B-roll

In film and television production, B-roll, B roll, B-reel or B reel is supplemental or alternative footage intercut with the main shot.[1] The term A-roll referring to the main footage has fallen out of usage.[2]

Film and video production

Films and videos may cut away from the main story to show related scenery or action. Establishing shots may be used to show the audience the context of the story. These secondary images are often presented without sound, as the sound from the primary footage is expected to continue while the other images are shown. The various shots presented without sound are called B-roll.[3]

B-roll may be shot by smaller second unit crews, since there is no need for sound. In film, smaller MOS cameras may be used for greater portability and ease of setup.[3] In electronic news-gathering (ENG) and documentary film projects, B-roll footage is often shot after the main interview is shot, to provide supporting scenes for what was said by the interview subject.[2] In a docudrama project, B-roll may refer to dramatic re-enactment scenes staged by the producer and performed by actors, to be used as cutaway shots.[4]

B-roll footage may be added to or drawn from a stock footage library.[1][4]

History

16 mm film splices

The term B-roll originates from a particular solution to the problem of visible splices in the narrow film stock used in 16 mm film. 35 mm film was wide enough to hide splices, but 16 mm film revealed the splices as flaws in the picture. To avoid this problem, the intended shots were spliced to opaque black leader, with the black leader hiding the splice. Two sequences of shots were assembled, the odd-numbered shots on the A-roll, and the even-numbered shots on the B-roll, such that all of the shots on one roll were matched by black leader on the other roll, in a checkerboard pattern (an alternate name for the process was "checkerboard printing".) Unexposed 16 mm raw print stock was exposed twice, once to the A-roll, then it was exposed again to the B-roll.[5][6][7]

Telecine transfer

Until the mid-1970s, ENG teams shot both main A-roll and secondary B-roll footage on 16 mm film. Sound was integrated onto the film by way of a magnetic stripe at the edge of the film. The A-roll and B-roll scenes, shot at 24 frames per second, were converted to the television frame rate of 30 fps using a telecine system consisting of two film projectors, one showing the main A-roll footage and the other showing the B-roll. The sound from the A-roll footage was used, or sound from narration or voiceover, while MOS images from the B-roll were intercut as desired.[2]

Linear video tape editing

In the 1980s, the term B-roll was adopted for linear video editing using at least two video tape machines. Traditionally, the tape decks in an edit suite were labeled by letter, with the 'A' deck being the one containing the main tape upon which the main action material was shot. The 'B' deck was used to run tapes that held additional footage such as establishing shots, cutaway shots, and any other supporting footage. The sound was usually taken from the A deck alone, so that the B deck provided video without sound.[3] As linear editing systems were unable to dissolve between clips on the same tape, an edit decision list (EDL) was used to mark clips as "A-roll" and "B-roll" to indicate source machines.

See also

References

  1. 1 2 Bowen, Christopher J.; Thompson, Roy (2011). Grammar of the Shot. Taylor & Francis. p. 240. ISBN 9780240526010.
  2. 1 2 3 Compesi, Ronald; Gomez (2015). Introduction to Video Production: Studio, Field, and Beyond. CRC Press. p. 268. ISBN 9781317347156.
  3. 1 2 3 Irving, David K.; Rea, Peter W. (2014). Producing and Directing the Short Film and Video. CRC Press. p. 172. ISBN 9781136048425.
  4. 1 2 Wales, Lorena M. (2017). The Complete Guide to Film and Digital Production: The People and The Process. Taylor & Francis. p. 17. ISBN 9781315294889.
  5. Ascher, Steven; Pincus, Edward (2007). The Filmmaker's Handbook: A Comprehensive Guide for the Digital Age. Penguin. p. 669. ISBN 9780452286788.
  6. Case, Dominic (April 26, 2013). Film Technology in Post Production. Taylor & Francis. p. 108. ISBN 9781136049781.
  7. Spottiswoode, Raymond (1966), Film and its techniques. U. Cal Press. Chapter 1, p 44.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.