320-2:2012 Part 2: Syntax and Semantics for IDEF1X97 (IDEFobject)
ISO 32000 Document management – Portable document format
ISO/IEC 33001:2015 Information technology - Process assessment - Concepts and terminology
ISO/IEC 33002:2015 Information technology - Process assessment - Requirements for performing process assessment
ISO/IEC 33003:2015 Information technology - Process assessment - Requirements for process measurement frameworks
ISO/IEC 33004:2015 Information technology - Process assessment - Requirements for process reference, process assessment and maturity models
ISO/IEC TR 33014:2013 Information technology - Process assessment - Guide for process improvement
ISO/IEC 33020:2015 Information technology - Process assessment - Process measurement framework for assessment of process capability
ISO/IEC TS 33030:2017 Information technology - Process assessment - An exemplar documented assessment process
ISO/IEC TS 33052:2016 Information technology - Process reference model (PRM) for information security management
ISO/IEC 33063:2015 Information technology - Process assessment - Process assessment model for software testing
ISO/IEC 33071:2016 Information technology - Process assessment - An integrated process capability assessment model for Enterprise processes
ISO/IEC TS 33072:2016 Information technology - Process assessment - Process capability assessment model for information security management
ISO 37001:2016 Anti-bribery management systems
ISO 37120 Sustainable development of communities - Indicators for city services and quality of life
ISO/TR 37137:2014 Cardiovascular biological evaluation of medical devices – Guidance for absorbable implants
ISO 37500:2014 Guidance on outsourcing
ISO/IEC 38500:2015 Information technology - Governance of IT for the organization
ISO/IEC TS 38501:2015 Information technology - Governance of IT - Implementation guide
ISO/IEC TR 38502:2014 Information technology - Governance of IT - Framework and model
ISO/IEC TR 38504:2016 Governance of information technology - Guidance for principles-based standards in the governance of information technology
ISO/IEC 38505 Information technology - Governance of IT - Governance of data
- ISO/IEC 38505-1:2017 Part 1: Application of ISO/IEC 38500 to the governance of data
ISO 39001:2012 Road traffic safety (RTS) management systems - Requirements with guidance for use

ISO 40000 – ISO 49999

ISO/IEC 40180:2017 Information technology – Quality for learning, education and training – Fundamentals and reference framework
ISO/IEC 40210:2011 Information technology - W3C SOAP Version 1.2 Part 1: Messaging Framework (Second Edition)
ISO/IEC 40220:2011 Information technology - W3C SOAP Version 1.2 Part 2: Adjuncts (Second Edition)
ISO/IEC 40230:2011 Information technology - W3C SOAP Message Transmission Optimization Mechanism
ISO/IEC 40240:2011 Information technology - W3C Web Services Addressing 1.0 - Core
ISO/IEC 40250:2011 Information technology - W3C Web Services Addressing 1.0 - SOAP Binding
ISO/IEC 40260:2011 Information technology - W3C Web Services Addressing 1.0 - Metadata
ISO/IEC 40270:2011 Information technology - W3C Web Services Policy 1.5 - Framework
ISO/IEC 40280:2011 Information technology - W3C Web Services Policy 1.5 - Attachment
ISO/IEC 40314:2016 Information technology - Mathematical Markup Language (MathML) Version 3.0 2nd Edition
ISO/IEC 40500:2012 Information technology – W3C Web Content Accessibility Guidelines (WCAG) 2.0
ISO 41011:2017 Facility management - Vocabulary
ISO 41012:2017 Facility management - Guidance on strategic sourcing and the development of agreements
ISO/TR 41013:2017 Facility management - Scope, key concepts and benefits
ISO/IEC 42010:2011 Systems and software engineering – Architecture description
ISO 44001:2017 Collaborative business relationship management systems — Requirements and framework
ISO 45001 Occupational health and safety management systems - Requirements with guidance for use

