FMA AeC.1

AeC.1
Role Utility aircraft
Manufacturer FMA
First flight 28 October 1931
Number built 1

The FMA AeC.1 was a light utility aircraft built in Argentina in 1931; it was the first aircraft of domestic design to be produced by FMA. It was a low-wing cantilever monoplane of conventional configuration with fixed tailskid undercarriage. As originally designed, the fully enclosed cabin had three seats, but this was later reduced to two. The passenger seat could be readily removed to make way for a stretcher to facilitate its use as an air ambulance.


Specifications

General characteristics

  • Crew: One pilot
  • Capacity: 2 passengers
  • Length: 7.75 m (25 ft 5 in)
  • Wingspan: 12.00 m (39 ft 4 in)
  • Height: 3.16 m (10 ft 4 in)
  • Wing area: 16.9 m2 (182 ft2)
  • Empty weight: 700 kg (1,540 lb)
  • Gross weight: 1,120 kg (2,470 lb)
  • Powerplant: 1 × Armstrong Siddeley Mongoose, 112 kW (150 hp)

Performance

  • Maximum speed: 180 km/h (110 mph)
  • Range: 1,300 km (810 miles)
  • Service ceiling: 4,300 m (14,100 ft)
  • Rate of climb: 3.3 m/s (660 ft/min)

References

  • Taylor, Michael J. H. (1989). Jane's Encyclopedia of Aviation. London: Studio Editions. p. 393.
  • World Aircraft Information Files. London: Bright Star Publishing. pp. File 894 Sheet 27.

Media related to Ae.C.1 at Wikimedia Commons

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.