< Puredyne < Creating a live USB stick
How to create a bootable Puredyne USB Pen
You Will Need:
- A computer that boots from USB.
- A Puredyne bootable USB stick- there are other methods of doing this, but I use one Puredyne stick to make more.
- A Linux-friendly internet connection (not a dongle).
- A Puredyne iso file, downloadable from http://puredyne.org.
- An empty 4 gig (or greater) memory-stick to make puredyne bootable.
Method
- Boot up your computer with your Linux bootable memory-stick, live-CD or live-DVD, whatever method.
- Install UNetbootin. You can do this by opening up terminal and typing
sudo apt-get install unetbootin
- Open up Gparted.
- plug in the memory stick you want to make bootable.
- In the file-Manager window unmount the volume(s) that appear. (right-click > Unmount Volume)
- In Gparted, go to Gparted > Refresh Devices.
- In the drop-down top-right of Gparted, select the last drive in the list. this will be the drive you last plugged in - but make sure that it's size, names, partitions, etc, agree with what you know about the drive. Chances are, the computer's hard-drive will be /dev/sda , the USB you're booting off will be /dev/sdb , and the one you're setting up to be a
- Delete all the partitions on this drive (right-click > Delete)
- Use right-click > New Partition to create the following partitions:\\
section 1 size: 1.3 gig (slightly bigger than the ISO file) file system: FAT16 name: puredyne
section 2 size: the rest of the stick file system: ext3 name: live-rw
- Select Edit > Apply all Operations to make Gparted do that that you have told it to do. Shut Gparted.
- Unplug / replug the USB pen you're putting onwhich you're installing Puredyne to re-mount it.
- Load up UNetbootin. Find your ISO image and put it on the puredyne partition of the new disk.
This article is issued from
Wikibooks.
The text is licensed under Creative
Commons - Attribution - Sharealike.
Additional terms may apply for the media files.