ISO 50000 - ISO 59999

ISO 50001:2011 Energy management systems – Requirements with guidance for use
ISO 50002:2014 Energy audits – Requirements with guidance for use
ISO 50003:2014 Energy management systems – Requirements for bodies providing audit and certification of energy management systems
ISO 50004:2014 Energy management systems – Guidance for the implementation, maintenance and improvement of an energy management system
ISO 50006:2014 Energy management systems – Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) – General principles and guidance
ISO 50015:2014 Energy management systems – Measurement and verification of energy performance of organizations—General principles and guidance
ISO 50047:2016 Energy savings – Determination of energy savings in organizations
ISO/ASTM 51026:2015 Practice for using the Fricke dosimetry system
ISO/ASTM 51205:2017 Practice for use of a ceric-cerous sulfate dosimetry system
ISO/ASTM 51261:2013 Practice for calibration of routine dosimetry systems for radiation processing
ISO/ASTM 51275:2013 Practice for use of a radiochromic film dosimetry system
ISO/ASTM 51276:2012 Practice for use of a polymethylmethacrylate dosimetry system
ISO/ASTM 51310:2004 Practice for use of a radiochromic optical waveguide dosimetry system
ISO/ASTM 51401:2013 Practice for use of a dichromate dosimetry system
ISO/ASTM 51431:2005 Practice for dosimetry in electron beam and X-ray (bremsstrahlung) irradiation facilities for food processing
ISO/ASTM 51538:2009 Practice for use of the ethanol-chlorobenzene dosimetry system
ISO/ASTM 51539:2013 Guide for use of radiation-sensitive indicators
ISO/ASTM 51540:2004 Practice for use of a radiochromic liquid dosimetry system
ISO/ASTM 51607:2013 Practice for use of the alanine-EPR dosimetry system
ISO/ASTM 51608:2015 Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV
ISO/ASTM 51631:2013 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimetery system calibrations
ISO/ASTM 51649:2015 Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV
ISO/ASTM 51650:2013 Practice for use of a cellulose triacetate dosimetry system
ISO/ASTM 51702:2013 Practice for dosimetry in a gamma facility for radiation processing
ISO/ASTM 51707:2015 Guide for estimation of measurement uncertainty in dosimetry for radiation processing
ISO/ASTM 51818:2013 Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV
ISO/ASTM 51900:2009 Guide for dosimetry in radiation research on food and agricultural products
ISO/ASTM 51939:2017 Practice for blood irradiation dosimetry
ISO/ASTM 51940:2013 Guide for dosimetry for sterile insects release programs
ISO/ASTM 51956:2013 Practice for use of a thermoluminescence-dosimetry system (TLD system) for radiation processing
ISO/ASTM 52116:2013 Practice for dosimetry for a self-contained dry-storage gamma irradiator
ISO/ASTM 52303:2015 Guide for absorbed-dose mapping in radiation processing facilities
ISO/ASTM 52628:2013 Standard practice for dosimetry in radiation processing
ISO/ASTM 52701:2013 Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing
ISO/ASTM 52900:2015 Additive manufacturing - General principles - Terminology
ISO/ASTM 52915:2016 Specification for additive manufacturing file format (AMF) Version 1.2
ISO 55000:2014 Asset management – Overview, principles and terminology
ISO 55001:2014 Asset management – Management systems – Requirements
ISO 55002:2014 Asset management – Management systems – Guidelines for the application of ISO 55001

ISO 60000 - ISO 69999

ISO/IEC/IEEE 60559:2011 Information technology - Microprocessor Systems - Floating-Point arithmetic

