C-stand

An Avenger brand 2-riser C-stand with a Rocky Mountain leg, 2.5" grip head and 40" grip arm. This stand extends to 10'.

In film production, a C-stand (or Century stand)[1][2] is primarily used to position light modifiers, such as silks, nets, or flags, in front of light sources. The stand is constructed of metal and consists of a collapsible base, two riser columns, and a baby pin on top. In addition, a C-stand includes a gobo head and a gobo arm, which provide the ability to articulate a light modifier without moving the stand itself. The legs of C stands are designed to be nested, so many stands can be placed around a light source.

The term C-stand comes from the early history of lighting equipment where a popular sized sun reflector was 100 inches square or "century". Today the term C-stand is a popular name for the grip stand made by Matthews studio equipment and has been copied by other manufacturers.

A secondary use of C-stands is to position smaller light fixtures.[3] A typical use would be to offset a backlight from the stand column, so that the stand itself can be placed out of shot, while the backlight hovers somewhere above the top edge of frame.

In recent years, C-stands have found a new use, supporting the brackets used for balancing Steadicam (and similar) camera sleds. Due to the off-center weight distribution in this practice, it is necessary to use sandbags to add weight to the C-stand leg opposite the camera sled.

Types

A C-stand is sometimes referred to as a "grip stand". While the grip department always carries C stands, sometimes the electric department may as well, for use well as lights that don't mount onto baby or junior stands, such as kinos.

A "baby C-stand" is only 20 inches at its shortest height. It is nicknamed a "Gary Coleman" or a "Billy Barty" stand in the US. In the UK a short flag stand with stubby legs is called a "shotgun" flag stand (a reference to the stand having been "sawn off").

A C-stand with a removable base is called a C-stand with a turtle base. The opening at the top of the turtle base accepts the base of c-stand upright or a junior pin. Turtle bases are great for setting up a light very low to the ground.

A C-stand with an upper most leg which is moveable on the vertical axis is called a Stair Leg C-stand as the unit can be placed on a stairway. Also called a Rocky Mountain leg.

References

  1. Richard K. Ferncase - (1995) - Film and Video Lighting Terms and Concepts pp 28-30, 39.
  2. Professional Cine Photographer magazine How to use grip equipment August 1953 p. 325, 338.
  3. Box, Harry C. "Set lighting technician's handbook" Third Edition, Focal Press, 2003. p. 119.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.