ISO 80000 - ISO 89999

ISO/IEC 80000 Quantities and units
ISO/IEC 80001 Application of risk management for IT-networks incorporating medical devices
- IEC 80001-1:2010 Part 1: Roles, responsibilities and activities
- IEC/TR 80001-2-1:2012 Part 2-1: Step by Step Risk Management of Medical IT-Networks; Practical Applications and Examples
- IEC/TR 80001-2-2:2012 Part 2-2: Guidance for the communication of medical device security needs, risks and controls
- IEC/TR 80001-2-3:2012 Part 2-3: Guidance for wireless networks
- IEC/TR 80001-2-4:2012 Part 2-4: General implementation guidance for Healthcare Delivery Organizations
- IEC/TR 80001-2-5:2014 Part 2-5: Application guidance - Guidance for distributed alarm systems
- ISO/TR 80001-2-6:2014 Part 2-6: Application guidance - Guidance for responsibility agreements
- ISO/TR 80001-2-7:2015 Part 2-7: Guidance for healthcare delivery organizations (HDOs) on how to self-assess their conformance with IEC 80001-1
- IEC/TR 80001-2-8:2016 Part 2-8: Application guidance - Guidance on standards for establishing the security capabilities identified in IEC 80001-2-2
- IEC/TR 80001-2-9:2017 Part 2-9: Application guidance - Guidance for use of security assurance cases to demonstrate confidence in IEC/TR 80001-2-2 security capabilities
IEC/TR 80002 Medical device software
- IEC/TR 80002-1:2009 Part 1: Guidance on the application of ISO 14971 to medical device software
- ISO/TR 80002-2:2017 Part 2: Validation of software for medical device quality systems
- IEC/TR 80002-3:2014 Part 3: Process reference model of medical device software life cycle processes (IEC 62304)
ISO/TS 80004 Nanotechnologies – Vocabulary
ISO/IEC/IEEE 80005 Utility connections in port
- ISO/IEC/IEEE 80005-1:2012 Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements
- IEC/IEEE 80005-2:2016 Part 2: High and low voltage shore connection systems - Data communication for monitoring and control
- IEC/PAS 80005-3:2014 Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirements
ISO/IEC 80079 Explosive atmospheres
- ISO/IEC 80079-20-2:2016 Part 20-2: Material characteristics - Combustible dusts test methods
- ISO/IEC 80079-34:2011 Part 34: Application of quality systems for equipment manufacture
- ISO 80079-36:2016 Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements
- ISO 80079-37:2016 Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k''
- ISO/IEC 80079-38:2016 Part 38: Equipment and components in explosive atmospheres in underground mines
ISO/IEC 80369 Small-bore connectors for liquids and gases in healthcare applications
- ISO 80369-1:2010 Part 1: General requirements
- ISO 80369-3:2016 Part 3: Connectors for enteral applications
- IEC 80369-5:2016 Part 5: Connectors for limb cuff inflation applications
- ISO 80369-6:2016 Part 6: Connectors for neuraxial applications
- ISO 80369-7:2016 Part 7: Connectors for intravascular or hypodermic applications
- ISO 80369-20:2015 Part 20: Common test methods
ISO/IEC 80416 Basic principles for graphical symbols for use on equipment
- IEC 80416-1:2008 Part 1: Creation of graphical symbols for registration
- ISO 80416-2:2001 Part 2: Form and use of arrows
- IEC 80416-3:2002 Part 3: Guidelines for the application of graphical symbols
- ISO 80416-4:2005 Part 4: Guidelines for the adaptation of graphical symbols for use on screens and displays (icons)
ISO/IEC 80601 Medical electrical equipment
- ISO 80601-2-12:2011 Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
- ISO 80601-2-13:2011 Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation
- IEC 80601-2-30:2009 Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometers
- ISO 80601-2-55:2011 Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
- ISO 80601-2-56:2017 Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
- IEC 80601-2-58:2014 Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
- IEC 80601-2-59:2017 Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening
- IEC 80601-2-60:2012 Part 2-60: Particular requirements for basic safety and essential performance of dental equipment
- ISO 80601-2-61:2017 Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
- ISO 80601-2-67:2014 Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment
- ISO 80601-2-69:2014 Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment
- ISO 80601-2-70:2015 Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment
- IEC 80601-2-71:2015 Part 2-71: Particular requirements for the basic safety and essential performance of functional Near-Infrared Spectroscopy (NIRS) equipment
- ISO 80601-2-72:2015 Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
- ISO 80601-2-74:2017 Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment
ISO 81060 Non-invasive sphygmomanometers
- ISO 81060-1:2007 Part 1: Requirements and test methods for non-automated measurement type
- ISO 81060-2:2013 Part 2: Clinical investigation of automated measurement type
ISO/IEC 81346 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations
- IEC 81346-1:2009 Part 1: Basic rules
- IEC 81346-2:2009 Part 2: Classification of objects and codes for classes
- ISO/TS 81346-3:2012 Part 3: Application rules for a reference designation system
- ISO/TS 81346-10:2015 Part 10: Power plants
ISO/IEC 81714 Design of graphical symbols for use in the technical documentation of products
- ISO 81714-1:2010 Part 1: Basic rules
- IEC 81714-2:2006 Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange
- IEC 81714-3:2004 Part 3: Classification of connect nodes, networks and their encoding

ISO 90000 - ISO 99999

ISO/IEC 90003:2014 Software engineering - Guidelines for the application of ISO 9001:2008 to computer software
ISO/IEC TR 90005:2008 Systems engineering - Guidelines for the application of ISO 9001 to system life cycle processes
ISO/IEC TR 90006:2013 Information technology - Guidelines for the application of ISO 9001:2008 to IT service management and its integration with ISO/IEC 20000-1:2011

Notes

↑ This list generally excludes draft versions.
↑ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 The exact wording of this title varies between parts. This is the wording of the most recently published part.

References

↑ "Standards catalogue". ISO.
↑ "Freely Available Standards". ISO.
↑ "Compressed air - Energy efficiency - Assessment". Standards catalogue. ISO. Retrieved 23 October 2017.

External links

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[1] This list generally excludes draft versions.

[2] ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".

[VariesBetweenParts-5] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 The exact wording of this title varies between parts. This is the wording of the most recently published part.

[3] "Standards catalogue". ISO.

[4] "Freely Available Standards". ISO.

[6] "Compressed air - Energy efficiency - Assessment". Standards catalogue. ISO. Retrieved 23 October 2017.

ISO standards by standard number
List of ISO standards / ISO romanizations / IEC standards
1–9999	1 2 3 4 5 6 7 9 16 17 31 -0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 128 216 217 226 228 233 259 269 302 306 361 428 500 518 519 639 -1 -2 -3 -5 -6 646 657 668 690 704 732 764 838 843 860 898 965 999 1000 1004 1007 1073-1 1155 1413 1538 1629 1745 1989 2014 2015 2022 2033 2047 2108 2145 2146 2240 2281 2533 2709 2711 2720 2788 2848 2852 3029 3103 3166 -1 -2 -3 3297 3307 3601 3602 3864 3901 3950 3977 4031 4157 4165 4217 4909 5218 5426 5427 5428 5725 5775 5776 5800 5964 6166 6344 6346 6385 6425 6429 6438 6523 6709 6943 7001 7002 7010 7027 7064 7098 7185 7200 7498 -1 7736 7810 7811 7812 7813 7816 7942 8000 8093 8178 8217 8373 8501-1 8571 8583 8601 8613 8632 8651 8652 8691 8805/8806 8807 8820-5 8859 -1 -2 -3 -4 -5 -6 -7 -8 -8-I -9 -10 -11 -12 -13 -14 -15 -16 8879 9000/9001 9036 9075 9126 9141 9227 9241 9293 9314 9362 9407 9506 9529 9564 9592/9593 9594 9660 9797-1 9897 9899 9945 9984 9985 9995
10000–19999	10005 10006 10007 10116 10118-3 10160 10161 10165 10179 10206 10218 10303 -11 -21 -22 -28 -238 10383 10487 10585 10589 10646 10664 10746 10861 10957 10962 10967 11073 11170 11179 11404 11544 11783 11784 11785 11801 11898 11940 (-2) 11941 11941 (TR) 11992 12006 12182 12207 12234-2 13211 -1 -2 13216 13250 13399 13406-2 13450 13485 13490 13567 13568 13584 13616 14000 14031 14224 14289 14396 14443 14496 -2 -3 -6 -10 -11 -12 -14 -17 -20 14644 14649 14651 14698 14750 14764 14882 14971 15022 15189 15288 15291 15292 15398 15408 15444 -3 15445 15438 15504 15511 15686 15693 15706 -2 15707 15897 15919 15924 15926 15926 WIP 15930 16023 16262 16612-2 16750 16949 (TS) 17024 17025 17100 17203 17369 17442 17799 18000 18004 18014 18245 18629 18916 19005 19011 19092 (-1 -2) 19114 19115 19125 19136 19407 19439 19500 19501 19502 19503 19505 19506 19507 19508 19509 19510 19600 19752 19757 19770 19775-1 19794-5 19831
20000+	20000 20022 20121 20400 21000 21047 21500 21827:2002 22000 23270 23271 23360 24517 24613 24617 24707 25178 25964 26000 26300 26324 27000 series 27000 27001 27002 27006 27729 28000 29110 29148 29199-2 29500 30170 31000 32000 38500 40500 42010 55000 80000 -1 -2 -3
Category

International Organization for Standardization
Specifications‎	ISO/PAS 28007:2012 ISO/TS 80004
Technical reports	ISO/IEC TR 12182
Member bodies	Algerian Institute of Standardization American National Standards Institute ANSI-ASQ National Accreditation Board (ANAB) Instituto Argentino de Normalización y Certificación ASC X9 AFNOR Austrian Standards Institute Brazilian National Standards Organization BSI Group Bureau of Normalization Committee for Standardization, Metrology and Certification of Belarus Cyprus Organisation for Standardisation Deutsches Institut für Normung Ente Nazionale Italiano di Unificazione Finnish Standards Association ICONTEC Indian Register Quality Systems Badan Standardisasi Nasional Institute of Standards and Industrial Research of Iran Japanese Industrial Standards Committee Kenya Bureau of Standards Korean Agency for Technology and Standards Korean Standards Association National Standards Authority of Ireland South African Bureau of Standards Standardization Administration of China Standards Australia Standards Council of Canada Standards Institute of Israel Standards Norway State Committee for Technical Regulation and Consumer Policy Swedish Standards Institute Swiss Association for Standardization UN CEFACT TBG5 Vinçotte
Related	Countries in the International Organization for Standardization Information Technology Task Force ISO Development Environment List of International Organization for Standardization standards List of International Organization for Standardization technical committees Quality Objectives